Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in North Richland Hills, TX | Barrett & Sons Construction Arlington
We provide independent Jerith construction service across North Richland Hills, working on ornamental aluminum and vinyl fence lines, gates, and post footings rather than cedar or chain link. What makes our Jerith work here different is simple: this city’s expansive blackland clay, hail cycles, and 1970s rear-easement plats decide where a fence can go and how its posts hold, so layout gets checked against the plat before any post is set. We’re Barrett & Sons Construction Arlington, an independent provider with up to 28 years of technician experience on ornamental fence work. Call (888) 590-9867 for a free estimate.
Why North Richland Hills Residents Choose Us for Jerith Service
Jerith fence work rewards crews who know the product, not generalists who mostly hang cedar. Our technicians understand the bracket-and-post hardware, self-closing gate mechanisms, and powder-coat finishes across the Jerith lines because they work on them regularly, and we use OEM Jerith posts, brackets, caps, and gate hardware wherever we can so picket spacing and color-match stay consistent run to run.
North Richland Hills homeowners get a team that treats the fence as a structural system, not a carton of parts. We scope the job in writing, allowances in writing, change orders in writing, and every eligible job includes permits pulled and inspections signed. The permit inspector works for you, not for us. When a run is leaning because footings heaved, we reset posts with proper footings and re-plumb the section rather than selling a full replacement you don’t need.
You’ll reach a live person when you call, and the price on the estimate is the price on the invoice. That’s Jerith service the way it should run.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Jerith Construction Problems We Solve in North Richland Hills
- Powder-coat chalking and fade. South- and west-facing runs take the worst of North Texas UV and repeated hail exposure. When the finish chalks across several runs, replacement makes sense; when it’s a few scratched panels, a touch-up at the cut ends and scratches usually holds.
- Rack-and-weld fatigue. Sections racked to follow grade or plumb put stress on the weld points at pickets and rails. Hail and falling limbs pop those welds loose, and a section that was fine two seasons ago starts to bow. Re-welding and re-plumbing handles most of it.
- Post footings compromised in blackland clay. The wet/dry cycling North Richland Hills sits on heaves and tilts posts, which throws gate alignment and rail lines off. This is the single most common cause of a leaning Jerith run in 76180 and 76182.
- Gate sag and hinge wear. Self-closing and ornamental gate hardware wears under daily use, and wood-side or masonry attachment points loosen as the house settles. A gate that won’t latch is usually worn hardware, not a broken fence.
- Spalling and rust blooming at cut ends. Scratched powder coat lets moisture and clay soil into the aluminum, and rust blooms from the cut. Sealing and touching up those spots early stops it from spreading down the rail.
Jerith Service in North Richland Hills: What Local Conditions Mean for Your Equipment
Here’s the fact that shapes every Jerith layout in North Richland Hills: the older lots off the Davis Blvd and Rufe Snow Dr corridors, many platted in the 1970s, often carry rear drainage easements that restrict where fence lines, gates, and concrete footings can legally go. That’s not equally true in the newer subdivisions going up a few exits away, where platting is fresh and rear setbacks are generous. For a Jerith owner, it means the layout has to be checked against the recorded plat before a single post is set. An ornamental run that looks fine on paper can push a footing straight into an easement, and the fix is a dropped line or a repositioned gate, not a bigger hole. We pull the plat first, walk the rear line with you, and set posts only where the recorded easement allows. In a city that’s fully built out and being reworked house by house, that check is the difference between a clean inspection and a tear-out.
Jerith Models & Products We Service in North Richland Hills
We handle the residential aluminum lines, the 2-rail and 3-rail ornamental styles including the Manchester and Berkshire lines, along with the 6-foot tongue-and-groove vinyl privacy panels and the pool-code aluminum fence built for pool enclosures. Coordinated ornamental gates and arbor systems with self-closing hinges are part of the work too.
On parts, we use OEM Jerith posts, brackets, caps, and gate hardware wherever they’re available so the picket spacing and color-match stay consistent. When OEM is backordered on a gate hinge, quality aftermarket hardware is a fine stopgap. We source parts to the specific job; we don’t claim to stock Jerith locally.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in North Richland Hills
Fence pricing in North Richland Hills follows the run, the grade, and the easement. A flat, short run on a newer lot costs less than a long, racked run on a 1970s plat with a rear easement pushing posts inward. Here’s how our published ranges land:
| Service | Price Range |
|---|---|
| Aluminum Fence Installation | $4000 – $10000 |
| Vinyl Fence Installation | $3500 – $9000 |
| Paver Driveway Installation | $7000 – $18000 |
Every free estimate includes a plat check, a walk of the line, and a written scope with allowances spelled out. No surprise invoices at the end. Call (888) 590-9867 for an exact quote. Estimates are free.
Serving North Richland Hills, TX – Our Local Coverage Area
We serve North Richland Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in North Richland Hills
Yes, usually. A graded yard is best handled by stepping the panels along the slope in short level runs, which keeps the posts plumb and avoids the weld stress that full racking puts on pickets and rails. Racking is sometimes unavoidable on steeper grades, but a good installer steps wherever the grade permits. Call (888) 590-9867 to look at your slope.
Hail can ding the powder coat and occasionally pop a weld at a picket or rail, but a well-built Jerith aluminum run holds up far better than cedar to a North Texas storm. Vinyl panels can crack at impact points, and the repair is usually a single panel swap rather than a full run. Inspect after a big storm and call (888) 590-9867 if a section looks off.
They limit where fence lines, gates, and concrete footings can legally sit. On the older lots off Davis Blvd and Rufe Snow Dr, a rear drainage easement can force a fence line in a foot or more, which changes post placement and gate location. We check the recorded plat before we set a post. Call (888) 590-9867 and we’ll pull yours first.
Almost always worn gate hardware or a footing that has heaved, and in North Richland Hills the blackland clay makes the second cause common. The hinge wears, the post tilts a fraction, and the gate no longer lines up with the strike. Replacing the hardware and re-plumbing the post usually solves it. Call (888) 590-9867 for a look.
You can usually replace just the damaged panels. Isolated post resetting, re-welding, or a single panel swap is often the right call. Full replacement makes more sense when the powder coat is failing across multiple runs or racked sections can’t be re-plumbed. Call (888) 590-9867 for an honest read on which way makes sense.
Service Areas Near North Richland Hills
We also work Jerith fence and paver projects in Watauga and Hurst, plus Richland Hills, Bedford, and the Arlington side of the metroplex. If you’re in any of these, we can check your plat and quote the same way.
Book Your Jerith Service in North Richland Hills Today
Whether it’s a leaning ornamental run, a gate that won’t latch, or a new vinyl privacy line on a 1970s plat, we’re set up to help. Our North Richland Hills service area covers 76180 and 76182, and calls go to a live person. Call (888) 590-9867 for a free estimate, and we’ll pull the plat before we set a post.
Written by the team at Barrett & Sons Construction Arlington.