Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Arlington Homeowners Choose ECO Window Systems Construction
We provide independent ECO Window Systems construction, repair, and replacement service in Arlington, and we are not affiliated with, authorized by, or endorsed by the manufacturer. What sets our ECO Window Systems work apart is that we see these units every week across Arlington’s housing stock, from the builder-grade vinyl single-hungs in 1970s ranches to the aluminum units on newer infill near the Entertainment District. Our crews follow ECO’s published installation spec and warranty-safe practices, and our technicians bring up to 28 years of experience to each call. Call (888) 590-9867 to schedule a free estimate.
Why Trust Barrett & Sons Construction Arlington for Your ECO Window Systems Construction?
Arlington sits in the DFW hail belt on Blackland Prairie clay, and windows here take a beating that ECO’s factory literature doesn’t describe. Thermal cycling between 100-degree summers and spring hail events works vinyl frames and perimeter seals loose. We know where ECO Window Systems units actually fail: the balance system on their single-hung series, the roller assembly on their sliding glass doors, and the corner seals that pull away when clay soil heaves the slab beneath a window opening.
Our crew members are background-checked, and they work with OEM-matched ECO components whenever supply allows – sashes, spiral balances, tilt-latches, rollers, and weatherstrip. Every eligible job gets permits pulled and inspections signed, and every price change arrives as a written change order before we touch the unit. We do not claim to be an authorized ECO Window Systems dealer or service center, so we won’t tell you a repair is covered under warranty when it isn’t. What we do offer is honest diagnosis, written scope, and materials you can look up.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common ECO Window Systems Construction Problems We Fix in Arlington
These are the failures we see most often on ECO Window Systems products in Arlington, and what actually causes each one:
- Single-hung sash that won’t stay up. On ECO’s builder-grade vinyl single-hung series, the spiral balances wear out faster than the sash itself. After a few North Texas summers, the balance loses tension, the sash drifts down, and the tilt-latch may pop loose when the sash is removed for cleaning. It’s usually a balance problem, not a whole-window problem.
- Sliding glass door that drags or won’t latch. ECO’s vinyl sliding glass door rollers flatten under the weight of the door panel, and Arlington’s grit and storm-driven dust pack into the bottom track. The door jumps the track, drags, or stops latching because the panel no longer sits square in the frame.
- Fogged glass between panes. Seal failure on ECO’s dual-pane units lets moisture in, and the result is that cloudy haze you can’t clean off. It’s a seal failure, not dirt, and it only gets worse. Heat and daily thermal movement accelerate it.
- Perimeter sealant and foam failure. Vinyl frames expand and contract with Arlington’s temperature swings, and Blackland Prairie clay moves beneath the openings. The perimeter foam and sealant crack, letting air and water infiltrate around the frame – often showing up as a draft or a wet sill after a hard rain.
- Hardware corrosion on the aluminum series. ECO’s aluminum patio and storefront-style units hold up structurally, but the hardware – handles, latches, and fasteners – corrodes under constant sun and storm-driven rain. Stiff or stuck hardware on these units is usually a hardware replacement, not a frame problem.
ECO Window Systems Parts & Our Repair-vs-Replace Approach
For ECO Window Systems repairs, we prioritize OEM-matched sash, balance, roller, and weatherstrip components when they’re available, and use quality aftermarket equivalents only when OEM supply is slow or a part has been discontinued. We source parts per job rather than pulling from a stocked shelf, which means an accurate fit for your specific series instead of a generic part that almost works.
The repair-or-replace decision comes down to the frame. A single failed sash or a worn door roller is an honest repair, and we’ll tell you so. When the frame is bowed, when multiple seals have failed across several units, or when the perimeter has been leaking long enough to damage the rough opening, replacement is the better long-term spend. We’ll show you what we find and put the options in writing. Call (888) 590-9867 for a free second opinion on any written estimate.
Our ECO Window Systems Service Process – Step by Step
- 1
Diagnosis. We confirm the exact ECO Window Systems model line – single-hung, double-hung replacement, sliding glass door, or aluminum series – then test the balance, roller, latch, and perimeter seal to find the real cause, not just the symptom.
- 2
Repair or installation. We replace the failed component with an OEM-matched part, reseal the frame perimeter, or install a new unit per ECO’s published spec. Any scope change is a written change order before work proceeds.
- 3
Test. We operate every sash, door, and latch, check for square, confirm the seal, and verify no air or water infiltration at the perimeter. If the job needs a permit, the inspection is signed before we call it done.
- 4
Warranty. Every completed job is backed by our written 90-Day Done Right Promise. If something isn’t right, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterECO Window Systems Products We Service & Install in Arlington
We service and install across the ECO Window Systems lineup found in Arlington homes: the Vinyl Single-Hung builder-grade series common in central and east Arlington ranches, the Double-Hung Vinyl Replacement line used in older-home upgrades, the Vinyl Sliding Glass Door on patios and sunrooms, and the Aluminum Series patio and storefront-style units. Whether it’s a balance replacement on a single-hung or a full window replacement on a post-storm rebuild, we handle the diagnosis and the install. We don’t claim to stock every part – we source what your specific unit needs.
We Also Service These Brands
ECO Window Systems is one brand among many we work with across Arlington. We also service and install KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures, alongside window and roofing work on GAF and CertainTeed systems and Andersen and Marvin windows. That multi-brand depth means you’re not stuck with a single-brand shop when your project spans more than one trade.
FAQs – ECO Window Systems Construction Service in Arlington
Is Barrett & Sons Construction Arlington authorized by ECO Window Systems? No. We are an independent ECO Window Systems service provider in Arlington and are not authorized, endorsed, or affiliated with the manufacturer. We follow ECO’s published installation spec and warranty-safe practices, but we can’t perform manufacturer warranty work on their behalf.
Do you use genuine ECO Window Systems/OEM parts? We prioritize OEM-matched ECO components – sashes, balances, rollers, and weatherstrip – when they’re available, and use quality aftermarket equivalents when OEM supply is slow or a part is discontinued. We’ll tell you which you’re getting before we order.
How long does ECO Window Systems service take? A single balance or roller replacement is often a same-visit repair. A window replacement or impact window installation runs longer depending on unit count and whether permits and inspections are involved. We give you a written timeline up front.
What ECO Window Systems models/series do you cover? We cover the Vinyl Single-Hung, Double-Hung Vinyl Replacement, Vinyl Sliding Glass Door, and Aluminum Series units. If you’re unsure which series you have, we can identify it during the estimate.
Will service void my ECO Window Systems warranty? Proper repair and installation using OEM-matched parts and ECO’s installation spec is the warranty-safe path. Because we’re independent, we can’t speak for the manufacturer, and we’ll flag anything that could affect a claim before we start.
How much does ECO Window Systems construction cost in Arlington? Window replacement runs $4,500 – $15,000, impact window installation $8,000 – $25,000, roof repair $400 – $1,800, and roof replacement $8,000 – $20,000. Call (888) 590-9867 for an exact quote – estimates are free.
Book Your ECO Window Systems Service in Arlington, TX
Whether it’s a sash that won’t stay up, a patio door that drags, or a full replacement after a hail storm, we’ll diagnose it honestly and put the scope in writing. Call (888) 590-9867 for a free estimate and a second opinion on any written quote you already have. Estimates are free, and a live person answers the phone.
Written by the team at Barrett & Sons Construction Arlington.