Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Construction in Keller, TX | Barrett & Sons Construction Arlington
Barrett & Sons Construction Arlington provides independent ES Windows service across Keller, TX, working on the brand’s vinyl single-hung, double-hung, slider, and fixed units every week. The thing that makes our ES Windows work here different is that Keller sits on two construction timelines at once: 1980s-90s brick homes in 76248 that are ready for full-unit swaps, and 2000s-2010s tract builds in 76244 still on factory units where a failed glass unit can often be repaired in place. We read ES shop drawings, match extrusion profiles and glazing packages to the opening, and install and service to manufacturer spec. We’re not authorized, sponsored, or endorsed by ES Windows. Independent, plain-spoken, and reachable at (888) 590-9867.
Why Keller Residents Choose Us for ES Windows Service
Keller homeowners call us because we know the ES product line the way a good mechanic knows one engine family. We know the 2000 Series single-hung is the most common replacement unit in the older brick neighborhoods, and that the E1 and E3 Series units from the new-construction era are still sitting in a lot of 76244 walls. We know which sashes are still in production and which profiles have gone away, which saves you from a parts chase that ends in a dead end.
OEM-compatible parts matter here. An aftermarket tilt latch on an ES double-hung will hold for a season and then start letting in Blackland Prairie dust. When the profile is still made, we use ES parts. When it isn’t, we tell you straight.
Response is quick because the work is local. Keller is a short drive, and a cloudy pane or a sash that won’t latch gets looked at before it turns into a water problem behind the brick.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common ES Windows Construction Problems We Solve in Keller
- Warped vinyl sashes on south and west elevations. ES single-hung units facing the afternoon sun take the worst of it. Attic-heated frame cavities plus 100°F-plus Keller summers move the vinyl until the sash drags or won’t latch. West-facing walls in 76248 catch this most.
- Fogged insulated glass units. Older ES replacement windows show a hazy film between the panes once the seal fails after years of thermal cycling. It’s a cosmetic problem first and a performance problem later, and Keller’s spring-to-summer temperature swings speed it up.
- Worn weatherstripping and tilt latches. ES double-hung and slider models lose their seals over time. That lets wind-driven rain and dust track in around the sash during spring storm season, which is when Keller homeowners notice the draft.
- Sill pan and flashing failures at the rough opening. On 1980s-90s brick homes, original install detailing has aged out. Water tracks behind the brick veneer and shows up as a stain on the interior drywall, not at the window. This one hides.
- Out-of-square frames from slab movement. Keller’s expansive clay soils shift between wet springs and dry summers. On 76244 tract homes the newer slabs are still settling, and a window that closed fine two years ago can bind in the frame.
ES Windows Service in Keller: What Local Conditions Mean for Your Equipment
Keller’s two housing eras split the ES Windows work in half. The 1980s-90s brick homes in 76248 around Keller Town Center are usually on their original windows or a first replacement from twenty-some years back, and those need full-unit swaps because the frame has already moved and the glazing package is past its life. The 2000s-2010s 76244 tract builds along the Alliance corridor are a different job entirely. Those homes are still on factory ES units, and a failed IGU or a worn balance can often be repaired without touching the frame. Same city, same brand, opposite answers.
That split is why we ask your ZIP before we ask anything else. A homeowner in 76248 with a cloudy pane is usually looking at a replacement. A homeowner in 76244 with the same symptom is often looking at a glass swap. The price difference is real, and nobody should pay for the bigger job if the smaller one is honest.
ES Windows Models & Products We Service in Keller
We work on the ES 2000 Series single-hung vinyl replacement window, the 4000 Series double-hung and slider units, the E1 and E3 Series vinyl single-hung new-construction windows, and ES custom fixed and picture window frames with Low-E insulated glass.
Parts come from ES OEM sources wherever the profile is still in production: sashes, balances, tilt latches, and weatherstrip. We match IGU glazing packages to the original spec so the new glass performs like the old glass was supposed to. Aftermarket is fine for wear parts. It is not fine for structural frame or glass replacement. We don’t claim any local parts stock: every part is ordered to the job after we’ve confirmed the model and measured the opening. That takes a few days and it’s worth the wait.
See the difference
Before
After
Before
After
Before
AfterES Windows Service Pricing in Keller
Here’s what the work runs in Keller. These are the same ranges we quote across the area, so you can compare apples to apples before you call anyone.
| Service | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
| Small Bathroom Remodel | $5,000 – $12,000 |
What drives the cost: how many openings, whether it’s a full-unit swap or a glass-and-sash repair, the series and glazing package, and whether the rough opening needs flashing and sill pan rework. A free estimate includes measuring the openings, verifying whether the frame or just the sash has moved, and a written line-item scope. No surprise invoices. Call (888) 590-9867 for an exact quote – estimates are free.
Serving Keller, TX – Our Local Coverage Area
We serve Keller and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – ES Windows Construction in Keller
Yes, often. On a 76244 tract home with a factory ES frame that’s still plumb and square, a failed IGU can be swapped with a matching glazing package and the frame stays put. On a 76248 home from the 1980s or 90s, the frame has usually moved, and a glass swap just hides a bigger problem for a year or two. Call (888) 590-9867 and we’ll tell you which one you have before anyone quotes it.
Two reasons stack up. Vinyl sashes warp from heat gain on south and west elevations during 100°F-plus Keller summers, and the expansive clay soils under Keller shift between wet springs and dry summers, which can rack the frame slightly out of square. Together they make a sash drag that didn’t drag before. Call (888) 590-9867 to have the opening checked.
No. We are an independent ES Windows service provider, not manufacturer-affiliated, authorized, sponsored, or endorsed by ES Windows. We know the product line well and install and service it to manufacturer spec, but the brand does not back us and we don’t claim it does. Call (888) 590-9867 for a free estimate.
The age of the frame. In 76244, homes are still on factory ES units and the frame is often sound, so repair is on the table. In 76248, brick homes from the 1980s and 90s are typically on their original or first-replacement windows and need full-unit swaps with fresh flashing and sill pan detailing. Same brand, different job. Call (888) 590-9867 to find out which one you’re in.
Often yes, and it depends on the scope: a like-for-like glass swap is usually a different case than a full-unit replacement that changes the opening. We pull permits and get inspections signed on every eligible job, so you’re covered either way. Call (888) 590-9867 and we’ll walk through what your specific Keller address needs.
Service Areas Near Keller
We also work ES Windows in Arlington, Kennedale, Forest Hill, Richland Hills, Hurst, and Bedford, and we take the brand into Watauga and North Richland Hills. If you’re in one of those towns and the window is fogged, sticking, or leaking behind the brick, reach out and we’ll get it on the schedule. Same brand, same approach, just a different driveway.
For a closer look at how we handle the whole line, see our ES Windows service page, and for everything we do in this town, visit our Keller service area page.
Book Your ES Windows Service in Keller Today
If a Keller window won’t latch, a pane has gone hazy, or you’re not sure whether it’s a repair or a swap, call (888) 590-9867. We’ll measure the opening, tell you honestly what it needs, and give you a written line-item estimate with no surprise invoices. A live person answers the phone 24 hours a day, and the first visit is free.
Written by the team at Barrett & Sons Construction Arlington.