A Barrett company - serving Arlington, TX
S

Sterling Fence Installation in Arlington, TX

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Sterling Fence Installation: The Arlington Owner’s Guide

Barrett & Sons Construction Arlington installs Sterling fence systems across Arlington, with typical installed pricing between $3,500 and $9,000 depending on fence run, material, and gate count. We schedule estimates within a few days of your call, and we’re not affiliated with Sterling itself – we’re an independent installer who knows their product line well. Most Arlington homeowners start this search the same way: a post has started leaning after a heavy rain, a gate drags on the ground, or a panel is bowing, and they want to know whether it’s a repair, a replacement, or something bigger going on underground.

Call (888) 590-9867

Key Takeaways

  • Sterling fence installation in Arlington runs $3,500 – $9,000 installed, with the range driven by linear feet, material, and gates.
  • We’re an independent installer, not a Sterling dealer or affiliate.
  • Texas clay soil and summer heat are the two biggest reasons Arlington fences fail early.
  • Every price change arrives as a written change order before work starts.

Which Sterling Models This Applies To

Sterling builds fencing in several lines, and the differences matter when you’re matching parts or planning a repair. Their vinyl privacy and picket systems are the most common in Arlington neighborhoods, with aluminum and ornamental steel lines showing up more on commercial corners and HOA-fronted lots. Identifying yours starts with a look at the post cap or the inside face of a rail – Sterling typically stamps or labels the profile there. If the label has faded, measure the rail width and post dimension; those two numbers will tell an experienced installer which series you’re working with.

On the OEM-versus-aftermarket question, here’s the honest answer: for posts, rails, and pickets, a quality aftermarket equivalent will hold up just as well as Sterling’s own parts, often at a lower price, because the profiles are standardized. Where OEM makes more sense is on proprietary caps, brackets, and gate hardware – aftermarket versions sometimes fit loosely and rattle in the wind. Our crews have up to 28 years of experience between them, and we’ve replaced enough fence components in Arlington to know which parts to source OEM and which to source from a trusted supplier. We’ll tell you which is which on your specific fence.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Sterling Fence Installation Is Failing

  • Posts leaning or rotating after rain. Arlington’s clay-heavy soil swells when wet and shrinks when dry, and a post set in a shallow hole without proper concrete depth will move with it. This is the most common failure we see after a wet spring.
  • Gate sagging or dragging on the ground. Usually a hinge or gate frame issue rather than the post itself, though sometimes a stressed post is the cause. Worth checking both before assuming the gate is shot.
  • Loose or popped pickets and rails. On vinyl, this usually means a hidden fastener has cracked from heat expansion, which is common in Arlington’s 100-degree summers. On aluminum or steel, it’s often a fastener that wasn’t torqued properly on the original install.
  • Rust streaks or discoloration on metal components. Galvanized or powder-coated hardware failing earlier than expected, usually because the coating was scratched during installation and never touched up.
  • Panels bowing or sagging between posts. Often a sign of rails that were undersized for the span, or post spacing that pushed past what the material can handle. This one usually points to a full section replacement rather than a spot repair.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Sterling fence installation in Arlington lands in the $3,500 – $9,000 range for most residential runs. A short privacy fence with one gate sits near the low end; a longer perimeter with multiple gates and a mix of materials pushes toward the top. Line-item pricing looks roughly like this:

Item Typical Range (Arlington)
Vinyl fence, installed $3,500 – $9,000
Aluminum fence, installed $4,000 – $10,000
Post replacement, per post Quoted after site inspection
Gate hardware replacement Quoted after site inspection
Full section replacement Quoted after site inspection

What drives the number up: linear feet, material choice, gate count, and whether your posts need to be reset in concrete (common in older Arlington yards). What we include: hauling off the old fence, setting posts to proper depth, and inspecting and signing off on any permitting Arlington requires for your lot. Every completed job is backed by our 90-Day Done Right Promise. If something isn’t right, one call brings Tom back out.

DIY or Call Us?

Some fence work is genuinely doable on your own: swapping a gate hinge, replacing a cracked picket cap, touching up a rust spot on a steel post. Those are quick fixes that don’t require special tools or a permit.

Where it goes wrong is post setting and full section replacement. A post that isn’t set to the right depth and concrete weight in Arlington’s clay soil will lean within a season – we’ve re-set posts that were installed exactly that way a year before. And digging near an existing fence line means finding gas, water, and utility lines the hard way if nobody called 811 first. We pull permits and call for locates before we dig, every time, and that’s not something most homeowners want to handle solo. If you’re not sure whether your issue is a quick fix or a full replacement, call (888) 590-9867 and we’ll tell you straight, even if the answer is “you can handle that one yourself.”

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch