A Barrett company - serving Arlington, TX

PGT Construction in Richland Hills, TX

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

PGT Construction in Richland Hills, TX | Barrett & Sons Construction Arlington

If your Richland Hills home still wears its original 1960s aluminum windows, or your PGT WinGuard units took a beating in the last hail storm, we handle that work across the 76118 ZIP. Here’s the one thing that makes our PGT work in Richland Hills different: almost no job here is new construction. It’s retrofitting impact-rated PGT windows and doors into openings that have already moved with the clay under your slab or pier-and-beam foundation.

Call (888) 590-9867

We’re Barrett & Sons Construction Arlington. We install and service PGT windows, patio doors and sliding units every week across the Mid-Cities, and we’re an independent PGT service provider. We’re not authorized, sponsored or endorsed by PGT. That independence is the point: we’ll tell you when a unit should be repaired and when it honestly needs replacing. Every eligible job gets permits pulled and inspections signed, with pricing in writing before work starts. Call (888) 590-9867 to set up a free estimate.

Why Richland Hills Residents Choose Us for PGT Service

Richland Hills homeowners between 50 and 70 have usually already dealt with a call center that quoted one number and billed another. We don’t work that way. Barrett & Sons was founded in 1998 and is owner-operated. Tom Barrett and his sons are on-site most days, and our technicians bring up to 28 years of experience to PGT hardware, glazing and install tolerances.

We know the PGT lines that live on these ranch walls: WinGuard Aluminum Impact, WinGuard Vinyl Impact, the Aluminum Series single-hung and horizontal sliders, and the Vinyl Series double-hung windows and sliding patio doors. When a part is still in production, we source the OEM PGT replacement. When it isn’t, we use quality aftermarket glass or hardware and say so up front. We carry the same premium-brand approach across every trade we touch, from GAF and CertainTeed on roofs to Andersen and Marvin on windows.

Richland Hills is small, and we’re close. If something on your installation isn’t right, that matters. Every completed job carries the written 90-Day Done Right Promise: one call brings Tom back to make it right.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common PGT Construction Problems We Solve in Richland Hills

  • Warped vinyl WinGuard sashes in full sun. On west- and south-facing ranch walls, PGT vinyl WinGuard sashes bow and warp over time. The weather seal breaks and wind-driven rain sneaks past the sill. Richland Hills summers push those exposures harder than almost anywhere in the Metroplex.
  • Hail-cracked interlayer under an intact pane. Spring hail in 76118 can crack the laminated glass interlayer inside a WinGuard unit without breaking the outer pane. The window looks fine until you catch it at an angle. We document the damage and handle the sash or unit replacement so your insurance claim has clear records.
  • Corroded aluminum sills on older frames. The Aluminum Series frames on 1960s-70s Richland Hills ranches pit and corrode at the sill, where sprinkler overspray meets clay splash. That pitting opens a path for water infiltration.
  • Sliding patio door rollers and tracks. PGT vinyl sliding door rollers wear down and load up with Blackland clay grit. The door gets hard to slide, and eventually the frame pulls out of square.
  • Racked openings that won’t take a plumb unit. When the foundation has moved, the original rough opening is no longer true. A new PGT unit won’t sit right until the opening is squared and shimmed.

PGT Service in Richland Hills: What Local Conditions Mean for Your Equipment

Richland Hills is built out. Inside roughly 3.5 square miles there’s essentially no undeveloped land, which means nearly every PGT job here is a retrofit, not new fenestration. You’re pulling original single-pane aluminum windows out of 1950s-70s single-story brick-veneer ranches and fitting impact-rated WinGuard units into the same rough openings. That changes the whole job. The clay under these slabs swells and shrinks through North Texas wet-dry cycles, and it has already moved the old frames. In a typical Richland Hills ranch, those original windows have racked slightly with the foundation, so a new PGT unit won’t sit plumb until the opening is squared and shimmed first. The expansive Blackland-area clay is the reason. It’s also why summer installs get scheduled early in the day: vinyl PGT frames set in 100°F heat need shimming and sealing before the frame relaxes. Weatherproofing a retrofit is a different skill than nailing in new-construction windows, and it’s the skill that keeps a Richland Hills window dry for the next twenty years.

PGT Models & Products We Service in Richland Hills

We work on all four of the PGT families that show up in this housing stock. That means WinGuard Aluminum Impact Series and WinGuard Vinyl Impact Series for storm-rated protection, the Aluminum Series single-hung and horizontal slider windows still common on these ranches, and the Vinyl Series double-hung windows and sliding patio doors.

On the parts side, we use OEM PGT replacement sashes, rollers, weatherstripping and hardware wherever the unit is still in production. Where OEM parts are no longer made, we use quality aftermarket glass or hardware and tell you which is which. We do not claim to stock PGT parts locally. Each part gets sourced for the specific job. On a 20-year-old vinyl WinGuard window with failed seals and warped sashes, replacing the whole unit is usually the more honest call than chasing parts.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

PGT Service Pricing in Richland Hills

Here’s where the money goes for PGT work in Richland Hills. Exact pricing depends on unit count, opening condition and whether the rough opening needs squaring. These are the ranges we work within:

Service Typical Range
Window Replacement $4,500 – $15,000
Impact Window Installation $8,000 – $25,000
Roof Replacement & Installation $8,000 – $20,000
Roof Repair $400 – $1,800

A free estimate includes an on-site look at the openings, a written line-item quote, and a straight answer on repair versus replace. No trip charge inside the county. Call (888) 590-9867 for an exact quote on your Richland Hills home. Estimates are free.

Serving Richland Hills, TX – Our Local Coverage Area

We serve Richland Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – PGT Construction in Richland Hills

Service Areas Near Richland Hills

We serve homeowners across the Mid-Cities and the surrounding cities. Along with our Richland Hills service area, that includes Arlington, Kennedale, Forest Hill, Hurst and Bedford. Read more about our PGT service and areas like Hurst and Bedford. Wherever you are in the Mid-Cities, we’ll come to your door.

Book Your PGT Service in Richland Hills Today

If your Richland Hills home needs PGT window service, an impact window installation or a roof that took a hail hit, call Barrett & Sons Construction Arlington at (888) 590-9867. Estimates are free, pricing is in writing, and every eligible job gets permits pulled and inspections signed. We’re the name-on-the-truck contractor who answers his own phone and stands behind the work with a written 90-Day Done Right Promise.

Written by the team at Barrett & Sons Construction Arlington.

Need Construction help in Richland Hills? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Richland Hills

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch