Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Windows & Doors: The Arlington Owner’s Guide
IKO is one of the most widely specified window and door brands in North Texas, and the parts that fail most often are the ones you never see on a showroom floor: sash balances, weatherstrip gaskets, glazing beads, hinge hardware, and the sill and jamb seals that let in water and air. When an Arlington homeowner lands here, it’s usually because a window won’t stay up, a door drags, or a seal gave out after a storm. We install IKO-compatible windows and doors across Arlington, and the typical installed price runs $4,500 – $15,000 for window replacement, or $800 – $3,200 for a single window if it’s a one-off repair.
We’re Barrett & Sons Construction Arlington, and we’re an independent service provider. We are not affiliated with IKO. That matters for one reason: we can tell you honestly whether a part is worth replacing or whether the whole unit has aged out.
Which IKO Models This Applies To
IKO’s window and door lines cover vinyl, aluminum, and wood-clad units, and the part you need depends entirely on which series you have. The fastest way to identify yours is to look at the warranty label in the corner of the sash or the top edge of the door slab. It carries a model and series code. If the label is gone, we measure the glass, the sash height, and the frame depth. Those three numbers are what a supply house needs.
This is where IKO gets specific. Their sash balance hardware and weatherstrip profiles changed between production runs. A balance from a 2008-era IKO unit will fit the sash track, but the tension rating and mounting bracket often won’t match the 2015-and-later line. That’s the compatibility gotcha most owners hit when they order by photo online. A generic balance might physically slide in, but the sash will creep, drop, or feel stiff. Get the series code off the label before you buy anything.
On the OEM-versus-aftermarket question: OEM IKO parts guarantee an exact fit, but the lead time can stretch when a series is discontinued. Quality aftermarket balances and weatherstrip are fine for most repairs. Secondary, storm-facing parts or structural hardware are where we stay with OEM or a spec-equivalent. We don’t stock parts. We don’t carry parts on a truck. We source the right part to your model and install it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Windows & Doors Is Failing
- The sash won’t stay up. A sash that creeps down is a failed balance spring or a tension block that has lost its grip. That’s a hardware failure, not a glass problem.
- Condensation between the panes. Fogging inside a sealed unit means the insulated glass seal is gone. The window has lost its thermal value, and a reseal isn’t a real fix. Replacement glass or the whole unit is next.
- A door that drags or sticks. In Arlington, summer humidity swells a wood or composite door edge, and a worn threshold or sagging hinge lets it bind. That’s usually a hinge or threshold part, not a reason to replace the door.
- Drafts or water stains at the sill or jamb. A worn weatherstrip or failed corner seal lets air and water past the frame. Left alone, it rots the sill and jamb, and now you’re paying for more than a gasket.
- Glass that rattles or sealant that’s cracked. A broken glazing bead or cracked seal lets the glass move and water behind it. That reseal is small if it’s caught early, expensive if it isn’t.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what window and door work runs in Arlington, installed, with parts and labor broken out in the quote. We do a written line-item estimate so you see the part cost and the labor separately.
| Service | Installed Range |
|---|---|
| Single window part or repair | $800 – $3,200 |
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
The range depends on how many units, whether it’s a single repair or full replacement, glass type, and whether the frame is structurally sound. A window won’t stay up? That’s a balance and it’s the low end. Fogged double panes throughout the house? That’s glass replacement or full unit replacement, and it climbs toward the top.
Every eligible job includes permits pulled and inspections signed, and the work is covered by our written 90-Day Done Right Promise. If a part we install fails, one call brings us back.
DIY or Call Us?
You can safely check a few things yourself: run your hand along the weatherstrip for gaps, check the warranty label for the series code, look for condensation between panes, and see whether the sash moves evenly in its track. That’s all diagnostic work, and none of it is risky.
The reason most IKO window and door work goes wrong DIY is the balance tensioning and the frame itself. A window sash is heavy and under tension. Replacing a balance incorrectly can let a sash drop or the whole assembly come loose, and that’s a genuine safety concern, not a scarecrow. In our part of Texas, the heat and humidity beat up old seals fast, so a repair that looks fine in November can fail by August. We’d rather show you the right part and install it so it holds.
Call (888) 590-9867 for a free estimate or the free second opinion on any written estimate you already have.
FAQs
Sealed glass units and weatherstrip typically hold 10 – 20 years here, shortened by North Texas heat, UV, and heavy summer storms. Hardwood-clad units can last longer if the sill and jamb stay dry. Vinyl frames are the most heat-tolerant, but the seals and balances wear first.
Often, yes. A sash balance, weatherstrip, hinge, or glazing bead is a repair, and it’s the cheap fix at $800 – $3,200. If the glass seal has failed or the frame has rotted, we’ll tell you honestly that repair isn’t the right move. Call (888) 590-9867 and we’ll walk you through which one you’ve got.
A single window part repair is usually a short visit, and a window replacement is a day or two depending on how many units. A patio or entry door install can run longer if the frame needs work. We’ll put the timeline in writing before we start.
We read the series code off your warranty label and order the exact balance, weatherstrip, or glass to your model. We don’t stock parts and we don’t carry parts on a truck. We source the right one and install it, so a discontinued series gets handled by measuring the glass and sash instead of guessing from a photo.
If your IKO window or door has a failed part and you’re tired of the guesswork, Barrett & Sons Construction Arlington is ready to look at it. Call (888) 590-9867 for a free estimate and get a written, line-item quote with the part and the labor shown separately. We’re your neighbors in Arlington, and we stand behind the work.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.