Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Home Additions & ADU: The Arlington Owner’s Guide
We build home additions and ADUs in Arlington with Therma-Tru exterior door packages spec’d into the plan, and a finished addition runs $45,000 – $130,000 depending on size, foundation, and how much exterior door and sidelite work the plan includes. ADUs land higher, at $90,000 – $220,000. This is planned construction, not emergency work, so we schedule it properly rather than pretending a stick-built addition happens overnight.
Owners usually come to us after something else went wrong first. They had a Therma-Tru door or entry system installed in a sunroom or garage conversion, and two or three summers later the door won’t latch, the threshold is holding water, or the finish on a Therma-Tru entry has gone chalky and rough. That’s when they start asking whether the addition itself was built to take a real exterior door, or whether the door was an afterthought bolted onto a wall that moves. In Arlington, clay soil and hundred-degree summers find every weak joint in an addition, and the entry door is usually where the weakness shows first.
To be clear: Barrett & Sons Construction is an independent builder. We’re not affiliated with Therma-Tru.
Which Therma-Tru Models This Applies To
Therma-Tru entry doors turn up in our Arlington addition projects most often as Fiber-Classic and Smooth-Star, with the occasional Classic-Craft on higher-end builds. Fiber-Classic has the wood-grain texture and the classic ovolo sticking; Smooth-Star is flat and smooth, and it’s the one we see most in garage conversions and utility entries where the plan calls for a simple, paintable slab. The two are not interchangeable on a prehung unit, so the first job is identifying what you actually have.
Here’s how to identify it. Pull the door open and look at the hinge jamb, near the top hinge. Therma-Tru puts a label there with the series and the unit size. If the label is gone, measure the slab: width, height, and thickness. Standard is 1-3/4 inches thick, and a 36-inch slab measures a true 35-3/4 inches across. Write those numbers down before you call anyone.
The OEM-versus-aftermarket question matters more here than on most parts. Therma-Tru builds its own sills, sweeps, and hinge systems to its own dimensions, and a generic replacement threshold that “fits a 36-inch door” often doesn’t sit correctly in a Therma-Tru sill pan. We source OEM where the part is structural to the door and a quality equivalent only where it genuinely doesn’t affect the seal. On an addition, the exterior door is the one place in the envelope where a half-inch matters.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Home Additions & ADU Is Failing
Most of what goes wrong with a Therma-Tru entry in an Arlington addition traces back to water, movement, or both. Here’s what to watch for.
- The door won’t latch without a shove. The addition has settled, or the hinge jamb has swelled. In Arlington’s clay, a slab-on-grade addition can move enough in a dry summer to throw a strike plate off by an eighth of an inch, which is all it takes.
- Water in the threshold or a soft spot at the interior corner. The sill pan wasn’t integrated with the addition’s flashing during the build, or the exterior grade has risen against the threshold. Both send water into the wall cavity behind the door frame.
- The bottom sweep is dragging or gone. Sweeps wear out on south- and west-facing entries faster than anywhere else in the house. A worn sweep lets in water, insects, and hot air, and it’s one of the few parts you can reasonably swap yourself.
- The finish is chalky, peeling, or rough to the touch. Texas UV is hard on any painted or stained exterior surface. A Therma-Tru Fiber-Classic that hasn’t been recoated in several years will show it, and once the finish breaks down, the door takes on moisture.
- Daylight visible around the perimeter of a closed door. Weatherstripping has compressed, the door has warped, or the addition’s opening was framed out of square. This one needs a real diagnosis, because swapping the strip won’t fix a racked frame.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For an Arlington addition project, the headline ranges are $45,000 – $130,000 for a home addition and $90,000 – $220,000 for an ADU. A garage conversion sits between them at $30,000 – $80,000, and that’s often where a Therma-Tru entry door enters the picture, since the conversion needs a proper exterior-rated door and a clean threshold detail.
What drives the range: foundation and slab work, framing and roof tie-in, electrical and mechanical runs, insulation and drywall, and the exterior door and window package. A Therma-Tru entry with sidelites and a proper sill pan belongs in the door and window line of the quote, spelled out, not bundled into a lump sum.
Every scope, allowance, and price change comes to you as a written change order before work happens. No surprise invoice at the end. Permits are pulled and inspections signed on every eligible job, and the whole thing carries our 90-Day Done Right Promise in writing. Cabinetry and counters in an addition’s kitchenette are usually KraftMaid and Cambria, with Silestone as an alternate, and we spec brands you can look up.
DIY or Call Us?
You can safely check a lot of this yourself. Look for the Therma-Tru label on the hinge jamb, measure the slab, check the threshold for standing water after a rain, run your hand along the bottom sweep, and look for daylight around a closed door. None of that requires a tool.
Where owners get into trouble: adjusting a hinge or strike plate to compensate for a settled addition, re-caulking a threshold that’s already letting water into the wall, or pulling a door out of a rough opening that wasn’t flashed correctly in the first place. That last one turns a door problem into a framing and water-damage problem fast. On an addition, treating the door as an isolated part is the mistake.
If you’re weighing a repair against a full build, call us at (888) 590-9867. Estimates are free, and the second opinion on a written estimate you already have costs you nothing.
FAQs
Expect 15 to 25 years on the door itself, with the sweep, weatherstripping, and finish needing attention well before that. Therma-Tru’s fiberglass slab holds up well in Texas heat, but the hardware and finish around it are what fail first, and sun exposure on a west-facing entry shortens that timeline.
Often, yes. A dragging sweep, worn weatherstripping, a sticking latch, or a failed finish are all repairable and we do that work. It’s when the frame has racked, the sill pan has failed, or water has reached the sheathing that replacement becomes the honest answer.
A single prehung entry replacement is typically a one-day job, and a garage conversion with a new exterior door and threshold detail runs two to three days once the door is on site. On a full addition, the door install is a scheduled line item in the larger build, not a separate visit.
We match the Therma-Tru series and unit size from the jamb label or slab measurements, then order OEM parts for anything structural to the door and a quality equivalent only where it doesn’t affect the seal. Lead times vary by series. Call (888) 590-9867 and we’ll tell you what we’d need to order for your door.
We’ve been serving local communities for over 29 years, founded in 1998 and owner-operated, with permits pulled and a written promise behind every job. Our technicians have up to 28 years of experience. Arlington homeowners who’ve been quoted one number on the phone and handed another at the door tend to appreciate that. Call (888) 590-9867 for a free estimate, ask about the $40 Off Any Repair Over $200, the Free Second Opinion on Any Written Estimate, no trip charge inside the county, and the permanent 10% Senior & Veteran discount.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.