Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Driveway & Pavers: The Arlington Owner’s Guide
We install Unilock driveway and paver systems across Arlington, and a full paver driveway typically runs $7,000 – $18,000 installed depending on square footage, base prep, and pattern. A paver patio lands between $3,500 and $11,000. Most Arlington owners discover a problem the same way: a paver rocks underfoot by the mailbox, a rut opens at the driveway apron where the concrete meets the street, or a few units near a downspout sink and let water pool against the garage slab. Sometimes it’s moss creeping across the joints on the shaded side of the house, or an edge restraint that has pushed out toward the lawn. None of that means the whole driveway is shot. It usually means one section, one base layer, or one edge gave up first, and the fix starts with figuring out which. Barrett & Sons Construction is an independent installer and is not affiliated with Unilock.
Which Unilock Models This Applies To
Unilock makes a wide family of pavers, and each one fails in its own way. Structural slab-style units like the Brussels Block and the Brussel’s Dimensional Series are thick, tightly fitted, and depend heavily on a properly compacted base. Interlocking systems like the Beacon Hill and the Town Hall line rely on chamfered edges and a specific joint sand to lock together, so a joint that washes out loosens the whole field around it. Permeable and plank profiles, including the line of linear “plank” pavers Unilock sells for driveway aprons and walkways, need open-graded base and a different joint aggregate than a standard driveway.
To identify what you have, measure the face of a single unit and note the finish and the edge profile: a tumbled or chamfered edge points to one family, a crisp modern face to another. Look under an edge restraint for a stamp or a manufacturing mark. From there it’s the OEM-versus-equivalent decision: matching OEM units keep the color and texture consistent block to block, which matters most on a visible front driveway. A quality equivalent can save money on a hidden section or a utility cut, but it will read slightly different in sunlight. Unilock’s own warranty also runs through registered installers, so confirm the coverage terms before you buy material for a DIY patch.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Driveway & Pavers Is Failing
- Rutting or settling at the apron and near the garage. That’s almost always a base failure, not a paver problem: soil that wasn’t compacted in lifts, or water finding a low spot and pumping fines out from under the units.
- Loose joint sand and shifting units. Sand washes out through a failed edge or a missing restraint, and once the joints open, the interlock that holds the field together is gone.
- Efflorescence, the white chalky film on the surface. Common in North Texas after a wet spring; it’s salts migrating up through the paver, and it often clears on its own but can signal water sitting in the base.
- Heaving and rocking units. Our shrink-swell clay soil expands when wet and contracts when dry, and a base that wasn’t deep enough will push pavers up and out of plane.
- Cracked or chipped units at the driveway edge. Vehicle weight over an unsupported edge breaks pavers fast, and a cracked unit left in place lets water into the base and speeds the next failure.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Arlington, a full Unilock-compatible paver driveway install runs $7,000 – $18,000. A paver patio runs $3,500 – $11,000. What moves you up or down that range: square footage, how much of the old surface has to come out, base depth and excavation, edge restraint, and whether drainage has to be reworked. Most of the money is in the parts you can’t see, which is the honest reason two bids on the “same” driveway can differ by thousands.
Our quotes are line-item and in writing, with the base, the paver, the edge, and the joint aggregate each priced separately, so you can see exactly what you’re paying for. We pull permits where the work requires them. Every finished job is backed by the written 90-Day Done Right Promise: if something isn’t right, one call brings Tom back.
DIY or Call Us?
A few things you can safely check on your own: walk the driveway and mark where units rock, look for sand washing out at the edges, and check that downspouts discharge away from the surface rather than onto it. Basic cleaning and re-sanding of an open joint are within reach for a handy homeowner.
Where DIY goes wrong is the base. Lifting and resetting pavers without fixing the compacted layer underneath just moves the failure a few feet down the driveway, and doing it wrong on a structural slab can crack units under vehicle weight. Rebuilding an edge restraint or re-grading for drainage is real excavation work, not a weekend project. If the surface is heaving or water is pooling against the house, call us at (888) 590-9867 for a free estimate. We also install KraftMaid, Cambria, and Silestone on the interior side when a driveway project turns into a bigger remodel.
FAQs
A properly installed paver driveway should hold up 25 to 30 years or more, and often longer, because individual units can be lifted and replaced without tearing out the whole surface. The lifespan in Arlington depends far more on the base and drainage than on the paver itself, since our clay soil and heavy spring rain are what test a driveway. Get the base and drainage right and the pavers will outlast the installation that put them down.
Yes, and usually it should be. A single rocking unit, a settled section, or a washed-out edge is often a targeted repair, not a whole-driveway replacement. We lift the affected units, correct the base underneath, re-set the pavers, and re-sand the joints. Call (888) 590-9867 for an exact quote, and estimates are free.
A small repair is typically a one-day job; a full paver driveway install usually runs several days from excavation through final compaction and joint sand. The range comes down to square footage and how much base work the site needs. We’ll give you a realistic schedule with the written estimate, not a phone number that changes on arrival.
We match the specific Unilock family and profile to your existing field by measuring the unit face, checking the edge profile, and reading any manufacturing mark under the edge restraint, then order the OEM units or a color-matched equivalent for hidden sections. Barrett & Sons Construction is an independent installer and is not affiliated with Unilock. Call (888) 590-9867 to schedule a free estimate and we’ll identify what you have before quoting a single paver.
When your Unilock driveway or patio needs a repair or a full install, call (888) 590-9867 to schedule your free estimate with Barrett & Sons Construction Arlington. You’ll get a live person, an in-writing line-item quote, permits pulled where required, and the 90-Day Done Right Promise on the work.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.