A Barrett company - serving Arlington, TX

Tamko Kitchen Remodeling in Arlington, TX

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tamko Kitchen Remodeling: The Arlington Owner’s Guide

If you’re pricing kitchen work in Arlington and your Tamko material is part of the picture, expect a full kitchen remodel to run $14,000 – $45,000 installed, with smaller kitchens landing at $9,000 – $20,000. That figure includes labor, tear-out, and haul-away, plus a written scope before anything moves. We don’t do same-day kitchen installs, and we won’t pretend to. A kitchen is a scheduled job with permits and inspections.

Call (888) 590-9867

Most Arlington homeowners find us one of two ways: they’re planning a remodel and want to match existing Tamko material still on the house, or a piece has failed and they assume the whole kitchen has to come out. It usually doesn’t. A failed seal, a warped panel, a lifted edge: those are repair decisions, not remodel decisions. We’re an independent contractor, not affiliated with Tamko, so we can tell you honestly which path your kitchen actually needs.

Key Takeaways

  • Full kitchen remodel in Arlington: $14,000 – $45,000 installed; small kitchens $9,000 – $20,000.
  • Cabinet installation alone runs $4,000 – $13,000; countertops $2,000 – $6,500.
  • Every Tamko match is confirmed against the label or measured on site before we order.
  • Every eligible job gets permits pulled and inspections signed.
  • Every price change arrives as a written change order before work starts.

Which Tamko Models This Applies To

Tamko makes a broad range of building products, and kitchen work touches the ones that live in walls, under floors, and around the wet zones. The compatibility question that trips people up most often is matching an existing product to its series line so a new piece sits flush with what’s already installed. Tamko’s product families aren’t interchangeable across lines, and a piece that looks close at the lumberyard can be off by enough to leave a visible seam or a gap that won’t seal.

Here’s how we identify the right part for your home. First, look for the label. Tamko prints the product line and specification on the original packaging, the carton band, or the printed face of the material. If that’s gone, we measure. We measure the actual installed dimensions plus the surrounding clearances, and we compare against the current spec sheet before we order anything. That step alone prevents most of the mismatch headaches we see in Arlington homes where a previous contractor “eyeballed” the replacement.

On the OEM-versus-aftermarket call: for exposed or load-bearing kitchen components, the OEM match is the safer route because the dimensional tolerances are known and tested against the Tamko system. For concealed or non-structural pieces, a quality aftermarket equivalent can save money without compromising the install. We’ll tell you which category your part falls into before you spend a dollar. Some Arlington kitchens need only a few pieces; others need a full rework once we open the wall and see what’s behind it.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tamko Kitchen Remodeling Is Failing

The symptoms below are the ones we see most in Arlington kitchens. Each one points to a different root cause, and each one has a different fix.

  • Lifting or curling edges on floor or wall panels. This usually means moisture has gotten behind the material. In Arlington’s humid summers and shifting clay soils, a small gap at a seam is enough to let water in and start the process.
  • Visible seam separation between existing and matched pieces. The most common cause is a piece installed from a different Tamko series line. The dimensions are close but not identical, and the seam opens under seasonal expansion.
  • Soft or spongy spots underfoot in the kitchen floor zone. That points to subfloor moisture, not the surface material. The surface is just the messenger. We check the subfloor before we quote a replacement.
  • Discoloration or staining that won’t clean out. Surface staining that returns after cleaning usually means moisture is wicking from behind. Cleaning the face won’t fix it because the source is on the back side.
  • Warping around sinks, dishwashers, or the wet wall. This is the classic slow leak signature. A pinhole supply line or a failing drain gasket puts water where it shouldn’t be, and the Tamko material absorbs or deforms before you notice a puddle.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s the line-item pricing for Arlington kitchens. Every range below is installed: parts, labor, tear-out, and haul-away.

Work Installed Range (Arlington)
Full Kitchen Remodel $14,000 – $45,000
Small Kitchen Remodel $9,000 – $20,000
Cabinet Installation $4,000 – $13,000
Countertop Installation $2,000 – $6,500
Backsplash Installation $800 – $2,500
Kitchen Island Installation $3,000 – $10,000

What drives the range: square footage, whether the layout moves, whether the wall behind the Tamko product shows damage once it opens, and the material grade you choose. We use KraftMaid cabinetry and Cambria or Silestone counters when those fit the budget. Parts are itemized separately from labor, so you can see exactly what each piece costs. Every change order comes in writing before the work moves. Every completed job is backed by our written 90-Day Done Right Promise. Call (888) 590-9867 for an exact quote. Estimates are free, and a live person answers the phone around the clock.

DIY or Call Us?

Some things you can safely check yourself. Look at the label on your existing Tamko material, measure the installed piece, and photograph any lifted edge or soft spot. Those three things tell us most of what we need on the phone. What you shouldn’t do is pull a countertop, cut into a wet wall, or try to force a mismatched piece into a seam that’s already tight. Kitchen work touches plumbing and sometimes electrical, and a supply line that’s been quietly failing for a year is a real hazard once it’s disturbed.

Where DIY goes wrong most often: a homeowner orders a replacement from a big-box store that’s close to the original, then can’t get it to seal because the dimensional tolerance is off by 1/8 inch. That’s not a skill problem, it’s a spec problem. Call us before you order the part, not after. (888) 590-9867 is answered by a live person every hour of every day.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch