A Barrett company - serving Arlington, TX

IKO Bathroom Remodeling in Arlington, TX

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

IKO Bathroom Remodeling: The Arlington Owner’s Guide

IKO is a roofing and waterproofing manufacturer, not a bathroom-fixture brand, so there is no “IKO bathroom remodel part” to swap out the way you would replace a shower cartridge. What we do in Arlington is build and remodel bathrooms using IKO waterproofing and underlayment systems where they belong – under tile floors, behind shower walls, and on the roof above the room – alongside KraftMaid vanities, Cambria or Silestone tops, and tile set to manufacturer spec. A full bathroom remodel in Arlington runs $9,000 – $28,000 installed, and a small bathroom runs $5,000 – $12,000.

Call (888) 590-9867

Owners usually call us after the symptom shows up, not the product name. A soft spot at the shower curb. Grout that keeps cracking no matter how many times it gets patched. A ceiling stain in the room below that smells faintly of the attic. Sometimes it starts with a roofer who mentioned IKO underlayment by name and a homeowner who wants to know whether the bathroom above it was built to hold up. We walk it, look at what’s actually there, and put the scope in writing before anyone swings a hammer.

Key Takeaways

  • IKO makes waterproofing and roofing membranes, not tubs, toilets or vanities – a “IKO bathroom remodel” means the waterproofing layer under and around your finishes.
  • Arlington bathroom remodels run $9,000 – $28,000 installed; small bathrooms $5,000 – $12,000.
  • Most failures we see trace back to a missing or improperly lapped waterproofing layer, not the tile or the fixture.
  • Permits get pulled and inspections signed on every eligible job, and every price change arrives as a written change order before work moves.

Which IKO Systems This Applies To

IKO’s waterproofing line includes sheet membranes, liquid-applied coatings, and underlayments that show up in wet areas, and their roofing lines (Armourglass, Cambridge, Dynasty) show up on the roof over the bathroom. The compatibility question is rarely “which IKO product,” it’s “which system was specified and is it still available.” Product lines get renamed, discontinued, or reformulated, and a membrane that was standard ten years ago may not match what’s on the shelf now.

Here’s how to identify what you have. Pull the original permit card if it’s still in the panel – Arlington keeps records, and the permit usually names the waterproofing system. Look for a printed label or a stamped roll end on any leftover material in the garage. If neither exists, the fallback is a moisture reading and a look at the substrate: cement board, DensShield, or a bonded membrane tells us the era and the likely system. From there we decide between matching the existing IKO product where it’s still current, or replacing the whole wet-area assembly with a system that’s fully available. Mixing an old membrane with a new one at a seam is where leaks happen, so we don’t recommend it unless the transition can be done to spec.

On the OEM-versus-aftermarket question: IKO’s own membranes are the reference standard, and quality aftermarket equivalents exist (Schluter Kerdi, NobleSeal, and liquid membranes from Laticrete and Mapei) that perform comparably when installed correctly. The failure point in Arlington is almost never the brand – it’s the lap, the corner, or the drain flange. We’ll spec what fits your job and put the product name on the estimate so you can look it up.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your IKO Bathroom Remodeling Is Failing

Waterproofing doesn’t announce itself. It fails quietly and shows up somewhere else. These are the symptoms we find most often in Arlington bathrooms, and what each one usually means.

  • Soft or spongy floor near the shower or tub. Water has been getting past the floor membrane for a while and the subfloor is saturated. By the time it feels soft, the plywood or OSB underneath is usually compromised and needs replacement, not drying out.
  • Grout cracks that keep coming back after repointing. Cracked grout isn’t always cosmetic. If it returns in the same line within months, the substrate under the tile is moving or wet, and the waterproofing layer behind it has likely been breached.
  • Ceiling stain or musty smell in the room below. A stain under the bathroom usually points to a failed shower pan, a drain flange that wasn’t sealed to the membrane, or a supply line. In Arlington’s clay soils, foundation movement adds a second cause: small shifts open seams that were watertight when built.
  • Tile popping loose or hollow-sounding when tapped. Adhesive failure behind tile means moisture has reached the bond layer. Hollow tiles near a curb or drain are the ones to check first.
  • Peeling paint or bubbling drywall on the shower-side wall. Moisture is migrating through the wall assembly, not just condensing on the surface. This is the one that often traces back to a missing vapor barrier or a membrane that was never run high enough.

Replacement Cost & What’s Included

Arlington bathroom remodel pricing depends on how much of the wet area gets rebuilt, not on the brand of membrane. Here’s what we see in this market:

Scope Installed Range (Arlington)
Full bathroom remodel $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement $3,000 – $8,500
Vanity installation $800 – $3,000

What drives the range: whether the subfloor needs replacement, how much tile comes out, whether the drain and valve move, and whether a permit is required (it usually is for a full remodel in Arlington). Our estimates are line-item, with the waterproofing system, tile, fixtures and allowances named on paper. If a change comes up mid-job, you get a written change order before the work proceeds – an allowance that isn’t on paper is a surprise waiting for a date. Every completed job is backed by the written 90-Day Done Right Promise.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Some of this you can check yourself. A moisture meter on the floor and wall, a look at the permit history through the city, and a visual check of the caulk line at the curb and drain are all safe and worth doing before you call anyone. What we don’t recommend is tearing into a shower pan or membrane on your own. Once you open the waterproofing layer, you own the repair, and a shower that’s been opened and reclosed incorrectly is worse than the one you started with. The drywall behind it, the subfloor, and the drain connection all have to be redone together, and if the substrate is wet, the clock on mold starts the day it’s exposed.

We do this work in Arlington regularly, and we’d rather tell you it’s a $400 caulk-and-seal fix than sell you a remodel you don’t need. Call (888) 590-9867 and we’ll walk you through what to check before anyone comes out. A live person answers, day or night.

FAQs

Get a Written Estimate on Your Arlington Bathroom

Barrett & Sons Construction Arlington is an independent remodeling contractor – we’re not affiliated with IKO, and we’ll tell you so up front. We’re owner-operated, we pull permits on every eligible job, and we put the scope, the materials and the allowances in writing before anything moves. Our technicians have up to 28 years of experience, and we also work with KraftMaid, Cambria and Silestone when the job calls for them. Call (888) 590-9867 to schedule your free estimate – no trip charge inside the county, and a free second opinion on any written estimate you already have.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch