A Barrett company - serving Arlington, TX

PGT Fence Installation in Arlington, TX

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

PGT Fence Installation: The Arlington Owner’s Guide

PGT fence installation in Arlington typically runs $3,500 to $9,000 for a standard residential yard, and most full installs are scheduled within one to two weeks of a signed estimate, not months out. If a panel is leaning, a post is loose, or a gate drags after a Texas storm, we can often make that specific repair sooner. PGT fence products are usually the aluminum and heavy-duty panel systems sold through specialty dealers, and most Arlington owners find out something’s wrong the first time a windstorm knocks a section out of plumb or a gate sags and won’t latch. We’re an independent contractor, not affiliated with PGT.

Call (888) 590-9867

Which PGT Models This Applies To

PGT makes more than one fence line, and the parts don’t swap between them. The aluminum ornamental and pool-code series have their own post caps, bracket styles and picket gauges, while the heavier panel systems use different post sizes and rail profiles. Before we quote anything, we match the part to the model, not to a photo on your phone.

The surest way to identify your line is the dealer label or engraved stamp on the inside of a post or the underside of a top rail. If that’s gone, we measure the post outside dimensions, the picket spacing and the rail height in the field. A half-inch difference in post width means the brackets won’t seat, and that mismatch is the most common reason a homeowner brings home a part that doesn’t fit.

On the OEM-versus-aftermarket question for PGT, our honest answer is this: buy OEM when the part is structural or visible in a row, because color and profile have to match the rest of the run. Aftermarket equivalents are fine for hidden hardware like gate hinges and fasteners when the gauge is right. We don’t claim to carry PGT parts ourselves. What we do is source the correct part through dealer channels and install it, so you’re not stuck driving to three supply houses looking for a match. Our crew members have up to 28 years of experience with these systems, and we’ve installed plenty of other premium brands too – KraftMaid, Cambria and Silestone among them on the interior side.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your PGT Fence Installation Is Failing

Most failed fences in Arlington announce themselves before a panel actually falls. Watch for these:

  • A gate that drags or won’t latch. That’s usually a hinge or post that’s settled, not a bad latch. North Texas clay soil expands and shrinks with the wet-dry cycle, and a post set too shallow will move with it.
  • Posts leaning out of plumb. Loose footings show up first after a heavy rain. A post that’s wobbling at the base needs re-setting, not just a new cap.
  • Rust or white chalky corrosion at the brackets and fasteners. Cheap fasteners corrode fast in our humidity. The fence panel may be fine; the hardware holding it isn’t.
  • Loose or missing pickets. A popped picket or a rattling panel usually means a failed rail or a stretched fastener, and it will spread down the run if you ignore it.
  • Panel sections that rattle or bow in the wind. That points to a weak rail or a missing support, and it’s what fails first when a spring storm rolls through.

Each of those symptoms has a cause you can trace. Treating the symptom – tightening a hinge, propping a post – buys you a few weeks at best. We look at the footing and the hardware, because in Arlington the ground and the weather do most of the damage.

Replacement Cost & What’s Included

Here’s the honest price picture for Arlington fence work, matched to the scope:

Scope Typical Installed Range
PGT fence installation (standard residential yard) $3,500 – $9,000
Vinyl fence installation $3,500 – $9,000
Aluminum fence installation $4,000 – $10,000
Section or panel repair Quoted after we look at the footing and hardware

The range is driven by linear feet, gate count, terrain, and how much of the old fence has to come out. Flat lots with easy access land at the low end; slopes, tight corners and multiple gates push it up. We put the part cost and labor on the estimate as separate line items, so you can see exactly what you’re paying for. Any change to scope arrives as a written change order before we touch the fence. Permits are pulled and inspections signed where the job requires it, and the whole install is backed by our written 90-Day Done Right Promise.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely do the detective work: check the dealer label on your posts, measure the post and picket spacing, and note which sections are failing. That much saves us time and gets you a sharper quote.

Where DIY goes wrong is at the footing and the hardware. Digging out and re-setting a post in North Texas clay without hitting the right depth means it will lean again by the next wet season. Replacing a rail or bracket without the right gauge means the whole run can fail where you patched it. There’s also no electrical or spring danger here, so this isn’t a safety emergency – but a bad post repair is money wasted twice. If you’ve got more than one post moving, call (888) 590-9867 and let us look at it before you buy parts.

FAQs

How long does a PGT fence last in Arlington?
A properly installed aluminum or panel fence typically lasts 20-plus years in our climate. The footing and hardware are what fail first, not the panels, which is why we check both. Call (888) 590-9867 for an exact quote on your yard.

Can a failed section be repaired instead of replaced?
Yes, in most cases – a leaning post or bad bracket can be repaired without touching the rest of the run. We’ll tell you honestly if repair makes sense or if replacement does. Call (888) 590-9867 for a free look.

How long does the install or swap take?
A typical residential install takes two to four days depending on linear feet and gate count. A single-section repair is often a half day. Call (888) 590-9867 to schedule a free estimate and get a real timeline.

How do you source the PGT part?
We match the part to your model through dealer channels, not guesswork. You don’t have to hunt it down yourself. Call (888) 590-9867 and we’ll confirm what fits before we quote.

Ready for a Straight Answer on Your Fence?

If a post is leaning or a section is failing, we’d rather look at it than have you guess. Call (888) 590-9867 for a free estimate on PGT fence installation in Arlington. You’ll get a written, line-item quote with the part and labor spelled out, permits pulled where required, and the 90-Day Done Right Promise on every job. We live twenty minutes away – if something’s wrong, we want to know about it.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch