Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Hurst, TX | Barrett & Sons Construction Arlington
We provide independent KraftMaid cabinet service across Hurst, from small door and drawer fixes to full kitchen remodels. The one thing that makes our KraftMaid work here different is that we know what Hurst’s clay soil and 1960s-70s slab ranches do to these cabinets, and we fix the cause instead of just rehanging doors. We’re not affiliated with KraftMaid, but we’ve worked on hundreds of their cabinets in Mid-Cities homes. Call (888) 590-9867 to schedule a free estimate.
Why Hurst Residents Choose Us for KraftMaid Service
Hurst cabinets sit in a specific kind of house. Most of the kitchens we walk into are in single-story brick ranches built between the 1950s and 1970s, and many have had a foundation repair at some point. The cabinets were never re-shimmed after that work. That’s why a door can bind even when the floor reads level.
As an independent KraftMaid specialist, we know the full product history. That runs from the older oak Raised Panel lines still common in 1970s ranches to the current Summertime and Finesse series. Match, modify, or replace, we can do it without the guesswork a general handyman brings. We source OEM-compatible parts when they’re available to keep the factory finish and fit, and we use quality aftermarket soft-close hinges and glides in older boxes that are structurally sound. Our technicians have up to 28 years of experience. Every eligible job gets permits pulled and inspections signed.
We serve the 76053 and 76054 ZIP codes and know the Hurst service area well. Call (888) 590-9867.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Solve in Hurst
- Post-foundation racking and door binding. Hurst’s expansive Blackland clay moves under slab-on-grade ranches, and cabinets get out of square. Even after leveling, doors still bind and drawer fronts misalign if the boxes were never re-shimmed. This is the most common call we get in Hurst.
- Thermofoil peeling on Venecia cabinets. Heat and humidity in unvented North Texas attics and garages break down thermofoil and laminate finishes. Upper cabinets near range hoods peel and delaminate first. Hurst’s July and August heat speeds this up.
- Cracked oak raised-panel doors and face frames. Older KraftMaid oak dries out in our low-humidity winters and cracks at the stiles and rails. Homes that run the heat hard in January see it worst.
- Particleboard swelling at the toe kick. Slab moisture and slow leaks swell the box bottoms. Once a box swells, the fix is a box replacement, not a new door.
- Worn hinges and glides after 15-20 years. Full-overlay hinges and drawer glides wear out from daily use and wide temperature swings. Doors sag and drawers stick.
KraftMaid Service in Hurst: What Local Conditions Mean for Your Equipment
Here’s the thing that shapes almost every KraftMaid job in Hurst: most kitchens we see are in 1960s-70s ranches where a prior foundation repair was done but the cabinets were never re-shimmed or re-hung. The floor is level, but the doors and drawers still don’t close right. That hidden step, re-leveling and re-securing KraftMaid boxes after pier-and-beam or slab work, is what separates a lasting remodel from a cosmetic one here.
Hurst is a fully built-out inner-ring Mid-Cities suburb. Most lots in 76053 and 76054 were platted in the 1960s and 70s, and there’s essentially no greenfield left inside the city limits. So work here is remodel and addition, not new subdivision build. A homeowner in a 1968 Hurst ranch notices that KraftMaid cabinet doors in the kitchen no longer close flush and the drawers rub, years after a foundation leveling. The usual cause is that the slab was stabilized but the cabinet run was never re-shimmed or re-anchored, so the boxes are still out of square. A qualified local pro will pull the doors, re-level the base cabinets with composite shims, re-secure them to the slab and wall, replace worn hinges, and adjust or replace drawer glides, then re-hang doors so they align correctly.
KraftMaid Models & Products We Service in Hurst
We work on the KraftMaid lines that actually show up in Hurst homes. Summertime is all-plywood and full-overlay. Finesse is framed and full-overlay. Venecia is thermofoil, and it’s the one that peels. The older oak Raised Panel lines from the 1980s and 90s are still common in the ranches here.
On parts, we take it case by case. We source OEM KraftMaid doors, drawer fronts, and hardware when they’re available to preserve the factory finish and fit. In older boxes that are still solid, we use high-quality aftermarket soft-close hinges and glides. We don’t claim to keep local stock, so lead time depends on the part. If a box is swollen or the layout doesn’t work, we’ll tell you straight whether refacing or full replacement makes more sense for your Hurst home. Our KraftMaid service covers installation, refacing, kitchen design and layout, and small or partial kitchen remodels.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Hurst
KraftMaid work in Hurst runs from a few hundred dollars for a hinge and glide refresh to a full kitchen remodel. What drives the cost is box condition, how much re-shimming the cabinets need after foundation work, whether you’re refacing or replacing, and the cabinet line you pick. A free estimate includes a walk-through of the kitchen, a look at the boxes and toe kicks, and a written line-item quote. Every scope and allowance is in writing before work starts. No surprise invoices at the end.
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4000 – $13000 |
| Countertop Installation | $2000 – $6500 |
| Backsplash Installation | $800 – $2500 |
| Small Kitchen Remodel | $9000 – $20000 |
| Kitchen Island Installation | $3000 – $10000 |
Call (888) 590-9867 for an exact quote. Estimates are free.
Serving Hurst, TX – Our Local Coverage Area
We serve Hurst and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Hurst
Are you an authorized KraftMaid dealer? No. We’re an independent KraftMaid specialist, not affiliated with the manufacturer. We’ve worked on hundreds of their cabinets in Mid-Cities homes and know the lines and how they fail in this climate.
My KraftMaid cabinets are still level but the doors and drawers stick after foundation repair, what’s going on? The slab was stabilized but the cabinet boxes were never re-shimmed or re-anchored, so the run is still slightly out of square. We re-level the base cabinets, resecure them to the slab and wall, and adjust or replace the glides. Call (888) 590-9867 for a free look.
Can you match my 1990s KraftMaid oak raised-panel cabinets for an addition or island? Often, yes. We source OEM KraftMaid doors and drawer fronts when they’re available to match the factory finish and fit, and we can match the oak raised-panel look for islands and additions. Lead time depends on the part.
Do you recommend refacing or replacing KraftMaid cabinets in a Hurst ranch home? If the boxes are structurally sound, refacing preserves the cabinet and saves money. If a box is swollen at the toe kick or the layout doesn’t work, replacement makes more sense. We’ll tell you honestly which fits your Hurst home. Call (888) 590-9867 to talk it through.
My thermofoil KraftMaid doors are peeling near the range, can they be repaired? Sometimes a single door can be replaced, but thermofoil that’s peeling near the range usually means the finish is failing across the uppers. We’ll assess whether a swap or a full door replacement is the better call.
How does Hurst’s clay soil affect KraftMaid cabinet installation? Expansive clay moves under slab-on-grade ranches, and that movement racks cabinets over time. That’s why we re-level and re-secure every box during a remodel, so the cabinets hold square after the soil settles. Call (888) 590-9867 for an exact quote.
Service Areas Near Hurst
We cover Hurst and the surrounding Mid-Cities. That includes Bedford, Richland Hills, Arlington, Kennedale, and Forest Hill. If you’re in 76053 or 76054, you’re in our area.
Book Your KraftMaid Service in Hurst Today
Call (888) 590-9867 to schedule your free estimate. Every eligible job gets permits pulled and inspections signed, every price change is a written change order, and every completed job is backed by our 90-Day Done Right Promise. Call today.
Written by the team at Barrett & Sons Construction Arlington.