Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
GAF Driveway & Pavers: The Arlington Owner’s Guide
We install and match GAF driveway and paver components for Arlington homeowners, and a typical installed project here runs $7,000 – $18,000 for a full paver driveway, with smaller repairs landing in the low hundreds. We’re an independent contractor, not affiliated with GAF, but we’ve handled enough of their hardscape lines in Arlington to know exactly what fits and what fails. Most owners don’t find the problem until they pull into the driveway and see it: a joint that’s started washing out, a paver rocking underfoot, or a stain appearing where the base should be holding firm. That discovery is usually the start of a short, honest conversation about what’s actually happening under the surface.
Which GAF Models This Applies To
GAF’s hardscape pieces are spec’d by profile, thickness, and color run, not by a single model number stamped on the stone. That’s the first thing to understand, because a lot of homeowners search for a “part number” that doesn’t exist the way it does on a roof shingle or a window sash.
When we match a paver, we’re checking three things: the nominal thickness (most residential driveway pavers here sit in the 2 3/8-inch to 2 3/4-inch range, and mixing them is how you get a rocking edge within a season), the surface profile (smooth, textured, or tumbled, which has to run continuous along a visible driveway apron), and the color and finish batch, since GAF runs colors in lots and a later lot will read as a different shade in Texas sun. The label on the original delivery slip or the edge of a leftover paver is the fastest way to identify what you have. If that’s gone, we measure the joint spacing and thickness on site.
The OEM-versus-aftermarket question for GAF is real. An exact GAF match keeps your driveway looking like one run of stone. A quality aftermarket equivalent of the same thickness and finish can work for a small repair where the color won’t be scrutinized, and it often costs less. We’ll tell you which side of that line your job falls on instead of defaulting to the pricier answer.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your GAF Driveway & Pavers Is Failing
Here’s what a failing driveway surface actually tells you, and the cause underneath each one.
- Pavers rocking underfoot or a hollow sound when you walk them. That’s base failure, not a stone problem; the bedding sand has washed out or the sub-base wasn’t compacted right, and the pavers are now bridging a void.
- Joint sand washing out after rain. Arlington sits on expansive clay soil, and soil movement plus Texas gully-washers push the joint sand out faster than the bags at the hardware store can replace it.
- Efflorescence, that white chalky haze on the surface. It’s mineral salts migrating out of the concrete, common in our climate, and it signals moisture moving through the stone.
- Chipped, cracked, or spalled edges at the driveway apron. Vehicle weight over a thin or poorly set edge course is the usual culprit, especially where the driveway meets the street.
- Sunken or heaved sections after a hard freeze or a wet spring. That’s sub-base movement again, and the pattern of where it happens tells us whether we’re looking at a repair or a rebuild.
Replacement Cost & What’s Included
For Arlington, here are the installed ranges we work from, and what drives the number.
| Job | Installed range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Driveway replacement | $5,000 – $14,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
What moves the range: total square footage, how much base has to be removed and rebuilt, whether we’re matching an existing color lot, and edge restraints or drainage corrections. Every scope and allowance arrives in writing before work starts, and any change comes as a written change order first, so the number at the end matches the number you agreed to. The labor is on the same line-item quote as the material, no mystery markup. And the work carries the written 90-Day Done Right Promise: if something’s not right, Tom comes back and fixes it on one call.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely do a few things yourself. Walk the driveway and note which pavers rock, check a joint line for washed-out sand after a rain, and photograph the edges where the apron meets the street. That’s diagnosis, and it helps us quote faster.
Where DIY goes wrong is the rebuild. Pulling and resetting pavers without compacting the sub-base properly, or laying new stone over a failed bed, is how a small repair becomes a full replacement in two years. The heavy lifting and base work aren’t a weekend job for most homeowners, and doing it twice costs more than doing it once. No high-tension or electrical risk here, but the tool and labor reality is real. If you’re unsure what you’re looking at, call us at (888) 590-9867 and we’ll take a look.
FAQs
How long does a GAF paver driveway last in Arlington? A properly installed GAF paver driveway should hold 25 to 30 years in our climate, with the base work being the deciding factor more than the stone. Expansive clay and freeze-thaw cycles are the main wear drivers here, so joint sand maintenance matters. Call (888) 590-9867 for an honest read on yours.
Can a failing GAF driveway be repaired instead of replaced? Often yes. Isolated rocking pavers, washed-out joints, or one settled section can usually be lifted, re-bedded, and reset rather than torn out. We’ll tell you plainly when a repair will hold and when it’s throwing money at a base that’s already gone. Call (888) 590-9867 for a free second opinion.
How long does the swap take? A targeted paver repair is typically a one- to two-day job, while a full driveway replacement runs several days to a week depending on square footage, base conditions, and weather. We’ll give you a realistic schedule in writing, not a phone estimate that changes at the door.
How do you source the GAF part? We match by thickness, profile, and color lot from GAF’s hardscape line, and we check the batch against what’s already on your driveway so the repair blends. If an exact GAF match isn’t practical for a small area, we’ll show you a quality equivalent and let you choose. Call (888) 590-9867 and we’ll walk you through it.
Barrett & Sons Construction Arlington also installs KraftMaid, Cambria, and Silestone across our kitchen and bath work, so if the driveway conversation turns into a bigger project, you’re already in good hands.
Get Your Free Estimate
If your GAF driveway or paver surface in Arlington is telling you something’s wrong, the cheapest thing you can do is get it looked at before a small repair becomes a big one. Call (888) 590-9867 to schedule your free estimate. Our technicians have up to 28 years of experience, every eligible job gets permits pulled and inspections signed, and every price change comes to you in writing first. A live person answers, day or night.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.