Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Plant Prefab Bathroom Remodeling: The Arlington Owner’s Guide
We install Plant Prefab-compatible bathroom remodeling in Arlington, and a complete gut-to-finish bathroom project typically runs $9,000 – $28,000 installed. Most Arlington owners find out something is wrong during a slow drain, a soft spot around the toilet flange, or a shower pan that flexes underfoot. Plant Prefab builds modular and panelized homes, so the bathroom comes as a factory-built wet wall and floor cassette. When a valve, drain, or pan fails, the fix has to fit the plant’s factory dimensions, not a standard site-built rough-in.
Every job we quote includes a written scope with line-item allowances, a free second opinion on any estimate you’ve already received, and a written 90-Day Done Right Promise on the completed work. We’re an independent service provider and not affiliated with Plant Prefab. Call (888) 590-9867 for a free estimate.
Key Takeaways
- Installed Plant Prefab bathroom work in Arlington: $9,000 – $28,000, written scope before any work starts.
- Factory bath modules use proprietary rough-in dimensions. Measure the cassette, not the finished tile, when matching parts.
- Trinity clay soil and North Texas slab movement is the leading cause of cracked pans and flange failures in this market.
- Shower valve and check-valve work is a licensed-plumber job. We don’t recommend DIY on the wet wall.
Which Plant Prefab Models This Applies To
Plant Prefab supplies panelized and modular systems rather than a single product line, so the right replacement part depends on which bath cassette your home received. Owners in Arlington typically have one of two layouts: a factory wet-wall module where the plumbing is pre-installed in a framed wall panel, or a full bathroom “pod” that arrives with the shower, toilet, and vanity framing already set. The simplest identification path is the data plate on the module itself. Look inside the vanity cabinet, behind the access panel under the sink, or on the inside face of the module wall for a label listing the cassette model, rough-in dimensions, and fabrication date. Photograph that label before you call anyone.
Then measure. Plant Prefab wet walls run to the millimeter, so a standard 60-inch tub-and-shower surround may not seat against the factory opening without a shim kit or a custom trim transition. For the OEM-vs-aftermarket decision, the honest answer is this: aftermarket valve cartridges, drain assemblies, and shower pans can match a factory bath cassette, but you have to verify tolerances first. We don’t stock or carry parts, and we don’t claim to. We measure the module, source the correct part, and install it under a written quote.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Plant Prefab Bathroom Remodeling Is Failing
- Tile grout cracking along the floor cassette seam. The cassette has shifted slightly against the sub-floor, usually from Arlington’s clay-soil movement. Movement at a factory panel joint means the flexible sealant needs renewal before water gets behind it.
- Slow or gurgling drain from the shower or tub. The factory drain assembly is catching hair and soap scum, or the trap has partially collapsed. Gurgling usually points to a venting issue in the wet wall, not just a clog.
- Flexing or “spongy” shower pan underfoot. The pan’s mortar bed or foam base has degraded. This is the most common failure we see in Arlington, and it’s the one most likely to leak into the floor cassette below.
- Toilet flange wobble or a water ring at the base. Slab movement and aging wax or rubber gaskets cause the flange seal to fail. A loose flange means water is moving under the tile, not just on top of it.
- Shower valve dripping, or water that won’t hold temperature. The cartridge in a factory valve body has worn out. On Plant Prefab wet walls the cartridge is replaceable, but the valve body itself is set behind the tile, so confirm which part is failing before ordering.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed Plant Prefab bathroom remodeling in Arlington runs $9,000 – $28,000 depending on the scope. A small bathroom remodel lands in the lower band at $5,000 – $12,000. A walk-in shower installation runs $4,500 – $12,000, a tub-to-shower conversion $3,500 – $10,000, a shower replacement $3,000 – $8,500, and a vanity installation $800 – $3,000. What drives the range: whether we’re replacing a single failing component or rebuilding the cassette, whether tile is being matched or replaced, and whether the valve body or drain assembly needs to come out of the wet wall.
| Scope | Installed Price Range |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
Parts and labor are itemized separately on the written quote, so you see what the cassette, valve, and fixture cost versus the install. Any change to scope comes in writing before work starts. All completed work is covered by the 90-Day Done Right Promise, and every eligible job gets permits pulled and inspections signed.
DIY or Call Us?
Some checks are safe. You can photograph the module label, measure the cassette opening, look under the vanity for the access panel, and confirm whether the valve or the cartridge is dripping by watching the shower head with the valve shut. What we don’t recommend is opening the wet wall. The factory valve body sits behind tile and a waterproofing layer, and if the cartridge is seized or the valve is a proprietary body, a DIY attempt can crack the housing or compromise the waterproofing. On a panelized Plant Prefab bath, tearing out that factory joint without resealing it correctly is how a $500 cartridge job becomes a $7,000 cassette repair. Any gas, electrical, or supply-line work behind the wall is a licensed-trade job. For anything beyond a visual check, call (888) 590-9867.
FAQs
A well-installed shower pan or wet-wall valve typically lasts 15 to 25 years, but Arlington’s shrink-swell clay soil and hot summers shorten that window. Pans and flanges that sit on a moving slab commonly fail in 10 to 15 years. If your home is older and the tile grout or pan hasn’t been checked in a decade, have it inspected before it fails.
Sometimes, yes. A worn valve cartridge or a failed flange gasket can be swapped without pulling the cassette. A flexing pan or a cracked cassette seam usually can’t be patched and needs replacement. The honest test is whether the failure is at a renewable component or at the factory joint. We’ll tell you which one you’re looking at on the free estimate.
A cartridge or drain swap is usually a half-day job. A shower pan or walk-in shower replacement runs three to five days for a standard module. A full bathroom remodel is two to three weeks, depending on tile, fixture lead times, and how much of the wet wall has to come open.
We start from the module’s data plate and the measured rough-in, then match the cassette, valve, or drain to a manufacturer that publishes the dimensions. We carry premium bath and kitchen brands including KraftMaid, Cambria, and Silestone, but we don’t stock Plant Prefab factory parts, and we won’t pretend to. We’ll quote the exact part on the written scope and confirm compatibility before we order.
If you’re not sure yet what’s failing, that’s fine. Call (888) 590-9867 for a free estimate and we’ll look at the label, the measurements, and the wet wall. We’re a local, owner-operated Arlington contractor serving Arlington and nearby areas, and any qualifying repair over $200 gets $40 off. Senior and veteran homeowners get a permanent 10% discount, and there’s no trip charge inside the county.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.