Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
GAF Bathroom Remodeling: The Arlington Owner’s Guide
A full GAF bathroom remodel in Arlington typically runs $9,000 to $28,000 installed, depending on the size of the room and how far you go with tile, fixtures, and waterproofing. GAF itself is a roofing and waterproofing manufacturer, not a bathroom fixture brand, so what you’re really buying when a contractor says “GAF bathroom remodeling” is the waterproofing system under the tile – the membrane, the underlayment, and the flashing detail that decides whether your shower survives ten Arlington summers or starts growing mold in three. If you’re reading this because a contractor used that phrase and you want to know what it means, or because a GAF system in your home has failed, we’ll walk through both.
Barrett & Sons Construction Arlington is an independent service provider and not affiliated with GAF. We install and repair GAF waterproofing systems because they’re good, not because anyone sent us.
Which GAF Systems This Applies To
GAF’s bathroom-relevant products fall into a few families, and knowing which one is in your house changes everything about how a repair gets priced. The common ones in Arlington homes are GAF waterproofing membranes and underlayments used beneath shower tile, plus GAF roofing and decking products when a bathroom addition or dormer ties into the roof.
The honest catch: GAF doesn’t make bathroom fixtures. There’s no “GAF vanity” or “GAF toilet” to match by model number. What you match is the waterproofing system. Look for the membrane label on the exposed substrate if you can see it, or ask your previous contractor for the product data sheet. If neither exists, the part gets identified by what’s installed, not by what’s printed on a box.
For fixtures, the brands you’ll actually be matching in an Arlington bathroom are KraftMaid for cabinetry, Cambria or Silestone for counters, and mainstream plumbing lines for the rough-in. On GAF waterproofing, an OEM membrane matters more than it does on a vanity – a $40 aftermarket membrane under a $12,000 tile job is the wrong place to save money.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your GAF Bathroom Remodeling Is Failing
- Grout that keeps re-cracking in the same line. That’s usually movement in the substrate, not bad grout. A GAF membrane installed without proper thinset coverage lets the tile flex, and the grout telegraphs it within a season.
- A soft or spongy spot at the shower curb or the outside corner. Curbs and corners are where GAF flashing details get skipped most often. By the time you feel softness, water has been getting behind the tile for months.
- Musty smell that doesn’t clear with the fan running. In Arlington’s humidity, a shower that stays damp after 30 minutes of fan time usually has a vapor path the membrane was supposed to block.
- Tile popping loose near the drain or on the floor. Loss of bond at the drain collar is a classic GAF membrane failure point. It’s rarely the tile; it’s what’s underneath.
- Staining or bubbling on the ceiling below the bathroom. This is the loud one. A ceiling stain under a second-floor bath means the pan or the wall membrane has already given up and needs to come out.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Bathroom remodel pricing in Arlington, installed:
| Scope | Installed Price |
|---|---|
| Full bathroom remodel (GAF waterproofing included) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement (pan and tile) | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What pushes you toward the top of the $9,000 to $28,000 range: tile size and pattern (a 12×24 large-format porcelain costs more in labor than a 4-inch ceramic), moving the drain or supply lines, and whether the subfloor is sound or needs sistering. The GAF membrane itself is a modest line item; the labor to install it correctly is not. Every GAF job we do carries a written change order before any scope moves, so the number you sign is the number you pay. Work is backed by the written 90-Day Done Right Promise.
DIY or Call Us?
What you can safely check: whether the shower pan holds water overnight, whether the grout lines show cracking in a pattern, and whether the ceiling below stays dry after a long shower. Grab a flashlight and look at the drain collar and the curb corners – those tell you a lot in two minutes.
What you shouldn’t attempt: tearing out a failed GAF membrane and rebuilding the pan. This is wet, structural work with a learning curve that most homeowners don’t clear on the first try, and the failure mode is hidden mold behind new tile. We’ve been to plenty of Arlington homes where a weekend DIY shower pan was redone twice before the homeowner called. It’s not a jab – it’s just the reality of a waterproofing system that only works if every layer is right.
If you want a straight read on whether the GAF system in your bathroom needs repair or full replacement, call (888) 590-9867. Estimates are free, the trip charge is waived inside the county, and a second opinion on any written estimate you already have is always free too.
FAQs
Properly installed, a GAF shower membrane should last 20 to 30 years. In Arlington’s climate – hot, humid, with summers that run well past 100 – the failure usually isn’t the membrane itself but the details: skipped flashing at curbs and corners, thin thinset coverage, or a pan that wasn’t sloped. Those installed wrong fail in 5 to 8 years. Call (888) 590-9867 for a free inspection if you’re past year six and unsure.
Sometimes. A small grout or tile failure at the drain collar can often be repaired without pulling the whole pan. A membrane that’s leaking into the ceiling below almost always means a full pan replacement, because the failure is under the tile and you can’t fix it from the surface. The only way to know which you’re facing is to open it up and look. Call (888) 590-9867 for a free estimate before you commit to either.
A tub-to-shower conversion typically runs 2 to 3 weeks. A full bathroom remodel runs 4 to 6 weeks, weather and inspection schedules permitting. The biggest variable is permitting – every eligible job we do has permits pulled and inspections signed, because the inspector is the person who catches the waterproofing mistakes before you live with them. That adds a few days, and it’s worth the few days.
We source GAF waterproofing components through manufacturer-approved supply channels, matched to the system currently installed in your home – not to whatever’s cheapest on a shelf. That means checking the product family before ordering, because a membrane from one GAF series isn’t always compatible with the flashing detail from another. We don’t carry parts on a truck; every job gets the correct part ordered for it. Call (888) 590-9867 to start a free estimate.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.