Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Kitchen Remodeling: The Arlington Owner’s Guide
Barrett & Sons Construction Arlington installs and replaces Mighty Buildings-compatible kitchen components for installed prices of $14,000 – $45,000. We are an independent service provider, not affiliated with Mighty Buildings, and we don’t stock parts or carry them on a truck; we source the correct replacement for your model and schedule the work. Most owners find out something is wrong the same way: a cabinet door stops latching square, a countertop seam opens up near the cooktop, or a drawer sends out a puff of particle dust every time it closes. That’s the moment the phone usually rings.
Which Mighty Buildings Models This Applies To
Mighty Buildings built kitchens on a factory module system, and the fit tolerances are tighter than a stick-built kitchen. Cabinet boxes, filler strips and appliance cutouts were cut in a controlled shop, which means a replacement piece has to match the module’s actual dimensions, not a nominal standard size. Before we quote anything, we confirm what you have by pulling the data plate inside a base cabinet or on the mechanical chase cover and cross-checking it against the module drawings. Photos with a tape measure in frame save a trip.
Here’s the gotcha that bites people: a 24-inch base cabinet from a lumberyard is not automatically the same 24 inches as a Mighty Buildings module bay. The box may be metric, or the filler may be built in, which throws off countertop overhang and door reveal once you swap a single unit. If your home is on a post-2021 module line, the drawer glide pattern can also differ from the pre-2021 pattern, so the slides aren’t interchangeable even when the cabinet looks identical. On OEM versus aftermarket: Mighty Buildings-branded doors and panels are the safe match for visible faces. For hinges, glides, and shelf hardware, a quality aftermarket equivalent (Blum, Grass, or a comparable series) is often better built than the original and costs less. We’ll tell you plainly which is which before you commit. We also handle KraftMaid, Cambria and Silestone when a kitchen goes past a single component into a full refresh.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mighty Buildings Kitchen Remodeling Is Failing
- Doors that rub or won’t sit flush. Usually a hinge plate that pulled loose from the factory panel, which is thinner than a standard cabinet face and won’t hold a wood screw once it strips.
- Drawers that jerk or derail. The glide is worn or the mounting screws have wallowed out the rail. On module cabinets the rail sits close to the edge, so a stripped hole means a new glide, not a bigger screw.
- Countertop seams opening near heat sources. Arlington summers push indoor humidity swings that work on the seam, and a factory seam that was tight in a climate-controlled shop can open up once it bakes through 15 to 20 summers.
- Water staining under the sink or at the toe kick. The factory panel is engineered wood, which swells and never comes back. Once you can feel softness, the box has to go.
- Squeaks or flexion underfoot at the cabinet base. The module has shifted slightly on its foundation. That’s not a cabinet problem and shouldn’t be quoted as one.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing in Arlington breaks down roughly like this:
| Item | Installed range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Full kitchen remodel | $14,000 – $45,000 |
Where you land on that range depends on how many module bays are affected, whether the counter has to come out to swap it, and what the door and panel match requires. We quote parts and labor on separate lines so you can see what you’re paying for the material versus the install. Every price change gets a written change order before work starts. The job is backed by our written 90-Day Done Right Promise. We pull every permit the scope requires and the inspector signs off.
DIY or Call Us?
You can safely check a few things yourself: photograph the data plate, measure the cabinet openings, and jot down any model numbers on the door or hinge. A hinge swap, a shelf pin, or a drawer glide is within reach for a confident homeowner.
Where it goes wrong: pulling a countertop or an island without knowing how the module is anchored, cutting into a cabinet run that has plumbing or wiring behind it, or trying to swap a base cabinet under an appliance cutout. Those are the calls that turn a $400 job into a $4,000 one, and no part of this work is worth risking a fire or a flood over. Call (888) 590-9867 and we’ll tell you straight whether it’s a one-hour visit or a real project.
FAQs
Expect 15 to 25 years for cabinet boxes and hinges, and 10 to 15 for drawer glides, if the module was installed and kept dry. In Arlington the humidity swings do the wear, so a kitchen near a west-facing wall tends to fail faster than the same kitchen under a covered porch.
Sometimes. Hinges and glides are usually a clean swap. A swollen cabinet box or an open countertop seam is not repairable and needs to come out. We’ll say so directly once we’ve looked.
A hinge or glide set is a one-visit job of about an hour. A single cabinet bay or an island is typically a half day. A full kitchen component replacement runs several days and depends on the countertop lead time. Call (888) 590-9867 for a firm timeline on your kitchen.
We start with the data plate and module drawings, match to the OEM or to a verified aftermarket equivalent, and confirm the dimensions before we order. We don’t carry parts on a truck, so we’ll tell you the lead time up front and put it in writing.
If your Mighty Buildings kitchen in Arlington is showing any of these signs, don’t wait for a small repair to get expensive. Call Barrett & Sons Construction Arlington at (888) 590-9867 for a free estimate. We’ll look at what you have, give you an honest number with parts and labor spelled out, and put any changes in writing before we touch a single cabinet.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.