Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tuff Shed Bathroom Remodeling: The Arlington Owner’s Guide
We build and install bathroom remodeling inside Tuff Shed structures in Arlington, and a full installation runs $9,000 – $28,000 depending on what you keep and what gets replaced. Scheduling is planned work, not same-day – a bathroom in a shed needs a real plan, permits, and a couple of weeks on the calendar. Most owners don’t call because a single part failed. They call because the floor near the shower door has gone soft, the ceiling started sweating, or the toilet rocks when they sit down, and they want to know whether it’s a patch job or a rebuild.
Which Tuff Shed Models This Applies To
Any Tuff Shed structure that’s been finished as a bathroom qualifies: the Premier Pro Tall, Premier Tall, Tahoe, and the garden and studio lines that get insulated and drywalled after the shell goes up. Tuff Shed builds shells, not bathrooms, so the finishing is aftermarket by definition. That’s the compatibility lesson Arlington owners need up front. There’s no bathroom spec sheet in your shed packet, and the model that matters is the one on your order paperwork and the label inside the door jamb. Find the label before you shop.
The other gotcha: floor systems change by model and by year. A Tahoe built on a standard joist layout handles a shower pan differently than one built with a wider span, and the stud spacing behind your walls may be 16″ or 24″ on center. Tuff Shed has revised trim and fastener packages across model years, so a vanity or shower surround that dropped into a neighbor’s shed may not match yours. Measure your floor-to-wall intersections, stud centers, and door rough opening, and write the numbers down. If you’re weighing OEM cabinetry versus quality aftermarket lines we install – KraftMaid, Cambria, Silestone – the aftermarket side usually wins once the measurements are confirmed, since Tuff Shed doesn’t supply bathroom fixtures to begin with. Barrett & Sons Construction Arlington is an independent service provider and is not affiliated with Tuff Shed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tuff Shed Bathroom Remodeling Is Failing
These are the five failures we see most in Arlington, listed with the cause behind each:
- Soft or springy floor near the shower and toilet. Water has reached the subfloor under the pan or around the toilet flange, and rot follows fast once OSB stays damp for a season.
- Ceiling and wall moisture, peeling paint, or a musty smell. Shed shells rarely have enough ventilation for a wet room. Exhaust fans get added during remodeling, not by the shell builder.
- A rocking toilet or a tub that flexes. The flange isn’t anchored into solid decking, or the subfloor has compressed under the fixture.
- Mold or dark staining at the base of walls. Likely flashing or sealant failure where the finished room meets the shed shell, letting summer storms push water inward.
- A door that sticks, or tile cracks that reopen after repair. The structure is moving. Framing wasn’t stiffened for the weight of tile and a water-filled shower system.
Arlington sits on heavy black clay, and that soil moves a lot between wet springs and dry summers. The movement finds weak framing and shows up first in tile, doors, and fixtures.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full bathroom remodel in a Tuff Shed in Arlington runs between $9,000 and $28,000 installed. The number moves on three things: whether the subfloor and framing need repair, what fixtures you choose, and how much plumbing has to be rerouted. Small layouts run $5,000 – $12,000, a walk-in shower alone runs $4,500 – $12,000, and a tub-to-shower conversion runs $3,500 – $10,000.
Every quote we write is line-itemed, with labor separate from materials and every allowance in writing. If the scope changes after work starts, you get a written change order before anyone touches the job. Permits get pulled and inspections signed on every eligible job, and the finished work carries our 90-Day Done Right Promise. Call for a free estimate and we’ll walk the shed with you.
DIY or Call Us?
You can safely do the inspecting. Look under the shed for rot and standing water, check the toilet for movement, watch the shower pan for flex, and run the exhaust fan with a tissue against the grille to see if it actually draws. Those checks tell you a lot and cost nothing.
What we don’t suggest for this work: opening floors, reworking plumbing, or patching a subfloor without understanding the framing under it. A shower pan set on a questionable floor fails again within the year, and clay movement in Arlington will find the mistake. Waterproofing details are where DIY bathroom projects go wrong most often – a pan that’s tiled well but flashed badly leaks quietly for months. Call (888) 590-9867 and we’ll tell you honestly whether you’re looking at a patch or a rebuild.
FAQs
A properly built one lasts 20 to 30 years, but the shell materials around it shorten that timeline in Texas. Shed shells deal with intense summer heat, spring storms, and clay movement, so the finished room’s waterproofing and ventilation matter more than in a house. Failing exhaust fans and loose pan flashing are what cut lifespan short.
Often yes, if the damage is caught early. A rocking toilet, a worn fan, or a failing bead of sealant is a repair. A soft subfloor under a shower pan, or repeated tile cracks over a moving floor, usually means tear-out and rebuild. We’ll tell you which one you’re facing before any work begins.
A focused replacement like a vanity, shower, or tub-to-shower conversion takes a few days to about two weeks. A full bathroom build in a shed runs two to four weeks once permits are in hand. We schedule it and give you a real timeline, not a promise of same-day.
We source fixtures and materials from named manufacturers we can show you – KraftMaid, Cambria, Silestone, and other premium lines – and match them to your shed’s actual measurements. Every material goes on the quote by name before you sign. Call for a free estimate and we’ll come measure.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.