A Barrett company - serving Arlington, TX
K

Kohler Roofing in Arlington, TX

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Kohler Roofing in Arlington, TX

Kohler Roofing: The Arlington Owner’s Guide

Kohler doesn’t manufacture roofing. That’s the first thing to sort out, and it’s the thing most homeowners in Arlington discover only after an hour of searching. If you landed here looking for a Kohler-brand shingle, tile, or roof component, there isn’t one to find. What Kohler does make are the accessories that touch a roof: ventilation, skylights, and the small hardware that keeps a roof breathing properly. If that’s what’s failing on your home, we install Kohler-compatible roof components across Arlington and can usually get a crew out to look within the week.

Call (888) 590-9867

Roof repair in Arlington runs $400 to $1,800 for the work most homeowners actually need. A full roof replacement is $8,000 to $20,000. If a Kohler roof accessory is the problem, it’s usually on the low end of that.

Owners typically notice the failure in one of two ways. Either water shows up on a ceiling in a place it has no business being, or a vent, skylight, or edge detail starts letting daylight through where it shouldn’t. Both point to the same handful of causes, and neither is a job you want to sit on through a Texas summer.

Which Kohler Models This Applies To

Kohler’s roof-adjacent products live in a few clear buckets. Their ventilation line covers ridge vents and soffit vents in several standard lengths and widths. Their skylight line includes fixed and vented models with a set of frame dimensions that have to match your rough opening precisely. Then there’s the hardware layer: brackets, flashing kits, and fasteners that show up in the install instructions for their skylights and vents. Each of those has a specific part number stamped on the label, and that number is the only reliable way to get a match. Measure the rough opening and the frame width before you order anything.

The OEM-versus-aftermarket question matters most for the flashing kits and gaskets. Kohler’s own flashing is built to a specific profile that mates with their skylight housing, and a generic kit from a big box store won’t seal the same way. For fasteners and vents, a quality aftermarket equivalent holds up fine as long as the dimensions match. The compatibility gotcha: a Kohler skylight frame from one production run won’t always take the flashing kit from another, even when the model number looks the same on paper. Check the year code on the label before you order.

We’re an independent service provider, not affiliated with Kohler, so we’ll tell you plainly when a Kohler part is the right call and when a compatible equivalent saves you money.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Kohler Roofing Is Failing

  • Water staining on a ceiling near a skylight or vent. The seal around the frame has broken down, and water is finding the path of least resistance. In Arlington that usually shows up first after a hard spring storm.
  • Daylight visible around a skylight edge. The flashing has lifted or pulled away, which means the roof deck is exposed at the weakest point. Left alone through a summer, it becomes a leak.
  • Condensation on the inside of a skylight or around a vent. Poor attic ventilation is trapping moisture, and cool nights push it back onto the glass and frame.
  • Rattling or loose vent components in the wind. Fasteners have backed out or the vent housing has warped, which lets rain in sideways during a storm.
  • Cracked or chalky gaskets around any roof accessory. UV exposure in North Texas breaks rubber down, and once a gasket goes chalky it’s no longer sealing anything.

Any one of those is worth a look. Two together usually means the accessory needs replacing, not just resealing.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Work Typical Arlington Range
Roof repair (flashings, vents, small leaks) $400 – $1,800
Tile roof repair (cracked or shifted tiles) $600 – $2,500
Full roof replacement (if the deck is compromised) $8,000 – $20,000
Metal roof installation (upgrade path) $15,000 – $40,000

Where you land in that range depends on how much deck and flashing has to come up to get to sound material. We quote the part and the labor on one written line so you can see exactly what the Kohler-compatible component costs and what the install costs. No mystery allowances, no surprise line items at the end. Every eligible job is permitted and inspected, and every finished job carries our 90-Day Done Right Promise in writing.

DIY or Call Us?

You can check a few things without leaving the ground. Look for staining on ceilings and walls from inside. Walk the perimeter and look up at the roof edge for lifted flashing or gaps around vents. If you have attic access, check for daylight and condensation around the skylight or vent openings. That’s a checklist, not a repair.

The repair itself is where DIY goes wrong. Roof work is fall hazard first and water damage second, and a flashing kit that looks seated on a dry day can fail the first time it rains sideways. The return on doing it yourself is small; the downside is a deck repair. We’d rather you call and let a crew with fall protection handle the climb. Our crews have up to 28 years of experience, and a live person answers the phone around the clock.

Call (888) 590-9867 to schedule a free estimate. No trip charge inside the county, and a free second opinion on any written estimate you’ve already got.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch