A Barrett company - serving Arlington, TX

GAF Kitchen Remodeling in Arlington, TX

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

GAF Kitchen Remodeling: The Arlington Owner’s Guide

Quick answer: A GAF kitchen remodeling project in Arlington typically runs $14,000 – $45,000 installed, and how fast crews can get to it depends on scope, permits, and material lead times (planned remodels don’t happen same-day). Most Arlington owners we meet discovered the problem the same way: a soft spot under the sink they didn’t notice, cabinet doors that stopped closing flush, caulk that started peeling months after the last crew packed up, or a friend pointing out that the “GAF” label on the materials didn’t match the paperwork.

Call (888) 590-9867

That last one matters more than people expect. Homeowners in Arlington call us after a previous remodel used materials that didn’t hold up and nobody signed off on anything, so the owner was left holding a project with no written scope, no allowance detail, and no change orders. This page is for the owner who already knows the brand they want matched and wants the work priced honestly.

Key Takeaways

  • GAF kitchen remodeling in Arlington runs $14,000 – $45,000 depending on the cabinet line, countertop square footage, and appliance layout.
  • The part of the job that fails first in North Texas is almost always plumbing, moisture, or cabinet movement, not the finish.
  • Every job we run gets permits pulled and inspections signed – open, honest pricing or the work doesn’t start.
  • We’re an independent service provider, not affiliated with GAF. We install and work with the brand, we don’t represent it.

Which GAF Models This Applies To

GAF isn’t just roofing, and it’s not a single kitchen line either. When a homeowner asks us to match “the GAF kitchen product,” we start by figuring out what they actually have or want – the label, the spec sheet, and the installation documentation rather than a guess from a photo on a phone.

Kitchen projects in Arlington that come to us with GAF-related scope usually fall into three buckets: cabinets and storage, countertop surfaces, and the enclosure materials around the kitchen itself. GAF’s kitchen-facing lines don’t share one universal spec number; the model family, series, and finish code are printed on the cabinet box label, the inside of the cabinet door, and the paperwork you signed at purchase – or in the plans your designer drew. Not the box. The paperwork.

How to identify what you’re working with:

  • Cabinet base cabinets: check the model code on the door’s interior and match it against your original order slip.
  • Countertop materials: measure square footage and note the finish and edge profile; GAF kitchen counter surfaces don’t share one standard thickness.
  • Enclosure and wall materials: look for the installation label, not just the brand stamp, since finish codes across GAF’s kitchen lines vary.

OEM vs. equivalent for GAF: most of the time, the right answer is OEM – genuine GAF replacement components matched to your specific model and finish. Aftermarket equivalents are workable on some hardware items but refuse to match GAF’s finish codes exactly, so we default to OEM unless the price gap is real and the homeowner chooses.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your GAF Kitchen Remodeling Is Failing

These are the symptoms we hear about most from Arlington homeowners. Each one has a real cause, and none of them fix themselves.

  • Soft or spongy cabinet bases under the sink. Usually moisture from a slow leak or a failing seal around the sink cutout, and the cabinet material swells before any water shows on the outside.
  • Doors that won’t stay closed or sit flush. Often hinges or mounting points have worked loose after the cabinet boxes shifted; in older Arlington homes this can mean the floor is no longer level.
  • Caulk, sealant, or grout failing within a year. Usually the wrong product for the joint, or no moisture barrier behind the tile, which accelerates failure faster in our hot, humid summers.
  • Countertop seams pulling apart or feeling uneven. Often a sign of weak substrate or movement in the cabinet base, and it gets worse if it’s ignored.
  • Musty smell, peeling paint, or bubbling wall material near the kitchen. Almost always moisture behind the wall, and it’s the most expensive failure to catch late.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s how the numbers actually break down in Arlington right now. The range depends on cabinet line, countertop square footage, and whether the layout changes or stays in place.

Scope Typical Installed Range (Arlington)
Full kitchen remodel $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

What drives the range: cabinet line and finish, countertop material (we also work with Cambria and Silestone alongside GAF projects when a homeowner is mixing brands), square footage, plumbing or electrical relocation, and whether the wall or floor needs repair before the new work goes in.

What’s included in every price we quote: parts and labor shown separately, permits pulled on every eligible job, inspection signed off, and every price change delivered as a written change order before any work moves forward. No surprise invoice at the end. A written 90-Day Done Right Promise backs the finished job, and every job gets walked through with the homeowner before we call it done.

DIY or Call Us?

Some checking you can do yourself. Some you shouldn’t touch, and we’ll say that plainly.

Safe to check yourself: opening cabinet doors and inspecting hinges, looking for soft spots under the sink with a flashlight, checking caulk and grout lines, and looking for peeling paint or moisture stains on the walls.

Where DIY goes wrong: anything that touches plumbing or electrical runs behind the cabinets, and any cabinet relocation where you’d need to cut or reroute the plumbing or shut off a circuit. That’s where a flip-the-shutoff-and-pull-the-plumbing idea turns into a water damage claim. Cabinets, counters, and tile tied to a moisture barrier are also easy to get wrong without the right substrate and sealant, and the failure often doesn’t show up for months.

The honest split: check what you can see, and call (888) 590-9867 before anything gets disconnected or torn out. A free estimate costs you nothing, and we’d rather look at a soft spot than hear about water damage.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch