A Barrett company - serving Arlington, TX
E

ES Windows Roofing in Arlington, TX

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ES Windows Roofing: The Arlington Owner’s Guide

ES Windows rooftop components – ridge vents, roof-integrated flashings, and the batten and cap trim that ties a roof to the window head – can be replaced or refastened as part of a roofing repair in Arlington that typically runs $400 – $1,800, with full roof replacement at $8,000 – $20,000 when the water intrusion has gone further than the flashing line. If a storm or a hard freeze left you with a ceiling stain, a rusted ridge vent, or a window head that weeps every time it rains sideways, you’re looking at a failed roof detail, not a window problem. We install ES Windows-compatible roofing details across Arlington and identify the exact part by label and measurement before anything is ordered, and we’re an independent service provider – not affiliated with ES Windows.

Call (888) 590-9867

Most Arlington owners find this the same way: a brown ring on the ceiling under the ridge, a rust streak down the gable, or water tracking along the window head after a spring hailstorm. It almost never starts as an obvious hole. It starts as a failed seal or a lifted flashing that lets water creep for a season or two before you see it indoors.

Key Takeaways

  • Roof-level ES Windows details (ridge vents, flashings, head trim) are repaired within a $400 – $1,800 range, and full replacement runs $8,000 – $20,000.
  • Identify the part by its ES Windows label and measurement before ordering – guesswork is the #1 cause of wrong-part returns.
  • Texas heat and hail kill seals and lift flashing faster than in cooler climates, so lifespan runs shorter here.
  • We carry no parts on a truck and stock nothing – we verify the part and order it to your model. That’s how you avoid a second failed repair.

Which ES Windows Models This Applies To

ES Windows uses a line of roof-integrated and trim components matched to the window series and the head, jamb, and sill geometry of that series. The parts we see fail most on Arlington roofs are the ridge vent sections, the head flashing kits that marry the roof plane to the window head, and the batten and cap trim that carries water away from the window frame. The exact part is model-specific – a vent section for one ES series will not seat correctly on another.

Start with the label. Open the window and look on the head jamb or the sash edge for the ES Windows manufacturer label; it carries the series and, in most cases, a date code. If the label is faded or gone, measure the rough opening and the flashing leg length to the sixteenth of an inch and photograph the roof-to-window junction. That combination gets us to the right part number.

On OEM versus aftermarket: for critical roof-to-window sealing, OEM flashing kits are worth the premium because the geometry is exact and the seal is engineered to the series. For ridge vents and batten trim, a quality aftermarket equivalent – matched on dimensions, material gauge, and finish – performs identically at a lower cost. We’ll tell you honestly which is which for your ES Windows model, and we don’t carry or stock parts, so every part is ordered to your job.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your ES Windows Roofing Is Failing

  • Water staining on the ceiling or wall below the ridge or window head. This points to a lifted or failed flashing seal letting water track under the roofing and into the assembly, not a surface leak.
  • Rust streaks or corrosion on the vent or trim. Texas humidity and standing water on a poorly pitched detail corrode the fasteners and the metal, and once the coating breaks down the part is on borrowed time.
  • Visible gaps, lifts, or curling at the window head flashing. Sun and thermal cycling shrink and lift the sealant and flashing leg; that gap is the entry point for the next rain event.
  • Granule loss and shingle wear concentrated along the vent line. Heat buildup at a blocked or failed ridge vent accelerates shingle aging right where the vent meets the field – a sign the vent itself isn’t exhausting properly.
  • Daylight or drafts at the ridge or window head. If you can see light or feel air movement, the vent or flashing has separated and the roof detail is no longer weather-tight.

One reality specific to Arlington: post-storm and spring-hail cycles here routinely lift flashing legs and crack vent seams that would hold for years in a milder climate. A part that should last 15 – 20 years can fail in 8 – 12 on a Texas roof if the detail wasn’t sealed and fastened correctly the first time.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Arlington, expect the following installed ranges. Repairs to the flashing, vent, or trim typically land in the $400 – $1,800 roof repair band; if the failed detail has compromised the surrounding shingles, a full roof replacement runs $8,000 – $20,000. We give you a written line-item quote – part, labor, and any tear-off or deck repair – so you see exactly what you’re paying for before work starts.

  • Ridge vent section replacement (part + labor): generally sits in the lower half of the $400 – $1,800 repair range.
  • Window head flashing kit, sealed and refastened: mid-range of the repair band, driven by access and how much shingle must be lifted.
  • Batten and cap trim replacement: scaled to linear footage and roof pitch.
  • Full roof replacement when the detail failure has spread: $8,000 – $20,000 depending on square footage, pitch, and material.

What drives the range: roof pitch and access, how much shingle and underlayment must be removed to reach the part, and whether decking underneath has soft spots from long-term intrusion. Our technicians have up to 28 years of experience with roof-to-window details, and the work is backed by our written 90-Day Done Right Promise.

DIY or Call Us?

You can safely check a few things yourself: look for ceiling stains, run a garden hose test at the window head on a dry day to see where water tracks, and photograph the roof detail from a ladder at ground level. Measure and record the ES Windows label – that’s useful prep and costs nothing.

What we don’t recommend is climbing onto a pitched roof to lift shingles and reseal flashing yourself. A failed roof-to-window detail is a fall hazard and a water-intrusion risk, and an improper reseal traps moisture and rots the decking underneath – turning a $400 – $1,800 repair into a $8,000-plus roof replacement. On a steep or high roof, this is a trained-professional job, plain and simple. Call (888) 590-9867 and we’ll take a look, measure the part, and give you a written quote before anything is ordered.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch