Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Bathroom Remodeling: The Arlington Owner’s Guide
ECO Window Systems bathroom remodeling in Arlington runs $9,000 to $28,000 installed, and most projects are scheduled rather than rushed, because a bathroom rebuild is a multi-week job from demo to final inspection. If you’re here because an ECO Window Systems shower, door, or glass enclosure in your Arlington home has started to fail, you already know the symptom: a door that won’t close flush, water where water shouldn’t be, or a gasket that crumbles every time you touch it.
We’re Barrett & Sons Construction, and we’re an independent contractor. We’re not affiliated with ECO Window Systems. We work with Arlington homeowners who own these systems and need the failed part matched correctly, replaced cleanly, and installed to hold up in North Texas heat and humidity swings. What follows is the honest version of what we’ve learned working on these units in Arlington, TX.
Key Takeaways
- Typical ECO Window Systems bathroom remodel scope in Arlington: $9,000 – $28,000 installed.
- Most failures we see are door rollers, seals, and glass gaskets, not the framing itself.
- The part has to match your exact series; ECO Window Systems changed frame profiles across model years.
- We pull permits on eligible jobs and issue written change orders before any scope changes.
- Calls are answered by a live person 24/7 at (888) 590-9867.
Which ECO Window Systems Models This Applies To
ECO Window Systems has produced shower enclosures, glass doors, and window-wall components across several product lines, and the frames aren’t interchangeable between them. Before you order a single part, find the manufacturer label. It’s usually on the door frame’s inner stile, on the track, or on a small sticker near the hinge plate. Photograph it. Measure the glass panel height and width to the nearest sixteenth of an inch, and measure the track depth.
Here’s the gotcha that bites Arlington owners: ECO Window Systems revised its lower track profile partway through its production run, and the older rollers won’t seat in the newer track. The two look identical on a shelf. If you order off model year alone, you may get the wrong part twice before you get it right. Match by the profile stamped on the label, not the year.
On the OEM-versus-aftermarket question, our honest take is that quality aftermarket rollers and seals from a reputable glass hardware supplier perform fine, and OEM parts are worth the wait when you’re matching a discontinued frame. We don’t stock parts and we don’t carry them on a truck. What we do is source the correct part for your exact ECO Window Systems model before we schedule the install, so the job doesn’t stall waiting on a backorder.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ECO Window Systems Bathroom Remodeling Is Failing
Most Arlington owners don’t call because of one dramatic break. They call because something has been slowly getting worse for months. These are the signs we see most often:
- The shower door drags or won’t close flush. Worn or seized rollers are usually the cause, and the bottom track is often bent from years of weight riding on it.
- Water pooling on the bathroom floor after every shower. The door sweep or bottom seal has hardened and lost its lip, which happens fast in Arlington’s summer heat.
- Cloudy or scratched glass you can’t clean off. Mineral scale and hard water etch the glass surface over time; once it’s etched, no cleaner fixes it.
- A gasket that crumbles when you touch it. Rubber seals dry out and crack in North Texas temperature swings. That’s a seal failure, not a frame failure.
- Mold along the caulk line or behind the frame. Usually a sign water has been getting behind the enclosure for a while, and it’s worth opening up to check the wall behind.
Replacement Cost & What’s Included
A full bathroom remodel in Arlington runs $9,000 to $28,000. A small bathroom remodel runs $5,000 to $12,000. If your ECO Window Systems issue is isolated, these line items give you a truer picture:
| Scope | Arlington Price Range |
|---|---|
| Bathroom remodel, full | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What drives the range: whether tile and waterproofing get replaced, whether the layout changes, and whether the wall behind the enclosure shows water damage. Parts and labor are broken out line by line in the written estimate. Every price change comes as a written change order before work proceeds, and every eligible job gets permits pulled and inspections signed. The work is backed by a written 90-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check the label, measure the panels, tighten visible screws, and clean mineral scale off the glass. What we’d steer you away from is tearing out a glass enclosure or tracing water damage into the wall yourself. Tempered shower glass is heavy, it can shatter in a bad way, and a shower wall that’s been leaking behind tile for months can hide rotted framing and mold. That’s a job for someone who has dealt with it before.
If the enclosure itself is sound and only the door hardware has failed, that’s a smaller scope and we’ll tell you so on the phone. Call (888) 590-9867 for a free estimate. We’ll photograph what you have, confirm the ECO Window Systems part match, and give you a real number in writing.
FAQs
Plan on 10 to 15 years for the hardware (rollers, sweeps, seals) and 20 or more for the glass and frame if the enclosure was installed and sealed correctly. Arlington’s heat and humidity shorten the seal lifespan, so we often see sweeps and gaskets failing before the rest of the unit does.
Yes, in many cases. Worn rollers, sweeps, and gasket seals are replaceable without pulling the enclosure, and that’s usually the right call when the glass and frame are still solid. If the track is bent or the wall behind it has taken on water, repair stops making sense. Call (888) 590-9867 and we’ll tell you which situation you’re in.
A hardware-only fix (rollers, seal, sweep) is typically a single visit. A full shower replacement in Arlington is a scheduled multi-day project once permits are pulled, because inspection has to happen between demo and final tile or glass. Nobody rebuilds a shower in a day, and anyone who says otherwise isn’t pulling permits.
We identify the model from the manufacturer label and the measured glass and track dimensions, then order the correct part before we schedule the install. If the part is discontinued, we match a quality aftermarket equivalent to the exact track profile. We don’t carry parts on a truck, so this is a planned step, not a same-day fix. We also work with KraftMaid, Cambria, and Silestone when a full remodel includes cabinetry or counters.
Schedule Your Free Estimate
If your ECO Window Systems bathroom in Arlington has a failed door, a leaking seal, or glass that’s past saving, we’ll come look at it, confirm the model, and give you a written estimate with the part and labor broken out. No trip charge inside the county. We also offer a free second opinion on any written estimate and $40 off any repair over $200, plus a permanent 10% Senior & Veteran discount. Call (888) 590-9867 to schedule your free estimate.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.