A Barrett company - serving Arlington, TX

Moen Windows & Doors in Arlington, TX

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Moen Windows & Doors: The Arlington Owner’s Guide

If you’ve got a Moen window or patio door that’s fogged, dragging, or won’t latch right, a licensed crew in Arlington can install the correct replacement part for $450 to $1,400 per opening in most cases, with full window replacement at our standard $4,500 – $15,000 range for a whole-house job. We schedule inspections within days, not weeks. Call (888) 590-9867 and a live person answers.

Call (888) 590-9867

Most Arlington owners find out the hard way. A window in a 1990s subdivision off Green Oaks starts sweating between the panes after a July. The sliding patio door tracks grit up with Red River dust and starts binding. Then one hard freeze comes through and a seal gives out, or a lock won’t catch. That’s usually the moment the phone comes out. We’re an independent crew, not affiliated with Moen, and we match the part to your exact model before we order.

Which Moen Models This Applies To

Moen’s window and door lines sold through builders and home centers carry model codes stamped on the frame, not the sash. Look for a metal or sticker label inside the upper jamb or on the door’s hinge-side frame edge. That label gives you the series and the size callout, usually something like a rough-opening dimension in inches plus a glass package code. Copy that whole string down before you call anyone.

The compatibility gotcha: two Moen windows with the same width and height can use different sash balances and weatherstrip profiles depending on which series they came from, and those parts are not interchangeable. A balance cluster that fits a builder-grade unit won’t seat in a higher-tier series even when the numbers match. That’s why we ask for photos of the label and the failed part together.

OEM versus aftermarket: for glass seals and balances, a Moen-specific OEM piece is often the right call because the mounting geometry is proprietary. For weatherstripping, screws, rollers, and tilt-latch hardware, a quality aftermarket equivalent works fine and costs less. We tell you which side of that line your part falls on and quote both when it matters. We don’t stock parts and don’t carry them on a truck; we source exactly what your unit needs.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Moen Windows & Doors Is Failing

  • Condensation or haze between the panes. The sealed glass unit has lost its gas fill and the desiccant is spent. In Arlington’s swing from humid Gulf air to dry winter fronts, that seal works hard and shows its age first.
  • The sash drags or won’t stay up. A failed balance tube or worn pivot shoe is the cause. You’ll notice it most on the second-story windows that get the afternoon sun.
  • Sliding patio door binds or jumps the track. Grit-packed rollers or a bent track rail. Common on doors facing a backyard with a concrete patio and no overhang.
  • Drafts or a whistling edge. Worn weatherstrip, a failed sweep, or a frame that’s shifted. A dollar-bill test around the perimeter tells you where the leak concentrates.
  • The lock won’t latch or the handle is loose. A worn keeper, a stripped mortise, or a multi-point mechanism that’s out of alignment. Loose hardware also means the seal isn’t closing tight.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s the honest number range for Arlington, with parts and labor together:

Job Installed Range
Single window replacement (whole unit) $450 – $1,400
Whole-house window replacement $4,500 – $15,000
Impact-rated window installation $8,000 – $25,000
Glass seal / sealed-unit swap (per opening) Quoted per job
Hardware, balance, or roller replacement Quoted per job

The range moves with the size of the opening, glass package, and whether we’re swapping a sash or the full frame. We quote parts and labor as separate line items so you can see what the Moen piece costs versus the install. Every eligible job gets permits pulled and inspections signed, and every completed job carries our written 90-Day Done Right Promise. Any change in scope arrives as a written change order before the work moves.

DIY or Call Us?

You can safely check a few things yourself: test the lock, run a dollar bill around the frame to find drafts, clean the door track with a shop vac, and confirm the model label. Cleaning rollers and lubing a track with silicone spray is fair game. What you shouldn’t do is remove a sealed glass unit or pull a balance yourself. A failed sealed unit weighs more than it looks and the edges will cut you; a spring-loaded balance can release with real force if you don’t know the tension sequence. We handle those. Call (888) 590-9867 for a free estimate and we’ll tell you straight whether it’s a part swap or a whole-unit replacement.

FAQs

How long should Moen windows and doors last in Arlington? A sealed glass unit typically gives you 15 to 20 years before the seal fails. In Arlington’s heat and humidity cycle, expect the first seal or balance failure between years 12 and 18 on a builder-grade unit.

Can the part be repaired instead of replaced? Yes, in most cases. Hardware, balances, rollers, and weatherstrip are repairable and cheaper than a full swap. A fogged sealed unit usually needs replacement, not repair. Call (888) 590-9867 and we’ll quote both paths.

How long does the swap take? A hardware or balance replacement runs about an hour per opening. A sealed-unit or full window swap runs two to four hours depending on size and access. Estimates are free.

How do you source the Moen part? We match your model label to the correct OEM or quality aftermarket part and order it to the job. We don’t stock parts, so we confirm the lead time before we schedule. Call (888) 590-9867 for your free estimate.

We also work with KraftMaid, Cambria, and Silestone on other parts of your home. Look up our published license number before you sign anything with anyone.

Every price change is written before the work moves, every eligible job is permitted and inspected, and every completed job is backed by our 90-Day Done Right Promise. Call Barrett & Sons Construction Arlington at (888) 590-9867 for a free estimate, and we’ll put the scope in writing so there are no surprises.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch