A Barrett company - serving Arlington, TX

KraftMaid Construction Service in Arlington, TX

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Arlington Homeowners Choose KraftMaid Construction

Barrett & Sons Construction Arlington provides independent KraftMaid construction service in Arlington: cabinet re-squaring, hardware replacement, refacing, countertops, and full kitchen layout work on KraftMaid Vantage, Choice, Prelude, and Passage cabinetry. We are not affiliated with, authorized by, or sponsored by KraftMaid. We’re an independent construction team working on KraftMaid installations every week across the Dallas – Fort Worth area. Our crews know the drawer slides, hinge hardware, and finish quirks that show up in local homes, and our technicians have up to 28 years of experience. Call (888) 590-9867 for a free estimate.

Call (888) 590-9867

Arlington runs heavily on KraftMaid. The 1990s and 2000s subdivisions in south and far north Arlington went up during the years KraftMaid was the semi-custom cabinet most builders offered, and plenty of those kitchens are still working thirty years later. Now the corners are opening. The soft-close has gotten soft without closing. If your kitchen is one of them, you already know which drawer it is.

Why Trust Barrett & Sons Construction Arlington for Your KraftMaid Construction?

KraftMaid’s semi-custom promise sits on a limited-lifetime warranty, and that warranty is worth using. To use it well, somebody has to know the model line, the purchase date, and which parts the manufacturer will actually replace for the original owner. That’s where we start. Before we quote anything, we read the cabinet box for the series label, ask when it went in, and check whether the part in your hand is a warranty replacement, a matching aftermarket part, or a box that’s past saving.

Semi-custom construction is not the same as builder-grade. KraftMaid boxes use specific joinery, the drawer slide bore patterns differ between lines, and aftermarket hardware that fits a Vantage box may not fit a Passage full-access pull-out. Our crews have installed and serviced these cabinet lines long enough to know the difference on sight, and our technicians have up to 28 years of experience in kitchen and bath work. That matters more than brand badges. A hinge is a hinge until it’s the wrong bore depth and the door sits a half-inch off the fan.

As an independent KraftMaid service provider, we’re honest about what we can and can’t do. We can’t file a warranty claim in your name. We can tell you what you’re likely entitled to, help you document it, and handle the installation once the part lands. Every eligible job gets permits pulled and inspections signed. Every price change arrives as a written change order before work moves. That’s written into every contract, along with our 90-Day Done Right Promise.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common KraftMaid Construction Problems We Fix in Arlington

These are the failures we see on KraftMaid kitchens in Arlington, mapped to the lines they show up in.

  • Vantage and Choice boxes separating at the corner joints. Arlington summers push indoor humidity high enough that cabinet panels swell and shrink with the seasons. On Vantage and Choice boxes, the corner joints take that movement first and start to gap. A drawer box that squeaks or rubs is often a symptom, not the actual problem.
  • Full-overlay doors warping or rubbing on Passage and Prelude lines. Passage and Prelude run full-overlay fronts, which look great but leave very little clearance between door and frame. After years of heat cycling in a North Texas kitchen, the door panel can cup or the hinge can drift, and the front starts rubbing the frame on close. That rub wears the finish at the top edge, which is where most people first notice it.
  • Undermount drawer slides losing soft-close tension. Semi-custom KraftMaid lines use undermount slides rated for a certain weight, and a drawer holding cast iron skillets or a stack of stoneware will eventually sag past that rating. The mechanism isn’t broken. It’s tired.
  • Factory finish checking around sink bases and dishwashers. The finish on KraftMaid fronts is durable, but the sink base and the cabinets flanking the dishwasher get more moisture contact than any other box in the kitchen. Checking, peeling, and lifted edges show up there first, usually near the bottom rail.
  • Cabinet-to-countertop alignment drift after installation. On slab-on-clay foundations, seasonal soil movement can throw a kitchen wall slightly out of level over a decade or two. Quartz or granite counters don’t flex, so any cabinet settling shows up as a visible gap or a lip where the counter meets the backsplash.

Here is how that usually plays out in a real kitchen. A KraftMaid Vantage kitchen in a 1990s suburban home often starts showing gaps at the cabinet corners and drawers that no longer self-close after a decade of North Texas temperature swings. A qualified local pro typically pulls the affected boxes, re-squares and re-glues the joints, replaces tired soft-close slides with matching hardware, and re-hangs doors with new hinges so the full-overlay fronts align again. If the finish is checked around the sink base, the usual call is a new door and drawer front rather than a full cabinet tear-out.

KraftMaid Parts & Our Repair-vs-Replace Approach

OEM versus aftermarket on KraftMaid is not a religious question. It’s a matchup problem. KraftMaid hinges and slides are made to fit KraftMaid bore patterns, and the warranty will often cover doors, drawer fronts, and hinges for the original owner. So before we recommend a single aftermarket part, we check the model and the purchase date and see whether your box is still under warranty. If it is, we tell you. If it isn’t, we use quality aftermarket slides and hinges only when they match the bore pattern and the load rating your drawer actually needs.

We don’t stock KraftMaid parts locally. Parts get sourced per job, either through the manufacturer’s warranty channel or through suppliers who carry the correct replacement. That takes a few extra days and it’s worth it, because a matched part fits. A mismatched part turns a two-hour repair into a rework.

When it comes to repair versus replace, we’ll be plainly honest. A failing 15-year-old cabinet box is sometimes better replaced than patched, especially if the joint has failed twice or the panel has delaminated. A box that’s structurally sound with tired hardware is almost always a repair. Call (888) 590-9867 for a free estimate and we’ll tell you which one you have before you spend a dollar.

Our KraftMaid Service Process – Step by Step

  1. 1
    Diagnosis. We read the series label on your cabinet box, log the model line (Vantage, Choice, Prelude, or Passage), and check the purchase date against KraftMaid’s warranty terms. Then we test every slide and hinge in the run, not just the one that’s bothering you.
  2. 2
    Parts sourcing. If the parts qualify for warranty replacement, we help you document the claim. If they don’t, we source matching hardware to the correct bore pattern and load rating. No mystery parts, no substitutions you didn’t approve.
  3. 3
    Repair or install. Boxes get pulled, re-squared, and re-glued where the joints have opened. Slides and hinges get replaced. Door and drawer fronts get re-hung and aligned so the full-overlay fronts sit even. New installations get leveled, shimmed, and secured to the wall with the blocking the countertop material actually requires.
  4. 4
    Test. Every drawer gets opened and closed under load. Every door gets checked for rub and swing. Soft-close gets cycled a dozen times. We don’t leave until the kitchen behaves the way it did when it was new.
  5. 5
    Warranty. Every completed job is backed by our written 90-Day Done Right Promise. If something we touched isn’t right, one call brings us back. That’s on the contract, not in the fine print.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

KraftMaid Products We Service & Install in Arlington

We service all four of KraftMaid’s main cabinet lines in Arlington: the Vantage series, an entry-tier semi-custom line common in local builder kitchens; the Choice series; the Prelude series; and the Passage series, which runs full-access cabinetry with maximum interior usable space. We handle cabinet installation and refacing, kitchen design and layout, and quartz and granite countertop installation over KraftMaid boxes. That includes the blocking and leveling work quartz counters require, since a slab that doesn’t flex will telegraph any settling underneath it. If your kitchen needs a new island, a backsplash, or a full layout rethink around existing KraftMaid boxes, we scope it in writing before anything gets ordered.

We Also Service These Brands

Barrett & Sons Construction Arlington carries premium brands across every trade we touch, so we’re not dependent on a single cabinet line. Alongside KraftMaid, we work with Cambria and Silestone quartz surfaces, and Kohler and Toto fixtures in bathrooms. When we quote a kitchen or bath, the materials are named, verifiable brands you can look up, not mystery brands off a van. Same crews, same written scope, same 90-Day Done Right Promise.

FAQs – KraftMaid Construction Service in Arlington

Service Typical Range in Arlington
Cabinet Installation $4,000 – $13,000
Countertop Installation $2,000 – $6,500
Backsplash Installation $800 – $2,500
Kitchen Island Installation $3,000 – $10,000
Small Kitchen Remodel $9,000 – $20,000
Kitchen Remodel $14,000 – $45,000

The final number depends on which KraftMaid line you have, how many boxes need work, and whether the countertop gets replaced. Call (888) 590-9867 for an exact quote. Estimates are free.

Book Your KraftMaid Service in Arlington, TX

If your KraftMaid kitchen has gaps at the corners, drawers that quit closing, or a sink base finish that’s started to check, call Barrett & Sons Construction Arlington at (888) 590-9867. We’ll read your cabinet line, tell you what’s actually wrong, and quote it in writing. Free estimates, free second opinion on any written estimate, and a written 90-Day Done Right Promise on every job.

Written by the team at Barrett & Sons Construction Arlington.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 590-9867
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Barrett & Sons Construction Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch