Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Bathroom Remodeling: The Arlington Owner’s Guide
Wellborn bathroom remodeling in Arlington typically runs $9,000 to $28,000 installed, and we can usually get out to look at your failing bath within a few days of your call. That range covers the full job: cabinetry, the wet areas, tile, fixture setting, and the finish work that makes it hold up. Homeowners in Arlington usually don’t go looking for Wellborn support until something fails first. A drawer front that won’t sit flush against a well-used vanity. A finish coat lifting along a cabinet edge after years of steam from the shower. A soft-close hinge that quit closing softly. One look at the label inside the door, and the call goes out.
Which Wellborn Models This Applies To
Wellborn builds for a lot of different budgets, and the parts aren’t the same across the lines. Their all-plywood and framed cabinet lines use different hinge patterns, different drawer glide mounts, and different touch-up and finish specs. The good news is Wellborn labels the inside of every door and drawer box with the series, the finish color, and often a production date. That label is your starting point, and we read it before we order anything. Snap a photo of it and the cabinet box edge, and you’ve solved most of the compatibility question right there.
Pay attention to box depth and rail width before you assume a replacement part fits. A 12-inch-deep bath vanity cabinet and a standard-depth base cabinet can share the same door style but not the same hinge or glide hardware, and that’s the headache most Arlington homeowners run into. On the OEM-versus-aftermarket question: original Wellborn parts keep the fit exact and the finish matched, which matters in a visible bathroom. A quality aftermarket hinge or glide will get you closing again for less money, but if you’re chasing a specific finish color, stay with the factory part. We source the part and set the install on one written scope, so you know what’s coming before the first cabinet door comes off.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Bathroom Remodeling Is Failing
- Doors that drag or scrape along the bottom rail. Usually a worn hinge or a cabinet box that’s shifted on its shims; in Arlington’s clay soils, foundation movement shows up first in the tight tolerances of cabinet doors.
- Soft-close drawers that slam. The glide mechanism or the soft-close cam has worn through. On that style of drawer, it’s the cam that fails, not the wood, and the drawer still holds until it’s fixed.
- Finish peeling or checking near the shower and tub. Years of steam and the alternating dry heat and humidity of a North Texas bathroom work on the finish at the edges. This is a finish problem more than a structural one.
- Water stains or soft spots at the cabinet base. A slow tub or shower leak wicking into the toe kick. That one needs a closer look because the wood behind the finish tells you how far it’s gone.
- Doors that won’t stay closed or sit proud of the face frame. Hinge adjustment or warp from moisture. Warped wood isn’t a parts fix, which is where a real look at the cabinet helps.
Replacement Cost & What’s Included
Bathroom work in Arlington priced around Wellborn runs $9,000 to $28,000 for a full remodel. A focused vanity replacement sits at $800 to $3,000. A shower replacement runs $3,000 to $8,500, and a tub-to-shower conversion comes in at $3,500 to $10,000.
| Scope | Installed Range |
|---|---|
| Bathroom remodel (full) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Bathroom vanity installation | $800 – $3,000 |
| Shower replacement | $3,000 – $8,500 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
What moves the number: how much framing and plumbing has to be opened, whether the wet area gets redone to current codes, the tile and finish selections, and whether the job needs a permit. We put the scope, the allowances, and the parts in writing before any work starts. The permit inspector works for you, not for us, which is exactly why we pull them on every Arlington job that needs one. Every completed job carries our 90-Day Done Right Promise in writing.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Here’s the honest split. You can safely photograph the labels, measure the cabinet box and door, check underneath for water staining, and reset a door that’s slipped on its adjusters. What tends to go wrong is the plumbing and electrical side. Opening a vanity or shower wall puts you near water supply lines and, in many Arlington bathrooms, the electrical that feeds a vanity light or a GFCI outlet. That work belongs with someone who knows what they’re looking at, both for your safety and because a hidden leak behind a finished cabinet is a much bigger bill than the one you were trying to avoid.
We’re licensed and insured, we put the price in writing, and there’s no surprise invoice at the end. Call (888) 590-9867 to schedule a free estimate.
FAQs
Under normal use, Wellborn cabinet finish and hardware hold up well for 15 to 20 years, but in a North Texas bathroom with hard water and a lot of humidity swings, expect to replace hinges or glides well before that. Plenty of Arlington homes see soft-close glides wear out in 8 to 12 years. Call (888) 590-9867 for an exact quote; estimates are free.
Often, yes. A worn hinge, a failed glide, or a lifted edge on one finish spot can usually be repaired without a full cabinet swap. If the cabinet box itself has warped or water damage has spread, replacement makes more sense. We’ll tell you which one you’re looking at.
A hardware or vanity swap runs a few hours to a day. A full bathroom remodel in Arlington takes longer, and we’ll put the schedule in writing before we start. You’ll know the timeline, not a guess.
We read the label inside your cabinet, confirm the series and finish, and order the part to match. We don’t carry stock, so the right part comes in for your job rather than an off-the-shelf substitute. For kitchens and other rooms, we also install KraftMaid, Cambria, and Silestone.
Let’s Get Your Arlington Bathroom Fixed Right
Barrett & Sons Construction Arlington is an independent bathroom and kitchen contractor. We’re not affiliated with Wellborn. You get the same treatment we’ve given neighbors across Arlington for years: a name and license you can look up, a live person on the phone, and a written scope and price before anything moves. Call (888) 590-9867 for a free estimate and a free second opinion on any written estimate you’ve already got. Senior and veteran discounts are permanent, and the phone is answered around the clock.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington and nearby areas.