Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sakrete Fence Installation: The Arlington Owner’s Guide
Sakrete isn’t a fence brand – it’s the concrete mix that holds the posts. If your fence posts are leaning, wobbling, or the mix at the base has cracked and crumbled, the fix isn’t a new fence; it’s resetting those posts properly with the right Sakrete product and getting the setting depth right for Arlington’s clay soil. Typical installed cost for post resetting, new post installation, or full fence replacement here runs $3,500 – $9,000 depending on linear footage and material, and we schedule estimates within a few days. Most homeowners notice the problem after a storm pushes a post sideways, or when they grab the gate and feel the whole run move. Calls are answered by a live person around the clock at (888) 590-9867.
Which Sakrete Products Apply to Fence Posts
Sakrete makes several concrete mixes that work for fence posts, and picking the wrong one is the most common reason a post fails early. The two you’ll see at any Arlington hardware store are Sakrete Fast-Setting Concrete (the red bag) and Sakrete Post Setting Mix (sometimes labeled High-Strength Concrete Mix). Fast-Setting is the right call when you need the post stable within an hour or two. Post Setting Mix cures slower but reaches higher compressive strength and handles the seasonal shrink-swell of North Texas clay better over the long haul. For a 4×4 post in a 10-inch hole, one 50-pound bag covers roughly 12 inches of depth; an 8-inch hole takes less, but 8 inches is too narrow for our soil. Check the bag label for the mix ratio and cure time before you buy. There’s no true “OEM vs. aftermarket” decision here – Sakrete is a commodity product, and the generic store brand at half the price is often the same portland cement blend with a different label. What matters more is whether the hole is dug wide enough and deep enough, and whether the post is braced while it cures. We specify which mix we’re using in the written scope so there’s no guessing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sakrete Fence Installation Is Failing
- The post rocks when you push it. The concrete collar has cracked away from the post or the surrounding soil, so the post has nothing holding it. This usually happens because the original hole was too shallow or too narrow for the post size.
- The concrete at the base is cracked or powdery. That means the mix was too wet when poured, or the bag was old and the cement had lost its punch. Arlington’s summer heat speeds up the reaction, so an overwatered mix can fail within two or three seasons.
- The gate sags or drags on the ground. A gate post takes more load than a line post because the gate swings on it. When the gate post mix gives way, the gate drops and the latch stops lining up.
- Posts lean after heavy rain. North Texas clay expands when wet and shrinks when dry, and a shallow footing gets pushed around by that movement. Posts set less than 24 inches deep in Arlington soil are the ones that lean first.
- The fence line has a wave to it. If you can see the tops of the posts undulating rather than running straight, several footings have shifted. That’s a post-setting problem, not a picket problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Full fence replacement in Arlington runs $3,500 – $9,000 for a typical residential lot, and that’s the range whether you’re doing wood, vinyl, or a mix of materials. Where you land in that range depends on linear footage, fence height, gate count, material choice, and how many old posts need to come out of clay that’s been baking since last summer. Post-only resets cost less – we quote those as a separate line. What’s included: digging, old post removal where needed, new Sakrete mix (named on the scope), post setting, and cleanup. The written estimate itemizes materials and labor separately so you can see what the concrete and hardware cost versus the crew time. Every job is backed by our written 90-Day Done Right Promise – if a post we set starts to move in the first ninety days, Tom comes back and fixes it, one call. No surprise invoices at the end; if the scope changes, you get a written change order before we touch another post.
DIY or Call Us?
You can safely check a few things yourself. Push on each post and note which ones move. Look at the concrete collar for cracks or powder. Measure how deep the post is buried by digging down carefully with a trowel until you hit the top of the concrete. And check the gate – if it drags, the gate post is the likely culprit. Where DIY goes wrong is in the reset itself. Pulling a post out of Arlington clay without tearing up the surrounding fence, digging a hole wide enough for proper Sakrete volume, mixing the right ratio, plumb-bracing the post for the cure window, and getting the depth right for our soil – those are the steps that separate a ten-year post from a two-year post. One bad bag of Sakrete is a $10 savings and a $400 do-over. Call us at (888) 590-9867 for a free estimate and we’ll tell you honestly whether you need one post reset or the whole run. Barrett & Sons Construction Arlington is an independent service provider and is not affiliated with Sakrete.
FAQs
A properly set post using Sakrete Post Setting Mix, dug 24 to 30 inches deep in a hole at least three times the post width, will last 15 to 20 years in this soil and climate. Cedar posts often fail before the concrete does. The weak link is usually the depth and hole width, not the mix brand.
Sometimes, yes. If the post itself is sound and only the concrete collar has failed, we can dig out the old mix, reset the post in fresh Sakrete, and save the fence. If the post wood is rotted below grade, it has to come out. We’ll tell you which case you’re in after a quick look – call (888) 590-9867 and estimates are free.
A single post reset is typically a one-day job. A full fence replacement for an average Arlington lot runs two to four days, depending on footage and weather. Fast-Setting Sakrete lets us move to the next step within a couple of hours, which keeps the schedule tight, but we never rush the cure on gate posts.
We buy Sakrete from the same local building supply yards you use, and we name the specific product on your written estimate so you can verify it. Hardware – galvanized brackets, hinges, latches – is specified the same way. Nothing comes out of a mystery van; you’ll see the labeled bags on your job site. Call (888) 590-9867 for a free estimate.
Fence problems in Arlington are almost always footing problems, and footings are fixable. If your fence is leaning or your gate has started to drag, call (888) 590-9867 to schedule your free estimate – we’ll look at every post, tell you what we’d do, and put the scope in writing before any work starts. We also install KraftMaid, Cambria, and Silestone on the interior side of the business if you’re planning anything inside the house while we’re there.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.