A Barrett company - serving Arlington, TX

Toto Construction Service in Arlington, TX

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Arlington Homeowners Choose Toto Construction

We provide independent Toto construction and service work in Arlington, TX – repair, replacement, and remodel integration of Toto toilets, Washlet seats, and hand-wash fixtures. What makes our Toto work different is pattern recognition: we see Drake fill valves, Ultramax II flush towers, and Washlet inlet filters week after week across North Texas, so we can tell you whether a fixture is worth keeping or ready for replacement before we touch it. Barrett & Sons Construction Arlington is an independent service provider and is not affiliated with or authorized by Toto. Call (888) 590-9867 for a free estimate.

Call (888) 590-9867

Why Trust Barrett & Sons Construction Arlington for Your Toto Construction?

Our technicians have up to 28 years of experience, and that time shows up in small places: knowing which Toto fill valve to order for a CST743 Drake versus a CST454 Drake II, and knowing that a Washlet S500e’s pump failure isn’t the same problem as a clogged nozzle on an S550e.

We work with OEM-compatible parts and genuine Toto components wherever the fixture is worth keeping, and we won’t put a $40 aftermarket fill valve in a $600 one-piece toilet just to save a trip. When a part number matters to your warranty, we say so. When a discontinued component makes OEM replacement impossible, we tell you that too, before you spend money chasing it.

Every repair comes with written scope before work starts. If the job turns into something bigger – a cracked bowl on an Ultramax II, a shut-off valve that won’t hold – you get a written change order before we proceed. Every eligible job is permitted and inspected, and every completed job carries our 90-Day Done Right Promise: if it’s not done right, Tom comes back and makes it right, one call.

Arlington is a different market than Fort Worth or Dallas proper. Between the storm-restoration cycles that pull contractors off planned bath work for weeks and the expansive Blackland Prairie clay that cracks slabs through dry-summers-wet-falls, we plan Toto installs around what the floor and the subfloor are actually doing, not just what the spec sheet says.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Toto Construction Problems We Fix in Arlington

  • Fill valve diaphragm wear on Drake and Ultramax II toilets. The rubber diaphragm inside the fill valve stiffens with age and Arlington’s hard water. Symptom: the toilet refills slowly, refills on its own in the middle of the night (ghost flushing), or runs continuously after the flush completes. Left alone, a running fill valve can add real money to a water bill.
  • Flush tower gasket degradation on Drake-series two-piece toilets. The tower assembly’s rubber seal flattens and stops sealing as the toilet ages, letting tank water bleed past into the bowl. Symptom: a faint trickle sound, water level creeping down between flushes, or the toilet running intermittently. Most owners assume fill valve first, but on a CST743 past ten years, it’s often the tower seal.
  • Washlet seat inlet filter and nozzle clogs. Hard water is the enemy of a bidet seat. The inlet screen scales up, spray pressure drops, and the nozzles crust over. On older S500e units, control-panel faults and pump failures eventually join the party. Most “dead Washlet” calls turn out to be a clogged filter or a failed descale, not a dead unit.
  • Washlet control-panel or pump failures on aging S500e and S550e seats. Electronics age differently from plumbing. A unit that sprays fine but throws an error code is usually a sensor or pump issue, and on discontinued models the parts hunt can outlast the value of the repair.
  • Hand-wash faucet aerator and cartridge scale-up on Toto EcoPower and Prominence. Reduced flow, drips at the spout, or a faucet that stops shutting off cleanly. In Arlington, scale builds faster than most owners expect – a quarter-turn cartridge that ran smooth in year one can seize by year five without periodic cleaning.

Toto Parts & Our Repair-vs-Replace Approach

We use genuine Toto fill valves, flush tower gaskets, and Washlet components where the fixture is worth keeping. A Drake or Ultramax II with a solid bowl and sound tank is worth repairing – OEM parts are readily available and the repair is straightforward. We carry nothing in local inventory; every part is sourced to the job, which means the honest question is always “is this fixture worth the parts wait or the parts cost?”

For out-of-production Washlet electronics, or older one-piece toilets with cracked bowls or cracked tanks, the honest call is a quality aftermarket part or full replacement rather than chasing discontinued OEM stock across three vendors. We’ll tell you which one we recommend and why. If the fixtures you’re keeping need a small bathroom remodel or a tub-to-shower conversion to make the layout work, that’s where we integrate Toto into a larger scope.

A quick call is what settles the repair-or-replace question honestly. Call (888) 590-9867 and we’ll give you straight talk, not a sales pitch.

Our Toto Service Process – Step by Step

  1. 1
    Diagnosis. We confirm the model – Drake CST743, Drake II CST454, Ultramax II MS604, Washlet S500e, S550e, C5, or a Toto EcoPower/Prominence faucet – then trace the symptom to the actual cause. Running toilet? We test fill valve and flush tower separately. Washlet not spraying? We check inlet filter and nozzle before electronics.
  2. 2
    Written scope and repair/install plan. Before any work starts: parts list, labor, price, and anything that might shift. No open-ended “we’ll see what we find.”
  3. 3
    Repair or install. OEM fill valves, tower gaskets, Washlet components, cartridges, and trim. Supply lines and shut-off valves checked and replaced if they’re marginal – no point putting a new toilet on a shut-off that won’t hold.
  4. 4
    Test and verify. Refill level, flush cycle, tank seal (no ghost flushing overnight), Washlet spray pressure and nozzle function, faucet flow and shut-off. We don’t leave until every function we touched works the way the manufacturer’s spec says it should.
  5. 5
    90-Day Done Right Promise. Written on the contract. If it’s not right, one call brings us back.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Toto Products We Service & Install in Arlington

Our Toto service work covers the Drake and Drake II two-piece toilets (CST743, CST454 series), the Ultramax II one-piece toilets (MS604 series), the Washlet and WASHLET+ bidet seats (S500e, S550e, C5 and compatible WASHLET+ models), and the EcoPower and Prominence hand-wash sinks and faucet lines. We service these across Arlington’s full housing mix – 1950s and 1960s ranch homes in central and east Arlington where the bath is original and the flooring may be pier-and-beam, and 1990s through 2000s builds in south and far north Arlington where the layout is more forgiving but the plumbing is now old enough to need the same attention.

We Also Service These Brands

Barrett & Sons works across the bath and kitchen brands that surround Toto in North Texas homes: KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures. That matters because most Toto jobs – especially a small bathroom remodel or a tub-to-shower conversion – touch more than one brand. We won’t hand you off to a specialist for every fixture in the room.

FAQs – Toto Construction Service in Arlington

Is Barrett & Sons Construction Arlington authorized by Toto?
No. We’re an independent service provider with no manufacturer authorization or affiliation, which means we can’t process Toto warranty claims on your behalf. We can install genuine Toto parts, service Toto fixtures, and give you an honest opinion on whether a warranty claim is worth pursuing through the manufacturer directly.

Do you use genuine Toto/OEM parts?
Yes, for fill valves, flush tower gaskets, and Washlet components where the fixture is worth keeping. On out-of-production parts or where the fixture value doesn’t justify the OEM wait, we’ll recommend a quality aftermarket part and tell you exactly what the tradeoff is. Call (888) 590-9867 for an exact parts and labor quote – estimates are free.

How long does Toto service take?
Most single-fixture repairs – a Drake fill valve, a flush tower gasket, a Washlet filter clean – are done in a single visit. A tube-to-shower conversion or small bathroom remodel with Toto integration runs longer and gets a written schedule before a nail moves. Call (888) 590-9867 to schedule your free estimate.

What Toto models/series do you cover?
We service the Drake and Drake II (CST743, CST454), Ultramax II (MS604), the Washlet and WASHLET+ seats (S500e, S550e, C5 and compatible models), and the EcoPower and Prominence hand-wash faucet lines. If your model isn’t listed, call – we’ll tell you straight if we can work on it.

Will service void my Toto warranty?
Not by itself – using appropriate OEM-equivalent parts and accepted repair methods preserves your warranty in most cases. But read your Toto warranty terms carefully before any repair, because the fine print matters more than the marketing. We don’t promise to preserve or process a warranty claim; that’s a conversation for Toto directly.

How much does Toto construction cost in Arlington?
Single-fixture repair – a fill valve, flush tower gasket, Washlet filter, or faucet cartridge – usually runs modest. Larger Toto-integrated renovation work ranges as follows:

Job Arlington Price Range
Small Bathroom Remodel (Toto fixture refresh) $5,000 – $12,000
Tub-to-Shower Conversion (Toto shower valve/trim integration) $3,500 – $10,000
Bathroom Vanity Installation (Toto sink/faucet pairing) $800 – $3,000

Call (888) 590-9867 for an exact quote – estimates are free, and every price change arrives in writing before work starts.

Book Your Toto Service in Arlington, TX

If a Drake keeps running, a Washlet’s stopped spraying, or a small bathroom remodel needs Toto fixtures integrated into the new layout, call Barrett & Sons Construction Arlington at (888) 590-9867 for a free estimate. Primary service here means written scope, permits where eligible, and the 90-Day Done Right Promise. Look up the license number yourself before you sign anything – then call us to schedule.

Written by the team at Barrett & Sons Construction Arlington.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch