Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
GAF Roofing: The Arlington Owner’s Guide
GAF shingle roof systems are what we install most in Arlington, and a full replacement here typically runs $8,000 – $20,000 installed, with most single-story ranch homes landing in the $9,000 – $14,000 range. Single repairs, like a failed pipe boot or a lifted ridge cap, usually land between $400 and $1,800. We’re an independent contractor and not affiliated with GAF, but our technicians have up to 28 years of experience working with GAF products and other premium lines.
Most Arlington owners don’t discover a roofing problem on a bright, calm day. They find it after a spring hail event or a summer downpour, when a brown ring blooms on a ceiling in Dalworthington Gardens, or when a neighbor points at a shingle tab lying in the yard after a north wind. Sometimes it’s simpler: you’re up on a ladder clearing gutters and you notice a ridge cap peeled back or a pipe boot cracked wide open. GAF systems fail in predictable places, and knowing which part is the problem is half the battle.
Which GAF Models This Applies To
GAF makes several shingle lines, and the part you need depends entirely on which one is on your roof. The three most common in Arlington are Timberline HDZ (the heavy architectural shingle most homes get), Timberline UHDZ (a thicker, heavier version), and Timberline AS II (a three-tab shingle more often found on older roofs and outbuildings). The system also includes GAF accessory components: ridge cap shingles (TimberTex or Seal-A-Ridge), starter strip, underlayment (such as Tiger Paw or FeltBuster), and pipe boots and vents.
The fastest way to identify your shingle is to look at a shingle tab in good light. GAF architectural shingles are roughly 12 by 36 inches with a distinct laminated profile; three-tab shingles are thinner and flat. Your attic may also hold a bundle wrapper or a manufacturer label near the decking. Compatibility gotcha: GAF has specific installation and product requirements for its Golden Pledge and Silver Pledge warranties, and mixing shingle lines or using non-GAF accessories can void the coverage. If your home is covered by a GAF warranty, matching the correct product line matters. On the OEM-versus-aftermarket question, we source GAF-branded components when the warranty requires it and quality aftermarket equivalents for straightforward repairs, always stating which we’re using.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your GAF Roofing Is Failing
Here’s what usually shows up, and what each symptom tells you:
- Granules collecting in gutters and at downspout outlets. Granule loss is normal wear, but heavy shedding on a roof under 15 years old points to hail damage or a manufacturing defect. In Arlington’s hail corridor, this is the most common reason a GAF roof gets inspected early.
- Cracked or split pipe boots. The rubber collar around plumbing vents dries out and cracks in Texas heat, usually within 10 to 15 years. This is the single most common leak source we find on GAF roofs in Arlington.
- Lifted or missing ridge cap shingles. North and west-facing ridges take the brunt of spring wind. A curled or missing cap lets water into the ridge vent and into the attic below.
- Ceiling stains or attic moisture. A brown ring on the ceiling or damp decking in the attic usually means a flashing or boot failure. Catch it early and it’s a repair; let it go and you’re replacing decking.
- Shingle tabs that look wavy or “zipper” up the roof. This can indicate poor ventilation or deck movement. Texas heat accelerates the aging of a poorly vented roof deck.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing in Arlington depends on square footage, pitch, the number of penetrations, and whether decking needs repair. Here’s the honest range:
- Full roof replacement: $8,000 – $20,000
- Roof repair (boot, flashing, small section): $400 – $1,800
- Ridge cap or starter strip repair: usually within the repair range above
What drives the number: the shingle line you choose, roof complexity (valleys, dormers, chimneys), and whether we find soft decking once the old material is off. We pull the permit and sign the inspection on every eligible job. Every scope, every allowance, and every price change arrives in a written change order before work happens, because an allowance that isn’t on paper is a surprise waiting for a date. Every completed job carries our written 90-Day Done Right Promise.
DIY or Call Us?
There are things you can safely check yourself. Walk the perimeter after a storm and look for shingle tabs in the yard. From the ground with binoculars, look at the ridge line and the pipe boots. Check the gutters for granule buildup. Those checks tell you whether a problem exists.
What we don’t recommend is climbing onto the roof to patch a boot, replace a ridge cap, or tuck flashing. Roofing is steep-slope work, and a fall from a single-story roof can put you in the hospital. Wet shingles, Texas heat, and a bad ladder angle are a dangerous combination. A trained professional with the right fall protection should do the actual repair. If you’ve spotted something, call us at (888) 590-9867 and we’ll take a look.
FAQs
How long does a GAF roof last in Arlington?
Most GAF architectural shingle roofs last 20 to 25 years in North Texas, though hail, attic heat, and poor ventilation can shorten that. The shingle itself is rated for decades, but the accessories (boots, flashing, ridge caps) often fail first, which is why we inspect the whole system, not just the shingles. Call (888) 590-9867 for a free roof inspection.
Can a failing GAF roof be repaired instead of replaced?
Often, yes. A cracked pipe boot, a lifted ridge cap, or a small flashing failure is usually a repair in the $400 – $1,800 range. A full replacement makes sense when granule loss is widespread, the roof is over 20 years old, or storm damage covers multiple slopes. We’ll tell you which you actually need.
How long does a roof repair or replacement take?
Most single repairs are done in a few hours. A full replacement on a typical Arlington home usually takes one to two days, weather permitting. We schedule in advance and pull permits before we start.
How do you source GAF parts?
We don’t keep parts on a truck or in a warehouse. We order the specific GAF shingle line and components your roof requires from suppliers, matching the product line to protect your warranty. For straightforward repairs we may use quality aftermarket equivalents and always tell you which we’re using. Call (888) 590-9867 for a free estimate.
We also install and service KraftMaid and Cambria products and Silestone countertops when your project runs beyond the roof. Our technicians have up to 28 years of experience, every eligible job gets its permits pulled and inspected, and Barrett & Sons has been owner-operated since 1998, with Tom Barrett and his sons on-site most days. Ask anyone on your street, or look up the license number yourself. Call us at (888) 590-9867 for a free estimate.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.