Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Techo-Bloc Home Additions & ADU: The Arlington Owner’s Guide
If you’re planning a Techo-Bloc home addition or ADU in Arlington, expect to pay roughly $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU, priced with a written, line-item scope before work starts. Smaller projects sit lower on that range: a garage conversion runs $30,000 – $80,000. Techo-Bloc itself doesn’t make wall systems or framing, so the brand enters your project through the hardscape and veneer work at the base, walkways, patios, and retaining walls that anchor the structure. Owners usually discover a problem here in one of two ways: a paver apron starts settling away from the slab, or the segmental retaining wall behind the addition begins to lean after a run of North Texas clay movement. This guide is for Arlington homeowners who already know the plan and want the installation done to spec, with the right materials and the permits pulled.
Which Techo-Bloc Models This Applies To
Techo-Bloc hardscape products most often tied to an Arlington addition or ADU include the Blu 60mm and Villagio 60mm pavers for patios and walkways, Victory and Semma wall blocks for retaining and planter walls, and the Para and Mini-Creta lines for architectural wall faces and steps. Each line has a fixed height and a specific unit footprint, and the failure you’re chasing usually traces back to a unit of the wrong height boxed in during a prior install, or a retaining wall built without the correct geogrid setback. To identify what you have, measure the exposed face height and the unit width in inches and compare against the published spec sheet; that tells you whether a repair can reuse the existing course or has to rebuild a full run. On the OEM question: Techo-Bloc units aren’t interchangeable across series, so a matching-cast aftermarket block rarely seats cleanly against the original. We specify the correct Techo-Bloc series for your wall and paver field and confirm the model before ordering. We’re an independent installer and not affiliated with Techo-Bloc.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Techo-Bloc Home Additions & ADU Is Failing
- Pavers settling or rocking at the addition’s edge. The base wasn’t compacted to depth or the subgrade is clay that swells after rain, so units shift and the joint sand washes out. In Arlington, we see this most on south-facing aprons that bake all summer and take runoff hard in spring.
- Retaining wall leaning outward. The wall was built without geogrid or a proper gravel drainage column, so hydrostatic pressure from trapped water pushes the face forward. A lean beyond a couple of degrees means the base course needs rebuilding, not just re-stacking.
- Wall units cracking or spalling at the face. Freeze-thaw cycles in DFW are mild but real, and a block that absorbed water before sealing can pop its face over a few winters. Spalling near the top course usually points to a missing cap or a drainage gap.
- Steps and stoops pulling away from the slab. The Techo-Bloc step treads were set on a base that wasn’t tied into the foundation, so seasonal movement opens a joint. This is a trip hazard and the first thing an inspector flags.
- Efflorescence or white haze that won’t wash off. Mineral salts migrating through the block mean water is getting in behind the wall and staying there. Left alone, this is the same moisture that undermines the wall base.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For an Arlington Techo-Bloc home addition or ADU hardscape scope, plan on the $45,000 – $130,000 addition range or the $90,000 – $220,000 ADU range, with the hardscape portion (paver fields, retaining walls, steps, veneer) quoted as its own line so you can see exactly what the Techo-Bloc material and labor cost. A retaining wall rebuild, paver replacement, or step re-set typically falls within that overall scope and gets priced separately from framing and finish. What drives the range: wall length and height, soil conditions in your part of Arlington, whether geogrid and drainage are added, and paver pattern complexity. We quote parts and labor transparently, in writing, with every allowance on the page. Any price change comes as a written change order before work happens, because the allowance that isn’t on paper is a surprise waiting for a date. Every completed job carries the written 90-Day Done Right Promise – if it’s not done right, one call brings Tom back.
DIY or Call Us?
Some checks are safe and smart to do yourself: measure the paver or block face, photograph the lean or crack, note where water pools after a storm, and pull your plat to see the setback rules for an Arlington addition or ADU. Where DIY goes wrong is the rebuild. Retaining walls and addition bases carry real loads, and a wall that fails under a structure is a serious safety and permit problem, not a cosmetic one. Lifting and resetting segmental units by hand can pinch or crush, and doing it without geogrid and drainage just resets the same failure. We handle the structural and hardscape work, pull the permits, and get inspections signed. If you’re not sure whether it’s a repair or a rebuild, call (888) 590-9867 and we’ll tell you straight.
FAQs
A properly built Techo-Bloc paver field or retaining wall lasts 25 to 50 years when set on a correct compacted base with drainage; the material itself is durable, and the base is what fails first. Arlington’s expansive clay soil is the main variable – walls without geogrid and a gravel drainage column tend to lean within 5 to 10 years. Call (888) 590-9867 for an exact quote – estimates are free.
Often yes: a settled paver field can usually be lifted, re-graded, and re-set, and a mildly leaning wall can sometimes be rebuilt from the base course up rather than replaced entirely. If the lean is past a few degrees or the base is saturated, a full rebuild is the honest answer. We’ll inspect and tell you which one you’re facing – call (888) 590-9867 to schedule it.
A paver apron reset or a short wall rebuild typically runs 2 to 5 days once materials are on site; a full hardscape scope that surrounds a new addition takes longer and gets scheduled to the build. It’s planned work, not an emergency, so we give you a written timeline up front. Call (888) 590-9867 for a free estimate.
We match your existing series by measuring height and width against the published Techo-Bloc spec and confirm the model before ordering, then order the correct units through the brand’s supply chain. We don’t claim to stock parts or carry them on a truck – it’s specified and ordered to fit your job. We also install KraftMaid, Cambria, and Silestone on the interior side of the same projects. Call (888) 590-9867 to get your scope priced in writing.
An Arlington addition or ADU starts with getting the ground under it right – the Techo-Bloc walls and paver work that hold the grade and carry the look. Barrett & Sons Construction Arlington has been owner-operated since 1998, every eligible job gets the permits pulled and inspections signed, and our crews have up to 28 years of experience on hardscape and build work. You’ll get a written, line-item estimate with no surprises, a live person answers the phone 24 hours a day, and today’s standing offers include a free second opinion on any written estimate and a permanent 10% senior and veteran discount. Call (888) 590-9867 to schedule your free estimate.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.