A Barrett company - serving Arlington, TX

KraftMaid Fence Installation in Arlington, TX

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

KraftMaid Fence Installation: The Arlington Owner’s Guide

Fence installation in Arlington typically runs $3,500 to $9,000 installed, and we handle KraftMaid-compatible materials at that price with a written line-item quote before any work starts. If your fence posts are leaning, panels are bowing, or gates are dragging after a Texas storm season, you’re likely looking at a replacement of the fence line tied to your KraftMaid outdoor setup. Most Arlington owners find out something’s wrong when a gate stops latching clean in July, or when a post starts pulling out of our clay-heavy soil after a wet spring. That’s when the phone calls begin. We answer them.

Call (888) 590-9867

Which KraftMaid Models This Applies To

KraftMaid makes cabinetry and outdoor living products, and their fence-adjacent lines pair most often with their outdoor kitchen and storage series. Fence installation on this page means the fence line that anchors your KraftMaid outdoor installation, not a replacement of KraftMaid cabinet parts. If you’ve got a KraftMaid outdoor cabinet run set against a privacy fence, the fence itself is usually what we’re replacing. How to identify exactly which KraftMaid series you’re working with: check the inside of a door for a label with a model or series code, or measure the cabinet depth. Most KraftMaid base cabinets run 24 inches deep and uppers run 12 inches. That measurement gives us the anchor points for the fence posts and gate hardware.

OEM parts matter less here than they do for interior cabinetry, because fence line materials are almost always regional. When you’re choosing between a KraftMaid-branded fence panel and a quality equivalent from a Texas supplier, the equivalent usually wins on price and availability without any loss of fit. We source both. We’re an independent service provider, not affiliated with KraftMaid, so our advice on that tradeoff is honest and unsponsored.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your KraftMaid Fence Installation Is Failing

  • Leaning posts after rain. North Texas clay soil shrinks and swells with the seasons, and a post set in an undersized hole will walk itself loose within two or three wet cycles. If you can rock the post by hand, the concrete footing has failed.
  • Bowing or sagging panels. Wood fence boards pick up moisture and warp, especially on the west-facing side that takes the afternoon sun. Bowing usually means either the panels were installed too tight or the rails have lost integrity.
  • Gates that drag or won’t latch. A gate that clears at 60 degrees and sticks at 95 is a classic sign the hinge posts have shifted. The gate itself is usually fine; the posts aren’t.
  • Rotten bases and insect damage. Termites and carpenter ants love wet wood, and a fence board sitting in soil with no gravel or barrier will rot from the bottom up. If you can push a screwdriver into the base of a board, that board is done.
  • Rust on metal hardware and fasteners. Cheap galvanized screws fail in our humidity. Loose or popping fasteners mean the wood around them has also started to give.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Fence installation in Arlington runs $3,500 to $9,000 installed. The range depends on fence length, material (vinyl, aluminum, wood, or composite), gate count, and soil conditions. A standard residential privacy fence on a typical Arlington lot sits near the middle of that range. A larger lot with multiple gates and a corner run pushes toward the top. Aluminum ornamental fencing runs $4,000 to $10,000; vinyl runs $3,500 to $9,000.

What’s included: materials, post hole digging, concrete footings, panel installation, gate hardware, and cleanup. Permits are pulled on jobs where Arlington requires them, and inspection happens before we call it done. Every price change is a written change order before work proceeds, and the 90-Day Done Right Promise covers the installation in writing. Free second opinion on any written estimate you’ve already got.

DIY or Call Us?

Here’s the honest split. You can safely check a fence yourself: walk the line, push on every post, open and close each gate, and look at the bases of boards for rot or softness. That ten-minute check tells you whether you have a repair or a replacement on your hands.

Where DIY goes wrong: post holes. North Texas requires footings below the frost line and set in concrete wide enough to hold in clay. Setting a post in a shallow hole, or skipping concrete, means the post walks out within a season or two. That’s a lot of digging to redo. Gate alignment is the other trap; one out-of-level hinge post and the gate drags forever. And if your fence anchors a KraftMaid outdoor cabinet run, cutting the fence line wrong can compromise the cabinet installation. Our technicians have up to 28 years of experience setting posts in Arlington soil. Call (888) 590-9867 for a free estimate.

FAQs

How long does a fence last in Arlington? A quality wood fence lasts 12 to 15 years here; vinyl lasts 20 to 25 and holds up to our sun better. Post rot and clay-soil movement are the two things that cut lifespan short.

Can the fence be repaired instead of replaced? Often, yes. A single leaning post or a failed gate can be repaired for well under the full replacement cost. If more than a third of the posts are loose or the panels are showing widespread rot, replacement is the better money. Call (888) 590-9867 for an honest look at which side you’re on.

How long does a full fence installation take? A 150-foot privacy fence in Arlington runs two to four days, depending on footage, gate count, and weather. Scheduling usually lands two to three weeks out in normal season.

How do you source the fence materials? We work with Texas suppliers for vinyl, aluminum, wood, and composite fence materials, and we order the panel style that matches your KraftMaid outdoor setup. You get the material spec in writing before we order, so there are no substitutions you didn’t agree to.

Also handling Cambria, Silestone, and Kohler for our Arlington neighbors. Call Barrett & Sons Construction Arlington at (888) 590-9867 for a free estimate.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch