A Barrett company - serving Arlington, TX

Quikrete Bathroom Remodeling in Arlington, TX

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Quikrete Bathroom Remodeling: The Arlington Owner’s Guide

Quikrete bathroom remodeling in Arlington typically lands between $9,000 and $28,000 installed, depending on whether you’re reworking a hall bath or rebuilding a primary suite, and most projects are scheduled rather than done same-day because tile, thinset, and waterproofing all need time to cure in North Texas heat. If you’re calling about a failed mortar bed, a crumbling shower pan, or a floor patch that never bonded, we’ll walk through what you’re seeing and price the fix in writing.

Call (888) 590-9867

Most Arlington owners discover the problem the same way: a tile pops loose in the guest bath off Bowen Road, the shower floor feels hollow underfoot, or a skim coat over Quikrete patch turns chalky within a season. That’s usually a substrate or mix issue, not bad luck.

Key Takeaways

  • Quikrete bathroom products fail most often from wrong mix ratios and slab movement, not product defects.
  • Arlington’s expansive clay soil moves seasonally, and that shows up first in bathroom floor and shower pan work.
  • Installed bathroom remodeling runs $9,000 – $28,000 here; targeted repairs are quoted line by line.
  • We’re an independent contractor, not affiliated with Quikrete.

Which Quikrete Models This Applies To

Quikrete doesn’t make a single “bathroom remodel” product, so what you’re really matching is the right mix to the right job. Their bathroom-adjacent line covers Floor Resurfacer, Fast-Setting Concrete, Sand/Topping Mix, Mortar Mix, and the vinyl-patch and feather-edge compounds that show up under tile and around shower pans.

The compatibility gotcha most homeowners miss: Topping Mix and Sand Mix are not interchangeable for shower work. Topping Mix (usually labeled as a 3:1 sand-to-cement blend) is dense and shrinks differently than Sand Mix, and using the wrong one under a sloped shower pan in an Arlington home can crack along the drain collar within a year.

How to identify what you have: read the bag’s product code (the four-digit prefix before the weight), check the printed mix ratio on the back panel, and measure the depth of the area you’re patching. Quikrete’s 80 lb. bags are the standard retail size, and coverage runs roughly 0.6 cubic feet per bag, so a 4-foot shower pan at 1.5 inches thick needs about six bags minimum.

On the OEM-vs-aftermarket question: for patching compounds and mortars, Quikrete’s retail line is the practical spec, and premium aftermarket equivalents (Custom Building Products, Mapei) exist but require different cure times. For finish materials we set KraftMaid vanities, Cambria and Silestone surfaces, and we’ll specify which Quikrete mix goes under what.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Quikrete Bathroom Remodeling Is Failing

  • Hollow sound under shower or bathroom tile. Usually means the mortar didn’t bond to the substrate or the mix was too dry. Tap the area with a screwdriver handle; a dull thud versus a sharp click tells you a lot.
  • Hairline cracks following the drain or floor perimeter. Arlington’s clay soil swells and shrinks with our wet springs and dry summers, and a rigid patch over a moving slab cracks at the seams first.
  • Chalky, dusty surface on a Quikrete patch. Over-watering during mixing leaves unreacted cement at the surface. It never fully cures hard and won’t hold thinset.
  • Tile popping loose at the wall-to-floor joint. Often a lack of movement joint. The patch held, but there’s nowhere for expansion to go, so the bond fails at the edge.
  • Water pooling around the shower drain instead of draining. A shower pan was built with the wrong slope or the wrong mix. This is the one that becomes a subfloor repair if you wait.

Replacement Cost & What’s Included

Full bathroom remodeling in Arlington runs $9,000 – $28,000. Small bathroom remodels run $5,000 – $12,000, walk-in shower installation $4,500 – $12,000, tub-to-shower conversions $3,500 – $10,000, shower replacements $3,000 – $8,500, and vanity installation $800 – $3,000. What drives the range: substrate condition, whether we’re pulling permits, tile selection, and whether the subfloor needs replacement.

Every quote comes with line-item pricing, and if the scope changes once the wall is open, you’ll get a written change order before work continues. That’s the whole point. An allowance that isn’t on paper is a surprise waiting for a date.

All work is covered by our written 90-Day Done Right Promise. If something’s wrong, one call brings Tom back to make it right.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely check bag labels, measure the area you’re patching, tap tiles for hollow spots, and photograph everything for a quote. That’s useful information.

Where DIY goes wrong on bathroom work: mixing Quikrete by eye instead of by ratio, skipping the movement joint, and waterproofing over a wet patch. A shower pan that fails after the tile is set means tearing out the tile you just paid for. And if you’re touching anything near the electrical outlet, GFCI circuit, or water heater lines, call a licensed pro first. That’s not scare tactics; it’s just how it is.

Call Barrett & Sons Construction Arlington at (888) 590-9867 for a free estimate. We’re an independent contractor, not affiliated with Quikrete.

FAQs

Contact

Call Barrett & Sons Construction Arlington at (888) 590-9867 for a free estimate. Every quote is written, every permit is pulled, and every price change comes in writing before the work starts. We proudly serve Arlington and the surrounding communities.

Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch