Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Kitchen Remodeling: The Arlington Owner’s Guide
Kitchen remodeling in Arlington with Unilock-compatible materials typically runs $14,000 – $45,000 installed, depending on cabinet layout, countertop square footage, and whether the plumbing or electrical has to move. We’re an independent crew and not affiliated with Unilock, but we install the brand and we know its quirks in North Texas heat. Most Arlington owners don’t discover a failing Unilock assembly all at once. It shows up slowly: a cabinet door that won’t sit flush anymore, grout lines opening along a backsplash, or a laminate top lifting at the seam after a humid summer. By the time it’s obvious, the water damage underneath has usually been working for a year or more.
Which Unilock Models This Applies To
Unilock kitchen lines come in several series, and the part that fits one won’t fit another. The fastest way to identify what you have is the label inside the cabinet door or on the underside of the countertop – most Unilock assemblies carry a model code and a production date stamped there. Measure the cabinet box depth (standard is 24 inches, but Unilock’s European-style lines run 23¼) and the countertop overhang before you order anything. That quarter-inch matters: it’s the difference between a drop-in fit and a return.
On the OEM-versus-aftermarket question, we tell Arlington homeowners this: for cabinet hardware and hinges, a quality aftermarket equivalent (Blum, Grass) often outperforms the original. For frameless cabinet boxes and drawer slides matched to a specific series, stick with the OEM or a verified compatible replacement. Unilock’s slide profiles changed between production runs, so a slide that fits a 2018 cabinet may not fit a 2021 cabinet of the same model name. Pull the existing slide and match the mounting screw pattern before you buy.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Kitchen Remodeling Is Failing
Here’s what we actually see on Arlington jobs, and what’s usually behind it:
- Cabinet doors that drag or won’t close flush. The hinge plate has wallowed out its screw holes, or the box has shifted on its shims. In Arlington’s clay soil, foundation movement transfers straight up through the cabinet run and racks the frames out of square.
- Laminate or veneer lifting at seams and edges. Moisture has gotten under the skin, usually from a dishwasher leak or a slow supply-line drip. Texas summer humidity speeds up the delamination once it starts.
- Soft or spongy spots in the countertop. The substrate (particleboard or MDF) has swollen from water exposure. Once it swells, it never goes back – the top has to come off.
- Drawer slides that bind or grind. The slide is worn, or the cabinet box is out of square and the slide is fighting it. Grinding usually means the bearings are shot and the slide needs replacing.
- Grout cracking or caulk failing at the backsplash. Normal settling, or the backsplash was installed without a flexible joint at the counter. Arlington’s seasonal soil movement makes that joint non-negotiable.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Arlington, here’s what the work actually runs:
| Scope | Installed Range |
|---|---|
| Full kitchen remodel (Unilock-compatible) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: cabinet count and door style, countertop material and edge profile, whether plumbing or electrical moves, and whether the substrate is sound or water-damaged. Every scope, every allowance, and every price change arrives as a written change order before work happens. No surprise invoices at the end. Our technicians have up to 28 years of experience, every eligible job gets permits pulled and inspections signed, and the work is backed by our written 90-Day Done Right Promise.
DIY or Call Us?
There’s a real split here. An owner can safely check a lot of things: open the cabinet doors and look for water staining, test drawer slides by hand, press on the countertop for soft spots, look under the sink with a flashlight. That diagnostic work is free and worth doing.
Where DIY goes wrong: pulling a cabinet run without knowing what’s behind it (wiring, plumbing, or a load-bearing wall), re-hinging doors and getting the reveal off by an eighth of an inch, or setting a countertop on a substrate that’s still wet. We’ve been called to more than one Arlington kitchen where a homeowner started the demo and found a slow leak that had been running for months. If a supply line is involved, shut the water off at the valve and call us before you touch anything else.
Call (888) 590-9867 to schedule a free estimate. We answer the phone with a live person, 24 hours a day.
FAQs
With proper installation and no water intrusion, a Unilock cabinet box and countertop assembly should last 15 to 25 years. In Arlington’s climate, the two killers are humidity under the sink and foundation movement racking the frames. Keep the caulk joints sealed and address plumbing leaks immediately, and you’ll get the upper end of that range. Call (888) 590-9867 for an exact quote – estimates are free.
Often yes. A worn hinge or drawer slide is a $15 to $40 part and a 20-minute swap. Swollen substrate under a laminate top cannot be repaired – the top has to come off and the substrate replaced. We tell you which you’re dealing with before we quote anything. Call (888) 590-9867 for a free second opinion on any written estimate.
A single cabinet or slide replacement is usually done in under two hours. A full cabinet run or countertop replacement typically runs three to seven days, depending on whether the substrate needs work and whether permits are required. We give you the schedule in writing before we start. Call (888) 590-9867 to get on the schedule.
We identify your model from the label code and match the part to Unilock’s current compatibility chart, or to a verified aftermarket equivalent when the OEM is discontinued. We don’t stock parts and we don’t carry them on a truck – we source to your model and confirm the fit before we order. Call (888) 590-9867 and have your model code ready.
Other brands we also service: KraftMaid, Cambria, Silestone.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.