Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Cabinet Refacing Costs in Arlington, TX (And What Most Quotes Leave Out)
Refacing kitchen cabinets in Arlington, TX typically runs $3,500-$9,000 for boxes that are plumb, dry, and structurally sound. Shave a few dollars off if a national outfit quoted you that on the phone. The number climbs by $500-$1,500 when the existing boxes need repair before veneers go on, which older Arlington tract homes need more often than not. Call (888) 590-9867 and we’ll send someone out to assess the box before we quote a dollar amount. Free estimate, no trip charge inside the county.
Here’s what we know after enough trips through central Arlington to fill a notebook: a lot of kitchens in these brick ranches went up when Gerald Ford was president. The boxes look solid from the doorway. Pull a drawer, and the plywood may be delaminated from half a century of steam, popcorn, and dishwasher moisture. That detail is the one most refacing quotes never bother to look for.
Why the “Cheap” Refacing Quote in Arlington Goes Sideways
Online calculators assume a box that’s plumb, dry, and square. That works for a 1990s subdivision off Green Oaks. It’s a coin flip in the 1950s-70s brick ranches across east Arlington, where we regularly find particleboard cabinet sides that crumble when you loosen a hinge screw, and 1960s-70s installs built to older code with non-standard depths that don’t match today’s stock veneer sheets.
Non-standard depth is the quiet cost driver. A stock sheet cut to fit a standard 24-inch box is fast. A 1960s-era box at an odd depth means custom-cutting the veneer and trim, and that’s real labor across ten doors. Custom-cut veneer can add $500-$1,500 versus stock sheets before any repair. A calculator that quotes you $4,000 flat never asked to look inside your kitchen.
The bigger risk: skipping the box assessment to protect a low number. Reface a box that’s wet or out of square, and you’ve paid to hide a problem that comes back as clicking hinges, sagging doors, and separation at the seams. Thermostat swings in a North Texas summer make it worse. A box that shifts in the heat and takes on moisture in the spring is a bad candidate for a veneer no matter what the catalog shows.
Our Written Box Assessment Process (and Why It Changes the Numbers)
We don’t quote refacing until we’ve put the box condition in writing. That’s the core of how Barrett & Sons Construction Arlington prices this work.
- We inspect the box, not just the doors. We pull a drawer, check the frame for plumb and square, probe for moisture or delamination at the bottom rail and under the sink, and note any hinge point that won’t hold a screw.
- We document what we find in writing. If the box needs repair, that repair shows up as a written line item before any laminate or veneer gets ordered. Scope in writing, allowances in writing, change orders in writing.
- Every price change becomes a change order before work starts. The allowance that isn’t on paper is a surprise waiting for a date; we’d rather you see the surprise on a page you signed than on an invoice after the fact.
- You agree to the final number before we order a single door front. That’s how the quote you get is the number you pay.
If the inspection shows the boxes are past saving, we’ll tell you straight and point you toward a Kitchen Remodeling plan that makes more sense than veneer on failing particleboard. No pressure to reface a box that won’t hold.
What Refacing Actually Costs in Arlington
These are the ranges we work from for Arlington kitchens. Every job sits somewhere in here, and where it lands depends on box condition, door count, and the door brand you choose.
| Refacing Line Item | Typical Range |
|---|---|
| Cabinet refacing, sound boxes (door fronts, veneer, hardware) | $3,500 - $9,000 |
| Box repair (delamination, re-squared frames, reinforcement) | $500 - $1,500 |
| Custom-cut veneer for non-standard 1960s-70s depths | $500 - $1,500 |
| Named-brand door fronts (e.g. KraftMaid) vs. generic catalog doors | 5% - 15% premium |
| New countertop, if the reface is paired with a surface swap | $2,000 - $6,500 |
| New backsplash | $800 - $2,500 |
For the full picture, adding a countertop and backsplash alongside refacing can land the whole project in the $14,000-$45,000 range that a full kitchen remodel occupies. That range reflects a broader remodel scope, so if you’re weighing the two paths, it’s worth walking through what each one actually buys you before you decide.
Why Door Brand Matters in Arlington’s Humidity Swing
A KraftMaid door front is something you can look up, spec for spec, before you sign anything. That matters when a door is going to live through North Texas humidity swings and the heat cycling of a south-facing kitchen wall. A mystery-brand door off a van is a door nobody can verify, and it’s the first thing to swell, warp, or lose its finish when the seasons fight back.
The premium for a named brand is real money, usually a 5%-15% bump over a generic catalog door. But when you can put your hands on the actual product specs and confirm what you’re getting, that’s a different kind of confidence than hoping a guy with a sample book was straight with you. We carry premium brands across the trades for exactly this reason: materials you can verify, not mystery brands.
What the 90-Day Done Right Promise Covers on a Reface
Hinge alignment is the most common callback in this trade. A door that swings crooked, a hinge that loosens a screw because the original hole was tired, a seam that opens two weeks after the crew leaves. This is where the written 90-Day Done Right Promise matters. If a door front warps or a hinge fails within 90 days, one call brings the crew back. It’s written on every contract, not buried in fine print.
We also pull permits and get inspections signed on eligible jobs, because the permit inspector works for you and it’s a written record that the work was done to code. The last contractor many Arlington homeowners used told them permits were optional. That’s not how it works here.
When a Reface Makes Sense, and When It Doesn’t
Refacing is worth considering when:
- The boxes are solid, plumb, and dry after inspection.
- You’re keeping the same layout and don’t need to move plumbing or electrical.
- You want updated faces and hardware without the demo and downtime of a full remodel.
- The budget is tighter than a full kitchen remodel range.
Refacing is the wrong call when the boxes are water-damaged under the sink, badly out of square from past foundation movement, or you’re changing the footprint entirely. We’d rather tell you that up front than sell you a veneer that hides a problem.
FAQs
Cabinet refacing in Arlington runs $3,500-$9,000 for boxes that are sound. Add $500-$1,500 if the boxes need repair before veneers go on, which is common in the older brick ranches across central and east Arlington. Call (888) 590-9867 for an exact quote built from a written box assessment; the estimate is free.
Refacing is almost always cheaper than full replacement when the boxes are worth keeping, since you’re paying for faces and hardware instead of new boxes and installation. If the inspection finds wet or crumbling particleboard, replacement or a broader remodel can save you money in the long run. Call (888) 590-9867 and we’ll tell you which side of that line your kitchen is on.
Yes. The 1960s-70s kitchens in east Arlington were often built to older code with odd depths, which means custom-cut veneer instead of stock sheets. That adds labor, usually $500-$1,500, but it’s the honest way to do it. We document the depth and the custom cut in writing before anything is ordered. Call (888) 590-9867 to get started.
If a door front warps or a hinge fails within 90 days, one call brings the crew back at no charge under the written 90-Day Done Right Promise. Call (888) 590-9867 and we’ll get it sorted.
Get a Written Number Before You Sign Anything
Refacing is worth doing right: boxes inspected, allowances on paper, a named door brand you can look up, and a written 90-day promise behind every hinge. Our technicians have up to 28 years of experience, and every change order arrives before the work, not after the invoice. Call (888) 590-9867 for a free estimate, no trip charge inside the county. Explore more at our home page or dig into the full Kitchen Remodeling in Arlington service. A live person answers, 24/7.
Written by the team at Barrett & Sons Construction Arlington, serving Arlington, TX.
What Our Customers Say
"Addition over the garage matched the original roofline and brickwork so closely that visitors do not realise it was added. He tracked down the closest brick he could find rather than settling."
- Gideon Stroud"Tom Barrett was on our job most days himself, not just at the quote and then never again. When something needed deciding there was an actual person to decide it with."
- Rosalie Pemberton"His sons run the crews and they were in our house for four months. Not once did I feel I had to be home to keep an eye on things."
- Camila Fuentes