A Barrett company - serving Arlington, TX
M

Mr-Glass Driveway & Pavers in Arlington, TX

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mr-Glass Driveway & Pavers: The Arlington Owner’s Guide

We install and repair driveway and paver systems that include Mr-Glass components for homeowners across Arlington, and most paver driveway projects run $7,000 to $18,000 installed, while driveway repair and re-lay work is quoted from a written scope. If you’ve got a settled, cracked, or lifted section that your Mr-Glass system was built around, that’s the part failure we get called about most. You usually notice it after a hard rain when water pools against the garage apron, or when a wheel drops into a depression that wasn’t there last spring. Arlington sits on expansive clay soils that swell and shrink through the summer, and that movement is what finds every weak joint first.

Call (888) 590-9867

Which Mr-Glass Models This Applies To

Mr-Glass driveway and paver edge restraints, caps, and transition pieces fit their specific paver series, and the series identifier is usually stamped on the underside of the edge cap or printed on the original project paperwork. Before you order anything, measure the actual piece: the paver course thickness, the restraint channel depth, and the cap width to the nearest sixteenth of an inch. Installers sometimes substitute a generic edge restraint during a fast build, so a piece that isn’t marked Mr-Glass could still be sitting in your Arlington driveway.

On the OEM-versus-aftermarket question, here’s what we tell homeowners. The OEM piece gives you an exact fit and the original color match, and it’s worth it when the cap is visible. For a buried edge restraint holding the paver course, a quality aftermarket equivalent in the same channel profile usually performs identically and costs less. Bring us a photo of the stamp and the measurement and we’ll tell you which way makes sense for your Mr-Glass system.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mr-Glass Driveway & Pavers Is Failing

  • Paver edges lifting or separating from the restraint. The restraint has lost its anchoring, usually because clay soil under Arlington driveways has shifted with the wet-dry cycle and pulled the stake loose.
  • Water pooling against the garage or in a low spot. A failed transition piece or settled paver course has broken the original drainage slope, and water now sits where it should run off.
  • Hairline cracks running across a cap or transition piece. West Texas sun cooks pavers and concrete caps through Arlington summers; a piece that flexes with clay movement underneath will crack at the thinnest point.
  • Weeds and grit pushing up between pavers at the edge. The edge restraint has separated from the field, opening a seam that poly sand and a proper re-set would normally close.
  • A wheel jolt or a visible dip when you pull in. Pavers have settled or a base course has washed out, and the restraint alone can’t hold a course that has lost its foundation.

Replacement Cost & What’s Included

For Arlington, expect these installed ranges: paver driveway installation runs $7,000 to $18,000, concrete driveway installation $4,500 to $12,000, and a full driveway replacement $5,000 to $14,000. Sealing a driveway after the repair runs $250 to $700. The range depends on square footage, base depth, restraint type, and how much existing paver course has to come up to reach the failed section.

Every quote is written, line item by line item, with parts and labor broken out separately so you can see exactly what a piece costs and what installation costs. Every price change arrives as a written change order before any work moves forward. The completed work is backed by our 90-Day Done Right Promise, written on the contract, and one call brings us back if anything isn’t right.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely check a few things yourself. Sweep out the seam, photograph any stamps or model numbers on the piece, run a level across the low spot, and measure the width and depth with a tape. That’s the information that makes the quote accurate.

Where it goes wrong is the re-lay and re-setting. Digging out a settled paver course to reset the base is heavy, dusty work that requires a proper compacted aggregate base, correct slope, and a restraint re-anchored into stable soil, not loose fill. When we install, permits are pulled where required and inspections are signed, so you know the base and drainage are right and not just patched over. Call (888) 590-9867 and we’ll come take a look, free estimate, no pressure.

FAQs

How long does a Mr-Glass driveway and paver system last in Arlington? A properly installed paver driveway with a good base typically lasts twenty to thirty years, and in Arlington heat the sun is kind to pavers but hard on the base and edge restraints. Plan on restraint repair or re-setting sometime in the second decade, and sealing every few years helps hold the joints together.

Can the damaged part be repaired instead of replaced? Often yes. If the restraint has lost its anchor but the pavers are sound, we can re-stake and reset the edge; if a cap or transition piece is cracked, that piece is replaced, not the whole driveway. The quote tells you which it is before we start.

How long does a driveway and paver repair take? A restraint repair or an edge re-set is usually a day, sometimes two if the base has to come up. A full re-lay is longer, and we’ll give you the schedule in writing before the crew starts. Call (888) 590-9867 for an exact time estimate on your job.

How do you source the right Mr-Glass part? We match by the measurement and the stamp, not just the model name, so we can find the right piece in the right profile even when the original paperwork is gone. Bring photos of the failed section and the stamp, and we’ll tell you what’s needed and what it will cost. Estimates are free.

Other Brands We Service

We also handle KraftMaid, Cambria, and Silestone across the trades we work, so if your home has those products, one call covers more than the driveway.

Talk to a Local Crew

If your Mr-Glass driveway and paver system has a failing section in Arlington, call Barrett & Sons Construction at (888) 590-9867 for a free estimate and a written scope. We’re an independent service provider, not affiliated with Mr-Glass, but we know their paver systems well. Our technicians have up to 28 years of experience, permits are pulled and inspections signed on every eligible job, and our work is backed by the 90-Day Done Right Promise.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch