Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Windows & Doors: The Arlington Owner’s Guide
If you have a failing Tamko window or patio door in Arlington, we replace and repair them at an installed price of roughly $450 to $1,200 per opening for repair work and $4,500 to $15,000 for a full home window replacement, and most non-emergency jobs are scheduled within about a week of your free estimate rather than same-day. Tamko is best known for roofing, but the company’s window and door lines – vinyl new-construction and replacement units sold through building supply yards across North Texas – show up on a lot of Arlington homes built or renovated in the 2000s.
Owners usually find the failure the same way. A bedroom window that used to slide easy now drags, or a patio door that sealed fine last spring won’t latch by July. Sometimes it’s fog between the panes. Sometimes it’s a crack in the corner of the vinyl frame after a hail storm rolled through. You notice it one hot afternoon and then you can’t stop noticing it.
Which Tamko Models This Applies To
Tamko’s window and door business ran largely through its vinyl window lines and component supply, so the parts picture depends entirely on which frame family is on your house. The most reliable way to identify yours is to find the manufacturer label tucked in the head jamb – the top of the frame – or in the sash channel. That label carries the series designation and the glass package info. Write it down before you call anyone, including us. If the label is gone, measure the rough opening and the visible glass width, and photograph the corner weld and the lock hardware; a supply house can often match from those three things.
Here’s the gotcha most Arlington homeowners don’t know: Tamko’s window line was discontinued and sold off years ago, which means true OEM parts for many of those frames are no longer manufactured. What you’ll find instead are compatible replacements – sash balances, tilt latches, screen frames, weatherstrip – made to the same dimensions by aftermarket suppliers. A quality aftermarket balance that matches the original stamp number will outlast the window it’s going into. A cheap one won’t. We source by matching the original part number and dimensions, not by grabbing whatever’s on a shelf.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Windows & Doors Is Failing
- Fog or condensation between the panes. The insulated glass unit’s seal has failed, letting moisture into the argon gap. This is a glass replacement, not a whole-window replacement, in most cases.
- The sash won’t stay up, or drops when you let go. The spiral or block-and-tackle balance has worn out. In a double-hung, a failed balance is also a safety concern – a heavy sash can fall on hands or a child.
- The window won’t latch or lock squarely. Usually a shifted sash from a worn balance or a frame that’s racked, common on west-facing walls that take the full Arlington afternoon sun.
- Drafts or daylight at the frame edge. The weatherstrip or the perimeter seal has broken down. Texas heat cooks foam and vinyl gaskets faster than most of the country sees.
- Cracks at the corner welds or a warped frame. Vinyl frames in North Texas take 100-degree summers and hail. Once a weld cracks or the frame bows, the window no longer seals, and frame-level failure usually means replacement rather than repair.
Replacement Cost & What’s Included
Full window replacement across an Arlington home runs $4,500 to $15,000, and impact-rated window installation – worth considering given the hail this part of Tarrant County gets – runs $8,000 to $25,000. Individual window repair, like a balance swap or a fogged glass unit, sits at the low end of that first range, and we quote it line by line: part, labor, and disposal shown separately, with the written change order in hand before anything moves.
What drives the range is opening count, frame condition, glass package, and whether the installation is a pocket replacement or a full-frame tear-out. Every job we do gets the workmanship backed by our written 90-Day Done Right Promise. We’re an independent contractor and not affiliated with Tamko – we source compatible parts and can recommend current window brands like Andersen and Marvin if your frame is past saving.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some things you can safely check yourself. Look for the label. Test the balance by lifting the sash halfway and letting go gently. Clean and re-lubricate the tracks with a silicone spray, not oil. Feel for drafts around the frame on a windy day. That’s the honest limit.
Where DIY goes wrong is the sash itself. A failed balance on a double-hung window means a heavy pane of glass hanging on a tired mechanism – and if you pull the sash out to swap it and it slips, that’s a hand injury or a broken window. Glass unit replacement requires breaking the factory seal correctly and reseating a new IGU, which isn’t a Saturday project. Call (888) 590-9867 and we’ll tell you straight whether it’s a repair or a replacement.
FAQs
Expect 15 to 20 years on a vinyl Tamko window in North Texas – shorter than the national average because of our heat and hail. Seal failures on the glass unit often show up first, around year 10 to 15.
Often yes. A fogged glass unit, a worn balance, a failed lock or weatherstrip is a repair, not a replacement. Frame cracks and warped vinyl usually mean the window itself needs to come out. We’ll tell you which one you’re looking at during the free estimate.
A single window repair is typically a couple of hours. A full-home window replacement runs one to three days depending on opening count and whether we’re doing full-frame tear-outs. You’ll have a written schedule before we start.
By original part number and measured dimensions, from suppliers who carry compatible aftermarket components for discontinued lines like Tamko’s. We don’t stock parts on a truck, and we don’t guess at matches – if we can’t confirm the fit, we’ll tell you before you spend a dollar.
Why Arlington Homeowners Call Barrett & Sons
Barrett & Sons Construction has been owner-operated since 1998, and Tom Barrett and his sons run the crews – you’re not getting a stranger in an unmarked van. Every scope and allowance arrives in writing, every eligible job gets permits pulled and inspections signed, and every price change shows up as a written change order before work starts. Calls are answered by a live person 24/7. We publish Tom’s name, address, and license number so you can look it up yourself. And we hold to the L.O.C.A.L. values – local roots, on time, community first, accountable, loyal.
We also service KraftMaid, Cambria, and Silestone if your project reaches beyond the windows.
If your Tamko window or door is failing, the free estimate starts with a phone call. Reach us at (888) 590-9867 for upfront pricing, a written scope, and a crew that answers its own phone. We also offer $40 Off Any Repair Over $200, Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and a permanent 10% Senior & Veteran discount.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.