Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Plant Prefab Fence Installation: The Arlington Owner’s Guide
Plant Prefab fence installation in Arlington typically runs $3,500 to $9,000 fully installed, and most swap-outs for a single failed section or driver can be scheduled within days, not weeks. Yes, the range is wide – it covers everything from patching one post footing to replacing a full prefab run along a property line. If your fence is starting to lean after a Gulf storm, the gate drags on the ground, or a panel has pulled loose from its driver, you are looking at one of those two situations. We install Plant Prefab-compatible fence panels, posts, and gates for owners across Arlington, and we quote the work in writing before anything moves.
Which Plant Prefab Models This Applies To
Plant Prefab builds fence panels and post-and-driver assemblies for its modular and site-built lines, and the fence components themselves follow the same junction logic used across its systems: standard post spacing, standard panel widths, and rail profiles keyed to the layout of the unit. If your home was delivered as a Plant Prefab modular, the fence plans usually live in the owner’s packet that came with the home, not on the unit itself.
To identify yours, measure the post spacing center-to-center first. If it lands near 8 feet, you have the standard panel grid. Then look for a manufacturing label on the inside face of a rail near the corner post – most panels carry a small sticker or stamped tag with the model line and panel spec. If the label is gone, photographs of the hardware plus the post spacing are enough for us to match it.
The OEM-versus-aftermarket call matters here. Plant Prefab’s OEM panels and post hardware are made to match their own rail profile and junction detail. A quality aftermarket panel from a name brand like Belgard’s fencing line or a comparable Texas supplier will fit the opening but will not always match the original rail profile if you are blending new sections with old ones. When only one section failed, we try to match the profile, not force a different one. When the whole run is going, the aftermarket route often saves money without visible compromise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Plant Prefab Fence Installation Is Failing
- Posts leaning after a storm. North Texas soil, especially the expansive clay common across Arlington, swells with spring rain and shrinks through the dry months. That movement pulls footings loose over time, and a post that was plumb last year will be off two or three inches after a single windy front.
- Gate dragging or no longer latching. Usually a hardware issue before a structural one. A sagging gate is often a hinge or a post that shifted, not a failed panel, so the fix is smaller than you might fear.
- Panels separating from posts. The rail connection works loose as fasteners back out, and once one junction goes, the panel loses its rigidity. If it has pulled free at more than one post, the whole section may be done.
- Rot or soft spots at the base. Wood panels and even some composite products take the worst of the moisture at ground contact. Press a screwdriver into the post at the soil line – if it slides in easily, that section is on borrowed time.
- Cracked or warped rails. Texas heat works on the material through summer. Visible cracks or a rail that has begun to bow are usually a sign the material has passed its useful life in this climate, especially on panels that have been up a while.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Arlington, plan on $3,500 to $9,000 for a complete Plant Prefab-compatible fence installation. A single-section patch or one post and driver runs on the low end. A full run with new posts, gates, and hardware runs toward the top. The range depends on linear footage, material choice, gate count, and how much you are factoring in removal and haul-away of the old material. Post footings in our soil often take more concrete and more depth than owners expect, and that is part of what moves the price.
Every quote we hand you lists the parts, the labor, and the disposal separately – no bundled number you have to guess at. If a footing turns up deeper or a hidden post is beyond saving, you get a written change order before anyone touches a tool. The work itself is covered by our 90-Day Done Right Promise: if it isn’t right, we come back and make it right.
DIY or Call Us?
Some of this is safe to check yourself. Walk the line and look for lean, press a driver-bit or screwdriver into the soil line to test for rot, and take photos of any labels or stamps on the panel edges – those are the pieces that help you match parts. Measuring post spacing is fine too.
What we would not do yourself is dig out and reset post footings or wrestle a long panel into place on your own. A post that comes up unprepared can swing or fall, and a hung gate that lets go under load is a real injury risk. It also helps to have the permits pulled on any new fence over six feet, and that is work we handle as part of every eligible job. Call (888) 590-9867 to set up a free estimate.
FAQs
How long does a Plant Prefab fence last in Arlington? A properly installed Plant Prefab fence typically lasts 15 to 20 years in this climate with reasonable care, though the expansive clay soil and summer heat shorten that if footings weren’t set right to begin with. Wood posts at ground contact are the first thing to go. Call (888) 590-9867 for a look at yours – the estimate is free.
Can a failed section be repaired instead of replaced? Often yes. If the panels and rails are sound and only a post or hinge failed, a targeted repair saves money. If the failure has spread to two or more junctions or a whole panel is cracked, replacement is usually the better long-term call. Call (888) 590-9867 and we’ll give you an honest answer.
How long does the swap take? A single-section or post replacement is typically a one-day job in Arlington. A full run takes a few days depending on footage, gate count, and weather. Post footings need time to cure before panels go up, and that cure time is baked into the schedule, not a surprise. Call (888) 590-9867 for a date.
How do you source the part? We match the panel and hardware to your Plant Prefab model using the post spacing and label details, then order through the manufacturer or a quality Texas supplier if OEM parts aren’t available. We don’t carry parts on a truck, so the part is ordered for your job. Barrett & Sons Construction Arlington is an independent contractor and is not affiliated with Plant Prefab. Call (888) 590-9867 to get the process started.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.