Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Bathroom Remodeling: The Arlington Owner’s Guide
Therma-Tru bathroom remodeling in Arlington runs $9,000 to $28,000 installed, and most projects that involve a failing door system can be scheduled within the same week. The most common call we get in Arlington is from a homeowner whose Therma-Tru exterior bathroom door or interior entry door has started to stick, swell at the bottom, or let water in around the frame after years of Texas heat cycling. In our experience, the door is rarely the whole story: moisture has usually found the subfloor or the wall cavity behind it. That’s when a parts question turns into a remodeling conversation. Our technicians have up to 28 years of experience diagnosing exactly that.
Which Therma-Tru Models This Applies To
Therma-Tru makes fiberglass and steel entry doors, patio doors, and the FramSaver and Slim-Line series that show up in a lot of Arlington bathrooms opening onto a pool deck, back patio, or side yard. Interior bathroom doors in Therma-Tru’s catalog are typically the Smooth-Star or Classic-Craft lines, and each line has its own slab thickness (1-3/4-inch standard, 1-3/8-inch on some interior models), hinge pattern, and sill profile. The compatibility gotcha we see most: a homeowner orders a replacement slab or frame kit based on the door’s visible style, but the brickmould and sill configuration on their 1990s-era foundation doesn’t match the current part number. Measured opening width, height, and the depth of the rough opening matter more than the catalog photo. We measure the actual opening in the wall, not the door, before we quote a single line item. We’re an independent service provider and not affiliated with Therma-Tru, but we know the product line well enough to source the right slab and frame for your specific Arlington home rather than forcing a close-enough fit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Bathroom Remodeling Is Failing
- The door sticks or drags at the bottom in summer. That’s almost always moisture absorption and wood swelling in the frame or jamb, not a hinge problem. In Arlington’s humidity, the bottom rail is where it starts.
- Water stains or soft spots near the threshold. The sill pan or the flashing behind the exterior door has failed, and water is getting into the wall cavity. Left long enough, this rots the subfloor under the bathroom tile.
- The door won’t latch cleanly. Strike-plate misalignment from a settled frame, common on slab foundations after a dry summer. It reads as a hardware issue but usually starts with the opening shifting.
- Condensation or fogging on the glass panel. The insulated glass unit’s seal has failed. This is a parts problem with a clear replacement path, but the surrounding frame and trim deserve a look too.
- Visible cracks at the frame corners or caulk pulling away. Movement in the wall or a failed sealant joint. In Arlington, we see it most on doors facing west that take the full afternoon sun.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full bathroom remodel in Arlington with a Therma-Tru-compatible door replacement built into the scope, homeowners typically spend $9,000 to $28,000 installed. A smaller bathroom remodel that focuses on the door system, trim, and surrounding wall repair runs $5,000 to $12,000. A standalone exterior door replacement with the right slab and frame sits at the lower end of that first range. Cost drivers: whether the rough opening needs reframing, whether water damage reached the subfloor, whether the brickmould and casing get replaced or reused, and whether the glass spec changes to low-E for sun exposure. Every line item, allowance, and price change arrives in writing before the work starts. The finished job carries our 90-Day Done Right Promise, written on the contract.
DIY or Call Us?
You can safely check a few things: run a level across the door head and the threshold, look for daylight around the frame, test the latch, and press on the bottom rail to feel for softness. What you shouldn’t do yourself is reframe a rough opening, replace a sill pan, or tear into a wall cavity to chase water damage. That’s where DIY goes wrong: a mis-set frame leaks again in one Arlington rainy season, and a water-damaged subfloor you didn’t catch becomes a tile job. If you’ve found soft wood or signs of moisture, stop and get it looked at. Call (888) 590-9867 for a free estimate, and we’ll tell you plainly whether you’re looking at a door swap or a bigger repair.
FAQs
How long does a Therma-Tru door last in Arlington weather? A fiberglass Therma-Tru exterior door typically lasts 15 to 20 years in North Texas, but the frame, sealant, and flashing around it usually need attention sooner, around year 8 to 12. The door outlasts the installation details around it. Call (888) 590-9867 for an exact quote on your door – estimates are free.
Can the failing part be repaired instead of replaced? Sometimes. A sticking door from a settled frame can often be adjusted and resealed without a new slab. A failed glass seal or a rotted sill pan usually means replacement. We’ll tell you which one you’re facing after we look at it. Call (888) 590-9867 to schedule a free estimate.
How long does the swap take? A straightforward door and frame replacement takes one day. If water damage reached the subfloor or the rough opening needs reframing, plan on two to three days, with the tile and trim work factored in. Call (888) 590-9867 and we’ll give you a written schedule before we start.
How do you source the right Therma-Tru part? We measure the actual rough opening, check the slab thickness, hinge pattern, and sill profile, and match those specs to the correct part number rather than going off the door’s visible style. That’s the step that prevents the wrong-slab problem. Call (888) 590-9867 for a free estimate, and if we need to bring in KraftMaid, Cambria, or Silestone for the rest of the bathroom, we’ll quote those in writing too.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.