A Barrett company - serving Arlington, TX

KraftMaid Bathroom Remodeling in Arlington, TX

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

KraftMaid Bathroom Remodeling: The Arlington Owner’s Guide

If you’re reading this, you likely have KraftMaid cabinetry or a KraftMaid vanity in an Arlington bathroom that’s failing. A full KraftMaid bathroom remodel in Arlington typically runs $9,000 to $28,000 installed, depending on whether you’re replacing the vanity alone or rebuilding the room around it, and we don’t promise same-day work on a remodel because nobody should. What you get instead is a written scope, a written change order if anything shifts, and a start date we hold to.

Call (888) 590-9867

Most owners don’t set out to remodel. They notice something small first. A vanity door in a hail-damaged Arlington house won’t stay shut. A drawer box in a 2006 KraftMaid vanity sags, then sticks, then the bottom drops out. A shaker-style door on a humid bathroom wall shows its face panel pulling away at the joint. KraftMaid outsold nearly every stock brand in North Texas from the mid-1990s through the 2000s, so there’s a real chance the cabinets in your Arlington bathroom came from a big-box order kit, and the parts inside that kit followed a specific spec sheet. This page is about matching that spec so the repair holds and the room still looks like it did on day one.

Key Takeaways

  • KraftMaid bathroom remodels in Arlington run $9,000 to $28,000 installed. A small bathroom remodel runs $5,000 to $12,000.
  • Vanity-only swaps run $800 to $3,000; walk-in showers $4,500 to $12,000.
  • Adjoining brands we also work with on these jobs: Cambria, Silestone, and Kohler.
  • KraftMaid-compatible parts are sourced to your model spec, not pulled from a parts bin.
  • We are an independent service provider and are not affiliated with KraftMaid.

Which KraftMaid Models This Applies To

KraftMaid has run a handful of cabinet lines over the years, and the ones we see in Arlington bathrooms most often are the traditional door styles and the standard vanity cabinet lines with a plywood or particleboard box and a specified door-overlay type. Whether your vanity came in as an Oakmont, a Middlesbury, or one of the current cabinet collections KraftMaid runs, the important detail is underneath the counter, not the door style. Two vanities that look identical can carry different hinge plates, different drawer-glide systems, and different toe-kick heights, and swapping one part for the other’s version will either not fit or will fail within a season.

The fastest way to know what you’re working with is the silver label inside the cabinet on the back wall or the inside of the door. It will list a model or series number. Take a photo of it before you call anyone. If the label is gone, we take three measurements instead: the exposed portion of the drawer glide, the cabinet depth from front frame to back panel, and the door-overlay amount from the cabinet edge to the door edge. Those three numbers plus a door photo get us most of the way to the right part.

Between OEM and aftermarket for KraftMaid specifically: OEM is the safest route for hinges and drawer glides that need to match a specific hinge plate or glide clip pattern. Aftermarket is fine for toe kicks, shelves, drawer boxes, and door bumpers, where the spec is standard and a quality replacement will fit. Where aftermarket goes wrong is when someone tries to force a universal glide into a KraftMaid glide clip slot. It’ll seat, and then the drawer face opens crooked and the clip walks out over a summer.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your KraftMaid Bathroom Remodeling Is Failing

These are the symptoms we hear about most, and what actually causes each one.

  • A vanity door that won’t stay shut. Usually a worn hinge cup or a hinge plate that’s pulling out of soft cabinet material. In the DFW humidity swing, particleboard at the screw line swells and re-shrinks, eventually losing thread; the door drags and misaligns over a few seasons.
  • A drawer that sticks in warm weather and glides fine in winter. That’s usually a guide-rail issue, not the drawer itself. The plastic rail has worn thin and the wood swells in July heat. We see this in Arlington garages-turned-mudrooms as often as bathrooms.
  • Face-frame or door-panel cracks at the joint. Common in painted KraftMaid doors in bathrooms without an exhaust fan. Nine years of shower humidity is enough to move a wood face panel enough to separate at the shaker joint.
  • A soft or spongy bottom in the vanity cabinet. That’s moisture from a slow under-sink leak or a sink rim that lost its caulk. Left alone, the cabinet floor fails, and no hinge or glide replacement will save it.
  • A vanity top that’s separated from the cabinet, or a wall joint opening at the backsplash. This is movement of the whole unit, not a cabinet part. The cabinet box has lost its anchors in the wall studs. Replace or re-anchor before touching a single door.

Replacement Cost & What’s Included

Here are the installed ranges we quote most in Arlington, and what drives the number in each case.

  • Bathroom vanity installation: $800 to $3,000. KraftMaid vanity cabinet replacement plus door-hinge or glide parts, caulking, and disposal of the old cabinet.
  • Bathroom remodel, full: $9,000 to $28,000. Vanity, shower or tub surround, tile, plumbing rough-in, and fixtures.
  • Small bathroom remodel: $5,000 to $12,000. Standard half-bath or powder room scope.
  • Walk-in shower installation: $4,500 to $12,000. Tile, waterproofing, pan, and fixture.
  • Tub-to-shower conversion: $3,500 to $10,000. Often paired with new KraftMaid vanity doors and drawer fronts so the bathroom matches.

What drives the range: the cabinet line, the door style, whether we replace doors and drawer fronts on the existing box or replace the whole vanity, the countertop material (Cambria and Silestone both add to the range), plumbing and tile, and whether the permit is needed. Linear feet of tile and shower area land the biggest jump. Every allowance gets written into the estimate before we start, every price change gets a written change order before a nail moves, and the finished work is covered by the written 90-Day Done Right Promise.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

There’s a real split here, and it’s worth being honest about it. An owner can safely do these things without help: photograph the label inside the cabinet, tighten a hinge that’s just a turn loose, replace door bumpers, swap a drawer glide if the clip hole pattern matches exactly, and pull the drawer out to inspect the bottom. If the guide slides out of its front bracket by hand and the new one fits the same bracket without force, that’s a two-screw job and there’s no harm in it.

Where DIY goes wrong, in my experience, is the moment a homeowner forces a part into place because it almost fits. A drawer glide that seats crooked will crack the cabinet side. A vanity screw that goes back into swollen particleboard won’t hold the second time. And if your bathroom needs a permit because plumbing is moving or a shower is changing size, that permit needs a licensed contractor attached to it, not a homeowner holding a drill. That’s the boundary. Call (888) 590-9867 and we’ll tell you the honest answer over the phone, including when it’s a job you can handle yourself.

FAQs

How long does a KraftMaid cabinet last in an Arlington bathroom?
A KraftMaid vanity box typically lasts 15 to 25 years in an Arlington bathroom, and the moving parts (hinges and drawer glides) usually fail 5 to 10 years ahead of the box. DFW humidity swings are the main reason: our summers pull moisture into the cabinet and our winters dry it out, and the wear items soak up that cycle faster than the frame does.

Can you repair my KraftMaid vanity, or do I need a full replacement?
Repair is almost always the right first answer if the cabinet box is sound and the failure is in a hinge, a glide, a door, or a drawer front. Full replacement makes more sense when the cabinet bottom is soft, the wall anchors have failed, or the whole bathroom is scheduled for remodel anyway. We’ll tell you which one you’re facing after looking at the label and the damage. Call (888) 590-9867 and we’ll give you a straight answer.

How long does a KraftMaid bathroom remodel take?
A vanity-only replacement takes most of a day. A full bathroom remodel in Arlington typically runs two to four weeks, depending on tile, plumbing, and inspection scheduling. We don’t promise you a same-day bathroom; we tell you a start date and we hold it.

How do you source the right KraftMaid part?
We start from the model number on the cabinet label, or from three measurements and a door photo if the label is gone, and we source from the spec sheet that matches your cabinet line. We don’t carry parts in a truck or hold stock somewhere; every part is ordered to your cabinet. If you want a second opinion on an estimate another contractor handed you, that’s free, and it’s worth asking for.

Talk to Barrett & Sons Construction Arlington

Barrett & Sons Construction Arlington is the contractor you call when you want a name attached to the work. Owner-operated, founded in 1998, backed by the written 90-Day Done Right Promise, and staffed by crew members who carry the Barrett & Sons name on every job. We’re an independent service provider and not affiliated with KraftMaid, but we install and repair KraftMaid cabinetry, Cambria and Silestone tops, and Kohler fixtures all over Arlington, and we pull permits and pass inspections on every job that needs them. Call (888) 590-9867 for a free estimate. Ask about our $40 Off Any Repair Over $200, our Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and the permanent 10% Senior & Veteran discount.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch