Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Techo-Bloc Fence Installation: The Arlington Owner’s Guide
Techo-Bloc fence installation in Arlington typically runs $3,500 – $9,000 installed, and most projects are scheduled within a few weeks of the estimate, not same-day. You’ll know something’s wrong when a post leans after a heavy rain, a panel rocks in the wind, or the cap on a pillar starts working loose. Around Arlington, that usually traces back to a footing set too shallow for our black clay, or a base that wasn’t compacted in lifts. Call us at (888) 590-9867 and we’ll come look at what’s actually failing.
Which Techo-Bloc Models This Applies To
Techo-Bloc makes fence systems and the pillars, caps, and posts that go with them, and the compatibility questions we field most in Arlington come from the pillar and post lineup and the modular wall block used for fence columns. The brand’s block comes in fixed heights and lengths, so a replacement piece has to match the exact profile, or the mortar line shows and the cap won’t seat. Before you order anything, measure the face of the block and the height of the column, and look for a mold stamp or a sticker on the underside of a cap. We’re an independent service provider, not affiliated with Techo-Bloc, so if the stamp is gone we’ll identify it by profile.
OEM Techo-Bloc block gives you an exact color and dimension match, which matters most on a visible fence line. A quality aftermarket equivalent is fine for hidden structural work like a footing base, but it will read differently in sunlight over time. We source from suppliers who stock the current profiles and confirm the match before we set a single block.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Techo-Bloc Fence Installation Is Failing
Here’s what we see when we get out to look, and what’s usually underneath it:
- A leaning or tilted post. The footing was set too shallow for North Texas clay, which swells and shrinks with every wet and dry cycle and walks the post out of plumb.
- Panels that rock or rattle in wind. Base material wasn’t compacted in thin lifts, so the whole section settles unevenly and works itself loose.
- Loose or cracked pillar caps. Adhesive failed or the cap wasn’t seated flat, letting water in where the freeze in a January cold snap can pop it.
- Washed-out or hollow-sounding base. Poor drainage and no gravel layer behind the footing means runoff digs out the soil supporting the column.
- Chipped corners or joint gaps widening. The wrong block profile was substituted, so mortar lines never fully closed and summer heat opens them further.
Two or more of these together usually mean the footing or base is the problem, not the block itself. That’s a repair we can quote honestly once we see it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed Techo-Bloc fence work in Arlington runs $3,500 – $9,000 for a typical residential job, and a targeted repair or reset sits at the low end of that range. What moves the number: linear feet, number of columns and caps, how much footing has to be dug out and redone, and whether the block profile is still stocked or has to be special-ordered. We quote parts and labor as separate line items so you can see exactly what the block costs and what the install costs.
Every scope and every price change arrives as a written change order before work happens, so there’s no surprise invoice at the end. The finished work carries our written 90-Day Done Right Promise. Call (888) 590-9867 for a free estimate, and if you already have a quote in hand, we’ll give you a free second opinion on it.
DIY or Call Us?
You can safely check plenty yourself: look for the lean with a 4-foot level, tap the base to hear if it’s hollow, and photograph any mold stamp so we can match the block. Where it goes wrong for this job is the footing and base: digging out a set column, getting compaction right in our clay, and resetting block to the correct height so caps seat flat. Do that by hand without the right base and drainage and you’ll be redoing it after the next wet season. A footing is heavy work with real injury risk from a shifting column, so this is where a crew earns its keep. Call (888) 590-9867 and we’ll tell you straight whether it’s a repair or a rebuild.
FAQs
A properly footed Techo-Bloc fence should hold up for decades, but in Arlington’s clay the footing and base are what fail first, often within 5 to 10 years if they were set shallow. The block itself outlasts the install under it.
Often yes. A single leaning column or a set of loose caps can be dug out, re-based, and reset, which keeps most repairs near the low end of the $3,500 – $9,000 range.
Most single-column resets are a one-day job, while a full fence section runs a few days depending on linear feet and how much footing is redone. We schedule a few weeks out, not same-day.
We match by profile and mold stamp, then confirm stock with suppliers who carry current Techo-Bloc profiles before we order. No guesswork and no substitutions without your written sign-off.
If you’re weighing other premium materials too, we also work with KraftMaid, Cambria, and Silestone, and our crews have up to 28 years of experience.
Call Barrett & Sons Construction Arlington at (888) 590-9867 for a free estimate on your Techo-Bloc fence work in Arlington. A live person answers, day or night, and we’ll put the scope and price in writing before anything starts.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.