Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Driveway & Pavers: The Arlington Owner’s Guide
We replace and repair the Therma-Tru entry system components that sit at the transition between a driveway, porch, or paver apron and a Therma-Tru door – and a full paver driveway or approach rebuild in Arlington typically runs $7,000-$18,000 installed, with concrete at $4,500-$12,000 and asphalt at $3,500-$9,000. Most Arlington owners don’t discover the problem on the driveway itself. They find it at the threshold: a Therma-Tru door that sticks, rubs, or drags in spring, or water creeping under the sill after a storm. The culprit is usually a settled approach, a failed joint at the paver apron, or a sill that no longer sits flush because the hardscape underneath it moved.
Which Therma-Tru Models This Applies To
Therma-Tru builds a wide catalog – Fiber-Classic, Smooth-Star, Benchmark, and the entry systems sold through big-box stores – and the parts that interface with a driveway or paver approach differ because the sill and threshold dimensions differ. A Smooth-Star door has a narrower sill profile than a Fiber-Classic in many configurations, and that matters: if the paver apron or porch step doesn’t meet the door at the right height and pitch, you’ll get water intrusion no matter how good the door itself is.
To identify what you have, look for the manufacturer’s label on the door edge, usually on the hinge side jamb. The label lists the model line and the rough-opening dimensions. Measure the threshold width and the height of the sill above the finished hardscape. A Therma-Tru sill sitting more than roughly 1/4 inch proud of the paver surface, or pitched back toward the house, is the compatibility issue we see most in Arlington.
On OEM versus aftermarket: for the metal and composite parts (sill extensions, threshold adapters, sill pans), Therma-Tru-brand replacements fit the door correctly every time. For the hardscape itself – the pavers, the base, the concrete – there is no “Therma-Tru part.” The work is a proper paver or concrete approach, and any brand that meets Texas spec will do. That distinction matters when you’re pricing this out.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Driveway & Pavers Is Failing
- Door sticks or drags only in wet weather. That’s a sign the base under the hardscape is moving. Saturated soil in a North Texas spring causes the pavers or concrete to heave, and the door frame follows it.
- Water pooling at the Therma-Tru threshold after storms. The apron has settled or lost its slope. Arlington’s heavy spring rain events expose this faster than anything else.
- Visible cracks or joint gaps at the paver apron. If the joint between the driveway and the door apron opens more than about 3/8 inch, the sand is washing out and the pavers are shifting.
- Rot or softness at the sill or bottom of the frame. Water has been sitting against the door base. By the time you feel soft wood, the damage has usually been going on for a couple of seasons.
- A dip or low spot in the approach directly in front of the door. This is the most expensive symptom to ignore because it sends every rainstorm against the door rather than away from it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Arlington homeowners actually pay, parts and labor together, and what the numbers cover:
| Work | Installed price range |
|---|---|
| Paver driveway installation | $7,000-$18,000 |
| Driveway replacement | $5,000-$14,000 |
| Concrete driveway installation | $4,500-$12,000 |
| Asphalt driveway paving | $3,500-$9,000 |
| Driveway sealing (existing) | $250-$700 |
What pushes the number toward the top of the range: tear-out of existing concrete, a base rebuild, pavers rated for high traffic, and a threshold retrofit that has to match a specific Therma-Tru sill profile. What keeps it low: sealing an existing sound driveway, or a straightforward replacement with no base work.
Every price change – a pump truck, a layer of base that turns out to be bad – arrives as a written change order before work resumes. The permit gets pulled and the inspector signs off, because that inspection is one more set of eyes on a job we’d rather catch early. Every job is backed by our 90-Day Done Right Promise: if it’s not right, call and Tom comes back.
DIY or Call Us?
You can safely handle a few things here. Walk the apron after rain and note where water pools. Push a screwdriver into the sill wood to check for softness. Photograph any joint gaps against a tape measure. That’s information a qualified installer can use, and it costs you nothing to gather.
Where it goes wrong: rebasing or re-grading a paver approach is not a weekend job, and a paver apron rebuilt to the wrong slope makes the door problem worse. A 1/8-inch error in fall can put water against the threshold for years. On the door side – if the sill pan or threshold adapter is compromised – you’re looking at a door-out-of-frame job, not a quick swap.
Call us at (888) 590-9867 for a free estimate. We’ll look at the threshold, the paver face, and the ground under it, and quote the whole job in writing before we start. Free second opinion on any estimate you’ve already got.
FAQs
The door itself typically runs 20-30 years if the threshold stays sound. The failure point in North Texas is the hardscape base: our shrink-swell clay soils move seasonally, and an apron without a proper 4-6 inch compacted base and correct slope will shift inside 5-8 years. The door outlives the driveway under it if the base is done right.
Often yes. If the movement is localized – a settled apron, a washed-out joint, a low spot in front of the door – a targeted repair can fix the threshold in a fraction of the cost of a full replacement. If the base is bad across the whole driveway, a repair just delays the problem. Call (888) 590-9867 and we’ll tell you which one you’re dealing with, honestly.
A paver apron and threshold repair is usually a 2-3 day job. A full paver driveway installation or replacement typically runs 4-7 days, depending on size, base condition, and whether tear-out is involved. The Therma-Tru sill and threshold work happens early so the rest of the hardscape can tie into it.
Through the manufacturer channel, matched to the model line and rough-opening dimensions on your door’s label. We don’t guess at parts and we don’t carry stock on a truck; the part is ordered to your door’s spec. That’s why we ask for the label photo up front – it saves a second trip and a wrong-fit part.
We also handle KraftMaid, Cambria, and Silestone work, but our focus for this job is the door apron and driveway integration.
Barrett & Sons Construction Arlington is an independent local contractor, not affiliated with Therma-Tru. If you’re in Arlington or the nearby counties and your Therma-Tru door has started fighting with the driveway under it, call us at (888) 590-9867 for a free estimate. Live person answers, day or night – no voicemail, no out-of-state call center. We’ll look at it, tell you what we find, and put the numbers in writing. No trip charge inside the county, and senior and veteran households take 10% off, always.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.