Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Kitchen Remodeling: The Arlington Owner’s Guide
We handle PGT-specific kitchen remodeling in Arlington, including the cabinet, countertop and backsplash work that PGT’s cabinetry-driven layouts demand, with installed kitchen remodels typically running $14,000 – $45,000 depending on scope, layout and materials. Smaller PGT layouts come in around $9,000 – $20,000. We don’t promise same-day anything on a remodel – nobody rebuilds a kitchen in a day and does it right. Most Arlington owners find us the same way: the PGT cabinets they bought a decade ago have started to fail at the door hinges or the box joints, and they want a contractor who knows the product line, not a generalist guessing.
Key Takeaways
- PGT cabinetry fails at specific, predictable points – knowing which point matters for whether you repair or replace.
- Full PGT kitchen remodel in Arlington: $14,000 – $45,000 installed. Small-kitchen version: $9,000 – $20,000.
- We’re an independent contractor, not affiliated with PGT. We work with their products and we work around their failure points.
- Every permit gets pulled and every price change arrives as a written change order before work starts.
Which PGT Models This Applies To
PGT built kitchen cabinetry across several product lines in the 1990s and 2000s, and the models we see most in Arlington homes split roughly into framed and frameless (full-overlay) construction. Identifying what you have is the first step. The cabinet door on most PGT lines carries a small sticker inside the upper hinge side, or you’ll find a model number stamped on the back panel of the base cabinet – pull out the drawer and look. If the sticker is gone, measure: door thickness, box depth (usually 12″ or 24″), and the hinge cup diameter (typically 35mm on European-style hinges) will tell a cabinet technician which PGT series you’re dealing with.
On the OEM-versus-aftermarket call for PGT specifically: original PGT hinges and drawer slides are increasingly hard to source, and PGT-branded door fronts in their older finishes are essentially gone. Quality aftermarket equivalents – Blum, Grass, or Hettich for hardware – fit the existing bore patterns and hold up better in Texas heat and humidity than the original 1990s hardware ever did. When we quote an Arlington kitchen, we tell owners plainly what the aftermarket swap entails and what it doesn’t. We don’t stock parts and we don’t carry them on a truck. We source what you need.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Kitchen Remodeling Is Failing
- Doors sagging at the hinge. The hinge screws have stripped out of the box frame after years of use, or the original hinge has worn its cup. Both are fixable, but the fix differs.
- Drawer glides that stick or jump the track. The original PGT slides were built for a 25-pound drawer load. Load them heavier, which most of us do, and the plastic rollers wear flat within a few years.
- Water damage at the sink cabinet base. PGT’s 1990s lines used particleboard underlayment in some sink bases. In Arlington’s summer humidity and the slow drips most kitchen sinks develop, that swells fast.
- Face frames separating from the box. Glue joints fail after 15-20 years, especially in unconditioned garages or crawl-space-adjacent walls. If you can fit a fingernail in the gap, the joint has let go.
- Finish checking or peeling. Texas heat cycling through the kitchen window over a PGT cabinet door will cause the original lacquer finish to craze within 12-15 years in most Arlington homes we see.
Replacement Cost & What’s Included
Installed kitchen remodel pricing in Arlington, calibrated to what we actually quote:
| Scope | Installed range |
|---|---|
| Full kitchen remodel (PGT-era layout) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation (replacing PGT boxes) | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: cabinet brand and door style, countertop material, whether the electrical and plumbing need to move, and whether you’re keeping the existing footprint. We quote scope, allowances and every price change in writing. No surprise invoices at the end, because an allowance that isn’t on paper is a surprise waiting for a date. Work is backed by our 90-Day Done Right Promise, written on the contract.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Checking what’s wrong with PGT kitchen cabinetry is safe and worth doing yourself: open and close every door, pull each drawer fully out and push it back, run a flashlight under the sink cabinet, and look at the hinge plates for stripped screws. That tells you what you’re facing before anyone quotes you.
Where DIY goes wrong: re-hanging a cabinet box that’s come off the wall, re-plumbing a sink base, or rewiring for a relocated island are all jobs where a wrong move costs more than the contractor would have. We’ve also seen too many Arlington homeowners try to patch a stripped hinge screw with a longer screw and split the face frame, turning a $40 hinge repair into a cabinet replacement. If it’s structural or behind a wall, call us. (888) 590-9867, free estimate, and we don’t trip-charge inside the county.
FAQs
How long do PGT kitchen cabinets typically last in Arlington? PGT cabinetry built in the 1990s and 2000s generally holds up 15-25 years before the hinges, slides or particleboard sink bases fail. Texas heat and humidity accelerate that. If yours is past 15 years and you’re seeing multiple failures at once, replacement is usually the better money.
Can the failed part be repaired instead of replaced? Sometimes yes. Stripped hinge screws, worn slides and single cracked doors are all repairable, and we quote repair without pressure to replace. When three or more boxes are failing at once, the repair math stops working and we’ll tell you so.
How long does the swap take? A single cabinet door or drawer repair is an hour or two. A full cabinet swap in one wall runs 2-3 days. Full PGT kitchen remodel in Arlington runs 3-6 weeks depending on scope and permit timing, plus countertop fabrication.
How do you source the PGT-compatible part? We measure the existing bore pattern, box dimensions and finish, then source the closest match from our premium cabinet brands – KraftMaid, Cambria and Silestone are the ones we work with most – or from aftermarket hardware makers who match the original spec. We tell you what we’re sourcing and what it costs before we order. Call (888) 590-9867 for an exact quote – estimates are free.
Why Barrett & Sons for Your Arlington Kitchen
Barrett & Sons has been owner-operated since 1998, and Tom Barrett and his sons are on-site most days. Every eligible job gets permits pulled and inspections signed. The permit inspector works for you, not for us – that’s why we like him. And every completed job carries the 90-Day Done Right Promise: one call brings Tom back if something isn’t right. We also offer a Free Second Opinion on Any Written Estimate if you’re not sure about a quote you’ve already got, a $40 Off Any Repair Over $200, No Trip Charge Inside the County, and a permanent 10% Senior & Veteran discount.
Call (888) 590-9867 to schedule your free estimate. A live person answers the phone 24 hours a day, 7 days a week. We’re an independent contractor – not affiliated with PGT, just experienced with their products and the homes that have them.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.