A Barrett company - serving Arlington, TX

KraftMaid Windows & Doors in Arlington, TX

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

KraftMaid Windows & Doors: The Arlington Owner’s Guide

We install and repair KraftMaid windows and doors across Arlington, and most jobs land between $4,500 and $15,000 installed for window replacement, with impact window work running $8,000 to $25,000. A failed hinge, an off-track sash, or a door that won’t latch is usually a same-day repair, not a replacement. KraftMaid is owned by Masco, the same parent that makes cabinetry most owners call us about, and windows and doors share that DNA: solid joinery, tight tolerances, and parts that need the right match, not the closest thing on a shelf.

Call (888) 590-9867

Owners in Arlington usually discover the failure slowly. The sash drags in July. A hinge starts popping. The exterior door swells after a week of hard rain and won’t close without a shoulder. Then one afternoon the lock won’t catch, and it stops being a nuisance and becomes a real problem.

We are an independent service provider, not affiliated with KraftMaid. That’s the point: we can tell you what the part actually is, and what it should cost.

Key Takeaways

  • Most KraftMaid window and door failures in Arlington are hinge, sash, weatherstripping, or lock failures on otherwise sound units.
  • Installed window replacement runs $4,500 to $15,000; impact-rated windows run $8,000 to $25,000.
  • Repairs fit under our $40 Off Any Repair Over $200 standing offer.
  • Every price change is a written change order before anyone touches your home.

Which KraftMaid Models This Applies To

KraftMaid sells windows and doors through a dealer network, and the specs you need to match a part live in one of three places. First, look for a label on the window sash edge or on the door’s top hinge jamb, usually a small foil sticker or a printed stamp. Second, check the jamb itself: most KraftMaid doors are pre-hung in standard frame widths, and that frame dimension, not the door slab, is what you’ll need to match. Third, measure the slab thickness, not the opening. Most interior doors are 1-3/8 inch; most exterior doors are 1-3/4 inch. Getting that backwards is the single most common ordering mistake we see in Arlington.

Where KraftMaid differs from the big-box brands is tolerances. Their sash profiles and hinge patterns are tighter, meaning a generic replacement sash will often sit a fraction of an inch off, and that fraction is what causes draft and lock misalignment months later. For that reason we lean toward OEM parts where they’re available and a named aftermarket equivalent (like a Masco-compatible hinge set) where OEM is on backorder. We don’t stock parts. We order what matches your unit, we tell you before we order, and we show you the part number in writing. If you have a Cambria, Silestone, or Kohler fixture in the same room during a larger job, we can sequence the work so nothing gets damaged while we’re working the door.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your KraftMaid Windows & Doors Is Failing

Here’s what we actually see across Arlington homes. Each symptom has a specific cause, and knowing the cause is what keeps a $180 repair from becoming a $6,000 replacement.

  • The sash drags or sticks in the frame. Usually a failed balance shoe or a warped sash caused by Texas heat and humidity cycling. If you’re forcing it, the rollers are grinding the track, and that damage gets worse every week.
  • A popping or snapping sound when opening the door. That’s a worn hinge barrel, not a door issue. Left alone, the hinge pulls the screws out of the jamb, and you’re into a jamb repair.
  • Daylight visible around the closed door or window. Weatherstripping has collapsed or the strike plate is misaligned. In an Arlington summer this also means a cooling bill climbing without an obvious reason.
  • The lock won’t catch, or the deadbolt catches hard. Thermal expansion is binding the door against the frame, or the strike is off by 1/8 inch. A functional lock is not cosmetic; a door that won’t secure properly is a real safety problem.
  • Fogging between the panes on a double-pane window. The seal has failed and moisture is inside the glass unit. This can’t be cleaned out. The sealed glass unit needs replacing, not the whole window.

One thing to know about the DFW climate: the swing between 100°F summers and occasional hard freezes stresses window and door seals harder than most of the country. KraftMaid windows generally hold up well for eight to twelve years before weatherstripping and hinges start failing. If you’re past that window, aging parts are expected, not a sign you bought a bad product.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what our Arlington customers actually pay, installed, with parts and labor shown in the quote:

Job Installed Range
Window Replacement $4,500 – $15,000
Impact Window Installation $8,000 – $25,000
Hinge and hardware repair Quoted per job, $40 off any repair over $200
Weatherstripping and strike plate realignment Quoted per job, $40 off any repair over $200

What drives the range: number of windows, frame material, whether the opening has to be re-framed (older Arlington homes sometimes have out-of-square jambs), and impact rating. Full window replacement across a house sits at the high end; a single kitchen window sits at the low end. Permits are pulled and inspected on eligible work. Every price change is a written change order before work proceeds. If your quote changes, you’ll hear it from us before the first nail moves. If a second written estimate from another company is sitting on your counter, bring it in for a free second opinion.

DIY or Call Us?

Here’s the honest split. You can safely check things: look at the hinge barrel for rust, confirm daylight around a closed door, watch whether the sash runs smoothly in its track, and check whether the strike plate screw holes are wallowed out. If it’s any of those, call us and we’ll quote it in a day.

Where DIY goes wrong is real. Removing a pre-hung door or a window sash from its frame means releasing the frame itself. On a second-story window that’s a fall risk, and on any home that door or window is a load point that has to go back in square. We’ve fixed plenty of jobs where a homeowner got the hinge off cleanly and then couldn’t get the door to close again without binding. There’s also the matter of matching the part. A wrong-size hinge runs $12 and ruins a $300 jamb. Not worth it.

Call (888) 590-9867 and we’ll tell you on the phone whether it’s worth repairing or replacing. A live person answers around the clock, and our crews carry up to 28 years of experience. No trip charge inside the county, and the 10% Senior & Veteran discount applies to every job we take.

FAQs

How long should KraftMaid windows and doors last in Arlington?
A well-installed KraftMaid window typically lasts 15 to 25 years, with hinges, weatherstripping, and glass seals being the first parts to fail, often around the 8 to 12 year mark in North Texas heat. The frame and slab usually outlast the hardware. Call (888) 590-9867 for a free assessment.

Can my failing KraftMaid window or door be repaired instead of replaced?
Yes, in most cases, if the sash, frame, or slab is sound. A hinge set, weatherstripping, or strike plate swap can keep your unit running for years. Replacement is the right call when the sealed glass unit has fogged or the frame has rot. We’ll tell you which it is when we look at it. Estimates are free.

How long does a repair or swap take?
A hinge or hardware repair is a short afternoon visit. Weatherstripping and realignment is similar. A full window or door replacement is scheduled in advance, usually one to two windows per day depending on the opening. Call (888) 590-9867 and we’ll give you a realistic timeline with the quote.

How do you source the right part for my KraftMaid unit?
We match on the label, the frame dimension, the slab thickness, and the hinge pattern. We don’t stock parts, so we order specific to your unit, and the part number is on your written quote before we order. If the OEM is backordered, we’ll tell you and offer a named equivalent. Call (888) 590-9867 to start the match.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch