Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Techo-Bloc Roofing: The Arlington Owner’s Guide
We install and repair Techo-Bloc-compatible roofing in Arlington, and a typical installed repair runs $400 – $1,800, while a full roof replacement lands between $8,000 and $20,000 depending on pitch, square footage, and tear-off. Most Arlington homeowners don’t go looking for a roofing part until something already went wrong – a ceiling stain after a spring hail storm, a shingle flap flapping in a south wind off the Trinity, or a roofer pointing at exposed underlayment near a valley. That’s when the questions start: what actually failed, what does it cost, and can it be fixed without tearing off the whole roof.
Which Techo-Bloc Models This Applies To
A quick note first: Barrett & Sons Construction Arlington is an independent service provider and is not affiliated with Techo-Bloc. That independence is exactly why we can tell you straight what fits your roof and what doesn’t.
Techo-Bloc is best known for its hardscape lines – the Borealis, Blu, and Para paver families, plus retaining wall block – and many Arlington properties carry those in the driveway or patio. On the roofing side, Techo-Bloc products show up as specialty accent pieces: ridge cap, accent trim, and profile-matched trim on mixed-material homes. When we source a match, we start with the label inside the carton or the stamped mark on the back of the piece. The manufacturing lot code matters more than the color name, because a “Charcoal” from a 2019 run isn’t a guaranteed match to today’s Charcoal. Pull the old piece, measure the length, width, and thickness to the sixteenth of an inch, and write the model number down. If the label is gone, we bring a sample to the supplier and match by profile, not by photo.
On the OEM-versus-aftermarket question: for a cosmetic accent piece, a quality aftermarket equivalent in the same profile and thickness will perform fine and saves money. For anything structural – flashing, valley metal, ridge anchoring – stick with the specified part. The underlayment is where people cut corners and regret it; Arlington’s summer heat cooks a cheap underlayment into brittle paper in a few seasons.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Techo-Bloc Roofing Is Failing
- Curling or lifted edges on accent pieces. This usually means the fasteners backed out as the deck expanded and contracted through Arlington’s 100-degree summers.
- Granule loss in the gutters. A pile of grit after a rain is normal in small amounts and a sign of an aged shingle or accent piece running out of life in larger amounts.
- Water staining on the ceiling or in the attic sheathing. A stain rarely means the piece failed alone – it usually means the flashing or underlayment let go underneath it.
- Rust streaks down a valley or ridge. Corroded fasteners and valley metal tell you the assembly is older than it looks from the ground.
- Visible sag or soft spots underfoot. A spongy deck points to moisture damage in the sheathing, which has to be addressed before any new piece goes on top.
One honest safety note before you climb up there: roofing is steep, hot work, and a fall from a single-story roof in Arlington can put you in the hospital. Checking from a ladder with your feet on the ground is fine. Walking the pitch is a job for crews who do it every week with the right footing and harnesses.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what roofing runs in Arlington, priced so you can see parts and labor as one number rather than a mystery:
| Job | Installed Price Range (Arlington) |
|---|---|
| Targeted roof repair (accent piece, flashing, small section) | $400 – $1,800 |
| Tile roof repair | $600 – $2,500 |
| Full roof replacement | $8,000 – $20,000 |
| Metal roof installation | $15,000 – $40,000 |
What drives the range: roof pitch and access, square footage, how much old material has to come off, whether sheathing is soft, and whether any accent profiles are special order. Replacement price includes tear-off, underlayment, the roofing material, fasteners, and cleanup. Any change in scope – say a roofer finds rot at the deck – arrives as a written change order before work moves forward. No surprise invoices at the end. Every eligible job gets permits pulled and inspections signed, and every completed job carries the written 90-Day Done Right Promise.
DIY or Call Us?
You can safely check some things yourself: look at the ceiling and attic sheathing for stains after a hard Arlington rain, check the gutters for granule piles, and eyeball the roofline from the ground for sag or lifted pieces. What goes wrong when owners take it further – and we’ve seen it – is nailing a new piece over a soft deck that needed replacing, missing a flashing detail so the leak comes right back, or climbing a steep pitch without harness or help. The mistakes usually cost more to fix than the original repair would have.
If you’re standing under a stain right now, call us at (888) 590-9867 and we’ll come walk the roof, price it honestly, and tell you whether it’s a repair or a replacement – the free estimate is the whole ask. Want a second opinion first? That’s free too.
FAQs
Expect 15 to 25 years for accent and shingle-style profiles under decent conditions, though Arlington’s hail and 100-degree summers tend to knock that toward the shorter end. The underlayment and flashing usually decide the real lifespan, not the surface piece. Call (888) 590-9867 for a free estimate on yours.
Often yes – a single failed accent piece, a flashing detail, or a small valley section is a repair in the $400 – $1,800 range. Once you’re past roughly a quarter of the roof or the deck is soft underneath, replacement pencils out better. We’ll tell you straight which side of that line you’re on, with a free estimate.
A targeted repair or single-part swap is typically a half-day to a full day, while a full replacement on a typical Arlington home runs one to three days depending on square footage and weather. We give you a written schedule before we start. Call for a free estimate and a realistic date.
We match by manufacturing lot code and physical measurement – length, width, and thickness – plus profile, not by a photo or a color name. If the label is gone, we bring a sample to the supplier and confirm before ordering. Call (888) 590-9867 and we’ll get the right part on the job.
We also service companion hardscape and interior brands on the same property, including KraftMaid, Cambria, and Silestone, so the details coordinate across a full project. Our technicians have up to 28 years of experience, and with 29 years and counting on the Barrett & Sons name – founded in 1998, owner-operated from day one – you get crews whose work stands up. Call (888) 590-9867 for a free estimate on your Techo-Bloc roofing, and while you’re at it, mention the $40 Off Any Repair Over $200 offer or the permanent 10% Senior & Veteran discount; no trip charge inside the county.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.