A Barrett company - serving Arlington, TX

James Hardie Fence Installation in Arlington, TX

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

James Hardie Fence Installation: The Arlington Owner’s Guide

James Hardie fiber cement fence panel installation in Arlington typically runs $3,500 to $9,000 installed, depending on linear footage, panel style, and gate count. We install Hardie-compatible fence systems across Arlington and the surrounding towns, and phone calls are answered by a live person around the clock. Most owners find they need this work the same way they find a leak: one panel starts looking chalky or a post shifts after a storm, and suddenly the whole run is suspect.

Call (888) 590-9867

What usually brings people to this page is a panel that won’t hold paint, a board that’s cracked at a nail line, or a gate that’s sagging so hard it scrapes the driveway. In Arlington, the clay soil that swells after every decent rain is a big part of the story. Panels fail at the fasteners and posts long before the fiber cement itself gives out.

Key Takeaways

  • Installed James Hardie fence runs in Arlington: $3,500 to $9,000.
  • Fiber cement fails at fasteners, posts, and paint film – not the panel body.
  • Texas sun and clay soil drive faster wear than the product data sheet implies.
  • Every job gets a written scope and written change orders before any work moves.

Which James Hardie Fence Models This Applies To

James Hardie is best known for siding, and their fiber cement products get adapted to fence use more often than most homeowners realize. If you’re replacing panels on an existing fiber cement fence, the first job is identifying what you actually have. Look at the back of a panel or the top edge for a stamp or printed code. HardiePanel vertical siding, HardiePlank lap siding repurposed for fence faces, and Hardie backer products all show up in fence assemblies, and each has different thickness and fastener requirements.

Measure thickness before you order anything. Fiber cement fence panels commonly run between 5/16 inch and 7/16 inch, and a panel spec’d for one thickness won’t seat correctly against rails cut for another. That’s the compatibility gotcha that trips up most Arlington owners buying online: the panel matches the color and texture but not the gauge, and the run never sits flat again.

On the OEM versus aftermarket question, James Hardie fiber cement is genuinely good material, and for the panel body itself we recommend sticking with the real product line. For posts, rails, caps, and fasteners, a quality aftermarket equivalent from a brand you can look up is often the smarter call and easier to source. We carry premium-brand depth across every trade we touch, from KraftMaid and Cambria indoors to GAF and CertainTeed on roofs, so we’re picky about what goes into your fence line too. We’re an independent contractor and not affiliated with James Hardie.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your James Hardie Fence Installation Is Failing

  • Paint peeling or chalking within a few years. Fiber cement needs a quality paint film to shed water, and in Arlington’s sun the factory finish breaks down faster than most owners expect. Once the film fails, moisture gets into the board face.
  • Cracks at the nail or screw line. This is almost always an over-driven fastener or a missing pilot hole. The panel was installed too tight, and thermal movement cracked it at the weakest point.
  • Sagging gate or a gate that won’t latch. The hinge post has shifted. Clay soil and a post set too shallow means the whole gate frame leans a little more each season.
  • Leaning or wobbly panels after heavy rain. Post depth and footing are the culprit. A post that wasn’t set below the frost-active zone or into stable soil will walk out of plumb in Arlington’s shrink-swell clay.
  • Rust streaks or loose fasteners. Non-galvanized or wrong-length fasteners corrode and back out. You’ll see it first on the south and west-facing runs where the sun hits hardest.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Arlington, expect a full James Hardie fence installation to land between $3,500 and $9,000. Where you fall in that range depends on linear footage, panel style, post depth and footing, the number of gates, and how much old fence has to come out first.

Line item Typical range
Panels and posts (materials) $1,800 – $4,800
Labor and setting posts $1,200 – $3,200
Gates and hardware $400 – $1,200
Old fence removal and haul-off $250 – $800

Your quote is line-itemed: materials, labor, gates, and disposal each on their own row. If the scope changes mid-job – say you add a gate or the old posts come out harder than expected – you get a written change order before any work moves. The finished job is backed by our written 90-Day Done Right Promise.

DIY or Call Us?

Some of this you can safely check yourself. Walk the line, push on each post to see if it moves, look for cracks at fastener lines, and note any panels that stay damp after rain. That tells you whether you’re looking at a paint problem, a fastener problem, or a footing problem.

Where DIY goes wrong is the post and footing work. A fence is only as good as what’s underground, and getting post depth and footing right in Arlington’s clay is the whole ballgame. Digging and setting posts on a run this heavy without the right equipment is slow, hard work, and a fence that leans in two years means starting over.

If you’re weighing a replacement, call (888) 590-9867 for a free estimate. We’ll give you a written scope and a second opinion on any other bid you’ve got.

FAQs

How long does a James Hardie fence last in Arlington? A properly installed fiber cement fence should hold up 20 to 30 years, but the real driver is the paint film and the posts. In Arlington’s heat and clay, plan to repaint every 5 to 8 years and expect post and footing work to be the first thing that needs attention. Call (888) 590-9867 for a free estimate on your specific run.

Can I repair failing panels instead of replacing the whole fence? Often yes. If the posts are solid and only one or two panels have cracked at the fasteners, a targeted repair makes sense. If several posts are leaning or the paint film is failing across the whole run, replacement usually costs less over time. We’ll tell you honestly which one you’ve got.

How long does the swap take? A typical residential run in Arlington takes 2 to 4 days, including removal, setting posts, and hanging panels and gates. Larger lots or multi-gate jobs run longer. Your timeline gets written into the scope up front.

How do you source the part for my model? We identify your existing panel by its stamp, thickness, and texture, then match it to the right product line. We don’t stock parts and don’t carry them on a truck, so materials are ordered to your spec and confirmed before the crew shows up. Call (888) 590-9867 and we’ll walk through what you’ve got.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch