Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Owens Corning Kitchen Remodeling: The Arlington Owner’s Guide
Owens Corning kitchen remodeling work in Arlington typically runs $14,000 – $45,000 installed, and small kitchen remodels land between $9,000 – $20,000. Most homeowners find this page after a specific failure: a ceiling stain under an upstairs bath, an Owens Corning shingle course that lets go at the transition where the kitchen addition ties into the main roof, or a cabinet run pulling away from a wall that never got proper substrate. Owens Corning covers roofing, insulation, and a licensed brand line of building materials, and kitchen projects in Arlington live or die on those adjacent systems. Insulation, moisture barriers, and the roof plane over a kitchen all fall under Owens Corning’s product umbrella. When one of them fails, the remodel usually starts with an investigation, not a demo day. Arlington sits in the middle of a hail alley, and that single fact shapes nearly every failure we find under an Owens Corning-branded kitchen.
Key Takeaways:
- Installed Owens Corning-compatible kitchen remodels in Arlington: $14,000 – $45,000; small kitchens $9,000 – $20,000.
- We’re an independent contractor, not affiliated with Owens Corning.
- Every eligible job gets permits pulled and inspections signed before we close out the job.
- 90-Day Done Right Promise on every contract: if something’s wrong, one call brings Tom back.
Which Owens Corning Models This Applies To
Owens Corning doesn’t make a “kitchen” the way KraftMaid makes a cabinet. What it makes is the envelope around your kitchen: Duration and Oakridge architectural shingles overhead, R-13 to R-21 fiberglass batts inside the walls, and FOAMULAR rigid board where the addition meets the main house. When an Arlington homeowner says their kitchen is failing, nine times out of ten the failure traces back to one of those Owens Corning system pieces.
Identification starts with the label. Duration and Duration Storm shingles are ink-stamped on the underside of a tab and molded into the shingle mat. Oakridge shows a different texture and a narrower warranty profile. On the insulation side, look for the foil or poly facing label on the batt; Owens Corning PINK fiberglass runs R-11, R-13, R-15, R-19, and R-21 in the widths used in Texas light-frame construction. FOAMULAR 150, 250, and 400 rigid board each carry a printed product code and a thickness measured in inches (1″, 1.5″, 2″). Match that code before you buy replacement material.
The OEM-versus-aftermarket decision for Owens Corning runs differently than it does for, say, a garage door spring. Shingles need match-by-profile, not match-by-tolerance, because a mismatched course over a finished kitchen addition reads as a patch and can void a warranty claim. Insulation batts are more forgiving: an R-13 PINK batt and a comparable fiberglass batt from another maker are functionally interchangeable. FOAMULAR rigid board is not: the Owens Corning branded version carries a specific compressive strength rating per grade, and substituting a weaker board under a slab or behind a backsplash substrate is how you get a callback in two years.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Owens Corning Kitchen Remodeling Is Failing
Each of these is a real pattern we see in Arlington, and each points to a specific underlying cause.
- Ceiling stains in the corner above the kitchen. That’s almost always a shingle course letting go above a valley, usually where the original builders under-nailed. Arlington hail accelerates the wear: a 2019 or 2021 storm can cheat a 25-year shingle out of half its life.
- Drafty backsplash wall in winter. A gap in the wall cavity insulation, or a batt that compressed during the original install. Once Owens Corning fiberglass loses its loft, it stops doing its job.
- Cabinet boxes pulling from the wall. Not a cabinet failure. It’s the substrate behind it – the drywall or sheathing the cabinets hung on. Often the wall behind was never properly insulated or was water-damaged from a roof leak higher up.
- Kitchen feels hotter than the rest of the house in July. Under-insulated attic space over the kitchen, or an FOAMULAR board that got compromised during a prior remodel. Arlington summers push attic temps well past 140°F, and a weak envelope shows up fast.
- Shingle granules in the gutter below the kitchen drip edge. Owens Corning Duration shingles shed granules throughout their life, but a steady stream from one roof section – and only that section – points to a localized failure, often hail-bruised or wind-lifted shingles.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For an Owens Corning-related kitchen scope in Arlington, here’s how the numbers shake out:
| Scope | Installed Range |
|---|---|
| Full kitchen remodel (Owens Corning envelope + finishes) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves the price: whether the Owens Corning envelope needs work (roof plane over the kitchen, insulation upgrade, FOAMULAR replacement), whether permits are pulled and inspections scheduled, cabinet brand and size, and countertop material. KraftMaid and Cambria live on the high end of these ranges; Silestone sits slightly below Cambria on most installs. We issue written change orders before any scope change touches the job. If the allowance isn’t on paper, it’s a surprise waiting for a date.
We’re an independent contractor, not affiliated with Owens Corning, so we’re free to tell you when a substitute product will do the same job for less money. That’s the value of buying local.
DIY or Call Us?
Some of this is safe to check yourself. You can walk the attic over the kitchen and confirm the Owens Corning batt thickness and facing are intact. You can look at the underside of a shingle tab from a ladder and read the printed brand. You can pull the outlet cover off the backsplash wall and shine a flashlight into the cavity to see if insulation is present. None of that puts you at risk.
Where DIY goes wrong is the moment you’re on a wet roof in Arlington after a rain, or opening a wall to check for rot. Roof work is dangerous, and a fall off a 1-story ranch in Arlington is still a fall off a 1-story ranch. Foam-board and insulation replacement inside a wall is safe enough in theory, but the second you find rot or a compromised substrate, the whole scope changes and permit requirements kick in.
Here’s the honest split: if you’re just trying to figure out what failed, do that yourself. If you’re ready to price a fix, call us. Call (888) 590-9867 to schedule your free estimate, and we’ll walk the whole kitchen with you on-site. Our technicians have up to 28 years of experience, and the 90-Day Done Right Promise is written on every contract.
FAQs
Owens Corning Duration shingles carry a limited lifetime warranty on most products, but in Arlington’s hail corridor, real-world life is closer to 18 – 22 years before a storm beats them down. Owens Corning fiberglass insulation lasts decades if it isn’t wet; once moisture gets in, it’s done. Call (888) 590-9867 for an on-site read on your specific situation.
Usually yes. Shingle damage from hail is often patchable if the match is available; a properly insulated wall cavity and one loose cabinet run often solve the “kitchen failure” a homeowner thought would need a full remodel. We’ll tell you straight: if a repair works, we’ll price the repair. Call (888) 590-9867.
A localized Owens Corning shingle repair runs 3 – 6 hours. Insulation replacement in a kitchen cavity runs a half-day. A full kitchen remodel with envelope work runs 4 – 8 weeks depending on cabinet lead times. Permits and inspections add several days but keep the job honest. Call (888) 590-9867 to schedule your free estimate.
We source through building-supply houses in Tarrant County, and we match by product code printed on the material, not by what a salesperson says matches. If the exact Owens Corning series is discontinued, we say so and quote the current equivalent in writing before any material is ordered. Call (888) 590-9867 for a free second opinion on any written estimate you’re holding.
If you’re ready to price your Owens Corning kitchen scope in Arlington, give us a call at (888) 590-9867. Live person answers 24/7, no voicemail box. We’re also set up for KraftMaid, Cambria, and Silestone when those come into the conversation. Barrett & Sons Construction Arlington – ask around, look up the license number, then call. Call (888) 590-9867 to schedule your free estimate.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.