Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
GAF Home Additions & ADU: The Arlington Owner’s Guide
We build and finish additions and ADUs in Arlington using GAF roof systems, and a completed addition runs $45,000 – $130,000 depending on size, foundation, and finish level. An ADU on the same property is a bigger number, and we’ll walk you through it honestly. If you’ve landed here because a roofer told you “the GAF shingles on your addition failed early” or you’re staring at a label on a bundle you can’t read, you’re in the right place. Barrett & Sons Construction is an independent builder and is not affiliated with GAF.
Owners usually find this out one of two ways. Either a post-storm inspection turns up granules in the gutter and lifted shingles on the addition roof, or a buyer’s inspector flags that the addition was roofed to a different standard than the rest of the house and asks for the manufacturer paperwork. In Arlington, the second one happens a lot, because a 1990s addition and a 2019 re-roof often don’t share a single product line.
Which GAF Models This Applies To
GAF’s residential lines that show up on Texas additions and ADUs split into a few families. Timberline HDZ and Timberline UHDZ are the laminated architectural shingles most local crews install, and they carry a Golden Pledge warranty only when a certified contractor installs a full system: shingles, underlayment, starter, ridge vent, and the right number of nails. For ADUs with low-slope sections, you’re looking at GAF Liberty or Ruby membrane, not shingles, and those two do not swap. If someone quotes you shingles on a 2:12 pitch, that’s your first red flag.
To identify what you actually have, climb down from the ladder and do this instead: find the bundle wrapper left in the attic or garage, or read the printed code on the shingle tab. GAF stamps a product code on every shingle. A roofer who won’t ask to see it isn’t matching parts, he’s guessing. On the OEM-vs-aftermarket question, GAF’s own accessories (Pro-Start starter, Seal-A-Ridge ridge cap) are matched to the shingle’s sealant line, and off-brand caps are where most premature ridge failures start. We match the system, not just the shingle.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your GAF Home Additions & ADU Is Failing
Five things we actually see on Arlington additions, and what’s behind each one:
- Granules in the gutter after a storm. Normal shedding happens early in a shingle’s life; heavy loss after 8-12 years means the mat is breaking down. In North Texas hail years, this shows up faster than the manufacturer’s rating suggests.
- Shingles lifted at the ridge or rake. Almost always a nailing or starter-strip problem, not the shingle. That’s an installation failure, and it’s why we document the deck and the fastener pattern before we cover anything.
- Dark streaks down the addition roof. That’s blue-green algae feeding on limestone filler, and it’s cosmetic. GAF’s StainGuard Plus line addresses it; a standard Timberline shingle does not.
- Water staining on the addition ceiling. The shingle is usually fine; the flashing where the addition ties into the main house is where it’s leaking. Tie-in flashing is the number one addition failure point in Arlington.
- Warranty paperwork you can’t find. If the previous owner didn’t register the shingles or used a non-certified installer, the manufacturer warranty is void. That’s a parts-and-paperwork problem, and we can tell you in one visit whether it’s worth pursuing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For an Arlington home addition, the full build runs $45,000 – $130,000. An ADU is its own budget, typically $90,000 – $220,000, and a garage conversion ranges $30,000 – $80,000. Those ranges cover foundation, framing, roofing, windows, and finishes. What drives the top of the range: slab vs. pier foundation, GAF system vs. a builder-grade roof, and how much finish work you want inside.
Roofing on the addition itself is where the GAF line matters. A full GAF system on a typical addition roof runs $8,000 – $20,000 installed, and that includes tear-off, deck inspection, underlayment, starter, ridge vent, and the shingles. Parts and labor are quoted separately on the invoice so you can see what you’re paying for. Every eligible job gets permits pulled and inspections signed, and every completed job carries our written 90-Day Done Right Promise.
DIY or Call Us?
You can safely check a lot yourself: read the bundle wrapper in the attic, photograph the shingle tab code, look for lifted edges from the ground with binoculars, and check the warranty packet. What you should not do is climb onto a wet or steep addition roof, pull a shingle to “see what’s under it,” or try to re-flash a tie-in yourself. Roof work is height work, and a fall off a two-story addition is not a repair, it’s an emergency room visit. Tie-in flashing done wrong is worse than flashing left alone, because it looks fixed and leaks for two more years.
Call (888) 590-9867 and we’ll look at the paperwork and the roof together and tell you straight whether you need a full tear-off or a targeted repair. Estimates are free, and there’s no trip charge inside the county.
FAQs
Twelve to twenty years is the honest range in North Texas, not the thirty-year label number. Hail, summer heat cycling, and attic ventilation all pull that down, and an addition with a poorly vented attic will hit the bottom of the range. Call (888) 590-9867 for an exact quote – estimates are free.
Sometimes, yes. A single lifted ridge cap or one bad tie-in flashing is a repair. Granule loss across the whole field, or shingles that crack when bent, means replacement. We’ll tell you which one you have before you spend a dollar. Call (888) 590-9867 for a free second opinion on any written estimate you’ve already gotten.
Most Arlington addition roofs are one to two days of work once material is on site and the permit is pulled. The permit and inspection schedule is what sets the real timeline. We schedule it in writing so you’re not guessing. Call (888) 590-9867 to get your dates.
We order GAF system components through GAF-authorized suppliers matched to the model number stamped on your existing shingles or specified on the new scope. We don’t stock parts or carry them on a truck, so nothing gets substituted off a shelf. If the exact match is discontinued, you’ll see the substitute and the price difference in writing before work starts. Call (888) 590-9867 for a free estimate.
When you’re ready, call (888) 590-9867 and we’ll come look at the addition, the paperwork, and the tie-in. You’ll get a written estimate with every line item and every allowance on paper. Ask about our standing offers while you’re on the phone: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and our permanent 10% Senior & Veteran discount. KraftMaid, Cambria, and Silestone are also on the menu if the addition includes a kitchen or bath.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.