Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Driveway & Pavers: The Arlington Owner’s Guide
We install Jerith-compatible driveway and paver systems across Arlington, and most full replacements land between $7,000 and $18,000 installed, depending on square footage, base prep, and pattern. A single failed panel or section is a smaller repair, often done in one visit. Owners usually spot trouble the same way: a paver that rocks underfoot at the driveway apron, a joint that keeps washing out after every rain, or a hairline crack spreading from the corner of the walk.
Jerith makes residential ornamental fencing and gate systems; when a homeowner asks us about “Jerith driveway and pavers,” it’s almost always one of their paver edging, border, or gate-post systems where the driveway, walk, or fence line meets hardscape. The part fails quietly at first. Then a winter freeze in Arlington finishes the job.
Which Jerith Models This Applies To
Jerith’s residential line splits into ornamental aluminum and vinyl fence systems with matching gate and post hardware, and the paver edging and border components that anchor a driveway or walk edge to their post system. The part number is stamped or molded on the inside face of the rail, the post cap, or the underside of the edging profile. Pull the cap and read it. If the stamp is gone, measure the post outside diameter, the rail spacing, and the paver thickness at the edge; those three numbers usually narrow it to one series.
For most Arlington jobs, the OEM part is the right call when the post or rail is still original and you’re matching finish and color on a visible elevation. Aftermarket equivalents make sense when the part is buried, hidden under a cap, or behind a gate hinge, and the exact profile won’t show. They cost less and last about as long when the base is done right. We don’t stock Jerith parts and we don’t carry them on a truck – we source the correct part for your model from the manufacturer or an authorized supplier, then install it. One note: Barrett & Sons Construction Arlington is an independent service provider and is not affiliated with Jerith.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Driveway & Pavers Is Failing
- A paver that rocks or “gives” when you step on it. The bedding sand or base has shifted, usually from water running along the edge where the Jerith border no longer holds the field in place.
- Joints that wash out after every heavy rain. Arlington’s clay-heavy soil holds water against the edge; when the border profile lifts, sand and polymeric joint fill drain away with each storm.
- A hairline crack at the post or anchor. Frost heave and summer expansion cycle the anchor; the crack is the visible sign the fitting has lost its grip.
- A gate that drags or won’t latch. A sagging gate post almost always means the paver or post base has settled, not that the hinge is bad.
- Edging that sits proud of the pavers. The border profile has walked up out of the base. Left alone, it becomes a trip edge and a water trap.
In Arlington, we regularly see spring failures along driveway aprons on the north-facing side of a house, where freeze-thaw hits hardest and the sun doesn’t dry the joint out until late morning.
Replacement Cost & What’s Included
Here’s what Arlington homeowners actually pay, installed:
| Job | Installed range |
|---|---|
| Paver driveway installation (full) | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
The range is set by square footage, base depth and prep, pattern cut, and whether the existing base has to come out. A single-part repair – one border profile, one anchor, one gate fitting – is a fraction of these numbers and we’ll quote it line by line. Parts and labor are itemized separately on the estimate so you can see what the hardware costs and what the crew’s time costs. Every eligible job gets permits pulled and inspections signed, and the work is backed by the written 90-Day Done Right Promise. Any scope change arrives as a written change order before work happens.
DIY or Call Us?
You can safely pull a post cap, read a part stamp, measure the post diameter and rail spacing, and photograph the failing joint. That’s it. What goes wrong for a homeowner doing this themselves is the base: resetting a paver edge or post anchor into Arlington’s clay without proper excavation and compaction means the part walks out again within a season, and most of the “cheap” fixes we get called back to are exactly that. Also, the post base on a Jerith gate system holds real load – a gate that comes off its anchor is a genuine hazard, especially with kids or a dog in the yard.
Call us at (888) 590-9867 and we’ll look at the part, match it, and give you a written estimate. Our crews have up to 28 years of experience, and we answer the phone with a live person, not a mailbox.
See the difference
Before
After
Before
After
Before
AfterFAQs
Most Jerith aluminum and vinyl components should last 15 to 20 years in normal use, but the anchor setting is what fails first in North Texas – our clay soil and freeze-thaw cycles at the driveway edge wear out a base faster than the part itself. Expect the hardware to outlast the setting by several years.
Often, yes – a border profile that’s walked up can be reset, and a gate anchor can be re-set with fresh base material if the post is sound. If the part is cracked, bent, or the profile no longer holds the pavers, replacement is the better call. We’ll tell you which one you need, not the more expensive one.
A single part or fitting is usually a few hours. A full driveway section with base work runs one to two days depending on square footage and access. We’ll give you the timing in writing with the estimate.
We pull the model number off the post cap, the rail inside, or the edging profile, then order from the manufacturer or an authorized supplier. We don’t stock Jerith parts – we order the exact part your model calls for, which is why getting the stamp or a clear measurement matters so much.
Other Brands We Also Service
Along with Jerith driveway and paver systems, we handle KraftMaid, Cambria, and Silestone on the interior side – the same written-scope, permit-pulled approach on every job.
Other Parts and Brands We Service
If your Arlington job touches cabinetry or countertops as well as the driveway and pavers, we install KraftMaid, Cambria, and Silestone in kitchens and baths – the same standard of written estimates and change orders on the interior side of the house.
Get a Free Estimate on Your Jerith Part
Call (888) 590-9867 for a free estimate. We’ll match the part to your Jerith model, quote the hardware and the labor on separate lines, and tell you straight whether it needs a repair or a replacement. Barrett & Sons Construction Arlington – Tom Barrett publishes his name, address, and license number, and his sons run the crews. Every eligible job gets permits pulled and inspections signed, every price change is a written change order, and every job is backed by the 90-Day Done Right Promise. A live person answers the phone 24/7, and the 10% Senior & Veteran discount is permanent. Ask anyone on your street, or look up the license number yourself. We’re twenty minutes away.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.