A Barrett company - serving Arlington, TX
T

Therma-Tru Windows & Doors in Arlington, TX

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Therma-Tru Windows & Doors: The Arlington Owner’s Guide

Barrett & Sons Construction Arlington installs Therma-Tru windows and doors, and we handle the failing parts that come with them: door slabs, sills, sweeps, hinges, weatherstripping, glass units, and hardware. A full Therma-Tru door installation in Arlington runs $4,500 – $15,000 depending on size and glass package; part-level repairs and swaps are quoted per job with parts and labor broken out. We’re an independent service provider, not affiliated with Therma-Tru.

Call (888) 590-9867

Most Arlington owners discover the problem the same way: a door that sticks every July, a fogged glass unit they can’t see through, or weatherstripping hanging off the frame in strips. They call because the door is fine structurally but the part isn’t, and they want it matched to their model, not guessed at.

Which Therma-Tru Models This Applies To

Therma-Tru builds fiberglass and steel entry doors sold under several lines, and the parts don’t swap between them freely. The most common residential lines you’ll find on Arlington homes are the Smooth-Star and Classic-Craft fiberglass doors, the Fiber-Classic series, and the Benchmark and AmericanStyle steel lines. Each uses a different sill system, a different hinge prep, and a different weatherstripping profile. A sweep that fits a Smooth-Star door won’t fit a Benchmark door, and we’ve seen homeowners order the wrong one twice before calling.

The fastest way to identify your door is the label. Therma-Tru puts a sticker on the hinge side of the jamb, usually inside the frame near the top hinge, with the model number and a build date. If the label is painted over or gone, we measure the slab height, width, and thickness, plus the hinge spacing and sill profile, and match from there. On glass, the visible markings in the corner of the unit tell you the manufacturer and the tempered or laminated spec.

On the OEM-versus-aftermarket question: Therma-Tru’s own parts fit exactly and cost more. Quality aftermarket equivalents from established manufacturers often fit the same door at a lower price, and for wear items like sweeps and weatherstripping they perform the same. For structural parts like sills and glass units, we lean OEM unless the match is verified by measurement. We don’t guess, and we don’t carry parts on a truck.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Therma-Tru Windows & Doors Is Failing

Arlington summers push these doors hard. The combination of heat, humidity, and the sun hitting a west-facing entry all afternoon shows up in specific failures:

  • The door sticks or drags in summer. Fiberglass and steel slabs expand in heat, and a swollen or sagging hinge can throw the door out of square. If it only sticks June through September, suspect the hinge or the threshold, not the door itself.
  • Fogging or condensation between the glass panes. That’s a failed seal on the insulated glass unit. The glass hasn’t cracked, but the seal around the perimeter has broken and moisture has worked its way in. The unit needs replacing, not repairing.
  • Weatherstripping peeling or flattened. Texas sun degrades the foam and vinyl strips on a schedule, usually every five to seven years on a sun-exposed door. Once flattened, it stops sealing and you feel air at the frame.
  • Water pooling at the threshold or a rotting sill. The sill is the bottom of the door opening and the first place water sits. A failing sill on a Therma-Tru door often means the sill cap needs replacement before the wood core underneath goes soft.
  • A sweep that’s worn through or missing. The door sweep at the bottom seals against the threshold. When it’s torn or gone, you get drafts, water intrusion, and pests. It’s a cheap part but easy to install wrong.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Arlington, a full Therma-Tru door installation lands between $4,500 and $15,000 depending on door size, glass package, and whether we’re replacing the frame or setting a door into an existing opening. A patio or French door set runs higher within that range. Window replacement with Therma-Tru-compatible units runs $8,000 – $25,000 for impact-rated glass and $4,500 – $15,000 for standard replacement, and part-level repairs like a sweep, sill cap, or weatherstripping are quoted individually with parts and labor listed separately.

What drives the range: door size and material, glass type (impact-rated runs higher), whether the existing frame is sound, and whether the door needs a new threshold. We write the scope, the allowance, and any change order before work starts. Every price change arrives in writing, and the 90-Day Done Right Promise goes on the contract: if it’s not done right, Tom comes back and makes it right.

DIY or Call Us?

You can safely check a few things yourself. Look at the label for the model number. Run a hand along the weatherstripping to feel for gaps. Check whether the door is square by measuring corner to corner. Clean the sill and look for soft wood. Those checks cost nothing and tell you a lot.

Where DIY goes wrong is the glass unit and the sill cap. A failed insulated glass unit has to be matched to the door’s glazing bead and the exact unit size; get it wrong and the new unit won’t seat, or it voids the door’s warranty. A sill cap that’s installed without the right sealant and flashing lets water back in behind the new part, and you’re back to a rotting sill in two years. And on any door with laminated or impact-rated glass, handling a heavy unit alone is a genuine injury risk. For those, call us. We carry the right parts, we install them, and we stand behind the work.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch