A Barrett company - serving Arlington, TX

Quikrete Driveway & Pavers in Arlington, TX

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Quikrete Driveway & Pavers: The Arlington Owner’s Guide

We install Quikrete-compatible driveways and paver systems across Arlington, and most full paver driveway installations here run $7,000 – $18,000; concrete driveway installations run $4,500 – $12,000. Quikrete is a materials brand (bagged concrete, sand, jointing and base products), so the “part” that fails is rarely the bag itself – it’s the base, the joint sand, or a panel of poured concrete. Owners usually figure this out the same way: a hairline crack in the driveway widens over one summer, a paver edge sinks after spring rain, or the joint sand washes out and the whole surface starts shifting. By the time it’s obvious, the fix is usually bigger than the symptom looks.

Call (888) 590-9867

Which Quikrete Models This Applies To

Quikrete isn’t a single product line, and that matters when you’re trying to match a repair to what’s already on your ground. The bagged concrete mixes most Arlington driveways were poured with fall into a few families: high-early-strength (often called Fast-Setting or similar, labeled by cure time, not a model number), 5000 psi high-strength mixes, and standard 4000 psi mixes. Sand and paver base products are sold by volume and use, not by model. Joint sand is sold as polymeric or plain – and this is the compatibility gotcha people trip on. Polymeric joint sand doesn’t bond reliably to plain sand residue or to joints wider than about 1/2 inch; pour it into an oversize joint and it crumbles out by the next rain, not because the product is bad but because the joint was never right for it.

To identify what you’re dealing with, read the printed mix designation on the original pour records (if you have them) or have a small core sample tested for compressive strength. Old bags and labels fade, so photos of the original label help. On the OEM-vs-aftermarket question: Quikrete’s own line of joint sand, bonding agents and concrete mixes are the OEM equivalents here, and a quality aftermarket polymeric sand from a named manufacturer is a legitimate substitute for most repairs. What we won’t do is substitute a generic bag with no verifiable spec sheet for structural work – on an Arlington driveway, the mix strength is the whole ballgame. We’re an independent service provider and not affiliated with Quikrete; we simply install and repair using their materials and compatible equivalents.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Quikrete Driveway & Pavers Is Failing

  • Hairline cracks that spread over a season. Shrinkage cracks are normal in poured concrete, but once a crack widens past a credit-card thickness, water is getting under the slab and the base is moving.
  • Joint sand washing out after rain. Plain sand in pavers migrates, and in Arlington’s clay-heavy soil the water has nowhere to drain fast, so joints empty and pavers loosen. Polymeric sand installed into the correct joint width holds.
  • Pavers rocking or sinking at the edges. That’s almost always base failure, not the paver. A paver that moves means the compacted base underneath has lost compaction or was never deep enough.
  • Efflorescence – the white chalky bloom. Moisture moving through the concrete carries salts to the surface. It’s cosmetic, but persistent bloom means water is getting in somewhere it shouldn’t.
  • Spalling or surface flaking on the driveway pad. Freeze-thaw cycles in North Texas winters plus de-icing salts can flake the top layer. On a driveway older than 15 years, spalling often means the surface is done, not just dirty.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Arlington, here’s what repair and replacement actually run. Paver driveway installation is $7,000 – $18,000, concrete driveway installation is $4,500 – $12,000, asphalt paving is $3,500 – $9,000, driveway replacement is $5,000 – $14,000, and driveway sealing runs $250 – $700. A paver patio install is $3,500 – $11,000 if you’re extending the work.

Job Installed Range (Arlington)
Paver driveway installation $7,000 – $18,000
Concrete driveway installation $4,500 – $12,000
Driveway replacement $5,000 – $14,000
Asphalt driveway paving $3,500 – $9,000
Driveway sealing $250 – $700

What drives the range: driveway square footage, base depth (Arlington’s expansive clay soil often needs a deeper, better-compacted base than a coastal market), demolition and haul-off, drainage correction, and paver selection. Our quote breaks out materials, labor, and any allowance line-by-line, so you see the Quikrete materials cost separate from the crew time. Every price change arrives as a written change order before the work happens. If the base turns out worse than the first look suggested, you get the number in writing, not a surprise invoice at the end.

DIY or Call Us?

There are things you can safely check yourself. Walk the driveway and note where pavers rock or where joints have emptied. Look at the crack widths with a tape measure. Test drainage by running a hose and watching where water pools. Those observations are useful, and they’ll help the first conversation go faster.

Where DIY goes wrong on this work is the base. Resetting a paver without fixing the compacted base underneath just means it fails again in six months. Replacing a whole concrete panel isn’t a bag-level job either – mixing, placing, finishing and curing a Quikrete structural mix to spec takes the right tools and a feel most homeowners don’t have, and a bad pour in Arlington’s clay is expensive to undo. We’d rather tell you plainly: patching a small joint by hand is reasonable; re-pouring a slab or re-laying a driveway section is not a weekend job. Call (888) 590-9867 and we’ll give you an honest read before you commit to anything.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch